[Fri Nov 25 15:13:38 2011] Detection parameters:
  Position = (285.3, 274.7) = 17 50 13.57 -6 42 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59854.1 +/- 831.1
  Background counts = 56.2
  Rate = 3 +/- 0.04

[Fri Nov 25 15:13:39 2011] Off-axis axis estimate = 1.97'
[Fri Nov 25 15:16:17 2011] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:16:17 2011] Initial guess for spatial extent in simple fitting = 7.41"
[Fri Nov 25 15:16:17 2011] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.669
[Fri Nov 25 15:16:17 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.41"
[Fri Nov 25 16:58:11 2011] fullrun_mos1_xmm0410180101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Nov 25 16:58:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410180101_pi300-10000_cl_pass0_src1.csv
[Fri Nov 25 16:58:11 2011] fullrun_mos1_xmm0410180101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Nov 25 16:58:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410180101_pi300-10000_cl_pass0_src1.csv
[Fri Nov 25 16:58:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410180101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410180101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 16:58:11 2011] fullrun_mos1_xmm0410180101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Nov 25 16:58:11 2011] fullrun_mos1_xmm0410180101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Nov 25 16:58:11 2011] Fit fullrun_mos1_xmm0410180101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Nov 25 17:02:00 2011] Warning, spatial fit 1 centroid is now closest to src. 3
[Fri Nov 25 17:02:00 2011] Source 1 is offset by 1.169030 and -3.436904 pixels which is larger than
2 X fitted extent = 2.045881 x 3.141021, not incorporating fit results
[Fri Nov 25 17:02:00 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 17:02:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 17:02:00 2011] Assessing source extent using major
[Fri Nov 25 17:02:00 2011] Source does appear to be extended
[Fri Nov 25 17:02:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 17:02:00 2011] Source is confused with source 3
[Fri Nov 25 17:02:04 2011] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 17:02:04 2011] Initial guess for spatial extent in simple fitting = 7.41"
[Fri Nov 25 17:02:04 2011] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.669
[Fri Nov 25 17:02:04 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.41"
[Fri Nov 25 18:34:46 2011] fullrun_mos1_xmm0410180101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Nov 25 18:34:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410180101_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 18:34:46 2011] fullrun_mos1_xmm0410180101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Nov 25 18:34:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410180101_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 18:34:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410180101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410180101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 18:34:47 2011] fullrun_mos1_xmm0410180101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Nov 25 18:34:47 2011] fullrun_mos1_xmm0410180101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Nov 25 18:34:47 2011] Fit fullrun_mos1_xmm0410180101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Nov 25 18:38:20 2011] Warning, spatial fit 1 centroid is now closest to src. 3
[Fri Nov 25 18:38:20 2011] Source 1 is offset by 1.169030 and -3.436927 pixels which is larger than
2 X fitted extent = 1.965904 x 3.131343, not incorporating fit results
[Fri Nov 25 18:38:20 2011] Source 1 is offset by -1.198366 and -3.735576 pixels which is larger than
2 X fitted extent = 3.752984 x 3.214327, not incorporating fit results
[Fri Nov 25 18:38:20 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 18:38:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 18:38:20 2011] Assessing source extent using major
[Fri Nov 25 18:38:20 2011] Source does appear to be extended
[Fri Nov 25 18:38:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 18:38:24 2011] Counts = 59854.132812, rescaling region sizes by 3.000000
[Fri Nov 25 18:38:24 2011] XMMSAS src. selection expression = ellipse(24768.953583, 23846.235321, 1957.500000, 1957.500000, 0.000000, X, Y)
[Fri Nov 25 18:38:24 2011] Writing source region out to fullrun_mos1_xmm0410180101_pi300-10000_pass1_cl_src1_src.reg
[Fri Nov 25 18:38:24 2011] Extracting stamp from image fullrun_mos1_xmm0410180101_pi300-10000_cl_sm2.00.img.gz, (173, 162) - (398, 387)
[Fri Nov 25 18:38:24 2011] XMMSAS bgd. selection expression = annulus(24768.953583, 23846.235321, 9787.500000, 19575.000000, X, Y) && !ellipse(24091.241425, 23441.502655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24871.389000, 24176.910000, 1846.999253, 1846.999253, 0.000000, X, Y)
[Fri Nov 25 18:38:24 2011] Writing fullrun_mos1_xmm0410180101_pi300-10000_pass1_cl_src1.gif
[Fri Nov 25 18:39:01 2011] Mean detx,y = (180.44, -115.17) 
[Fri Nov 25 18:39:05 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 18:49:09 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 18:49:09 2011] Setting source spectrum file to fullrun_mos1_xmm0410180101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Nov 25 18:49:09 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0410180101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Nov 25 18:56:23 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Nov 25 18:56:23 2011] rmf not generated due to insufficient counts
[Sat Nov 26 02:01:15 2011] Updating aperture counts using extracted products
[Sat Nov 26 02:01:15 2011] Error reading totcts from fullrun_mos1_xmm0410180101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Nov 26 02:01:15 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 02:01:15 2011] Using photon index=1.80, rate=2.66, arf fullrun_mos1_xmm0410180101_pi300-10000_pass1_cl_src1.arf
[Sat Nov 26 02:01:15 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 02:01:15 2011] Updating source flux to 2.4e-11
[Sat Nov 26 02:01:17 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Nov 26 02:01:58 2011] xmm0410180101/analysis//spectral/fullrun_mos1_xmm0410180101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete