[Sat Mar 10 11:16:43 2012] Detection parameters:
  Position = (267.9, 286.8) = 0 22 28.33 0 15 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 918.2 +/- 39.5
  Background counts = 114.5
  Rate = 0.04 +/- 0.002

[Sat Mar 10 11:16:44 2012] Off-axis axis estimate = 2.37'
[Sat Mar 10 11:21:41 2012] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 11:21:41 2012] Initial guess for spatial extent in simple fitting = 7.61"
[Sat Mar 10 11:21:41 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.790
[Sat Mar 10 11:21:41 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.61"
[Sat Mar 10 12:10:57 2012] fullrun_pn_xmm0407030101_pi300-10000_cl_pass0_src2.ximg exists
[Sat Mar 10 12:10:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0407030101_pi300-10000_cl_pass0_src2.csv
[Sat Mar 10 12:10:57 2012] fullrun_pn_xmm0407030101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Mar 10 12:10:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0407030101_pi300-10000_cl_pass0_src2.csv
[Sat Mar 10 12:10:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0407030101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0407030101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 12:10:57 2012] fullrun_pn_xmm0407030101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Mar 10 12:10:57 2012] fullrun_pn_xmm0407030101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Mar 10 12:10:57 2012] Fit fullrun_pn_xmm0407030101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Mar 10 13:18:28 2012] Spatial fit model total counts = 1468.260000, observed total counts = 1359.000000
[Sat Mar 10 13:18:28 2012] Offset between fit and detection position for source 2 = 0.048449 pixels
[Sat Mar 10 13:18:28 2012] 1462.157000 total counts/ 960.703000 bgd. counts: snr = 16.178436
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.048449 pixels
  Position = (267.9, 286.7) = 0 22 28.33 0 15 2.1
  Extent = 5.0 (4.6-5.4)", rotation angle = 0
  Source counts = 501.5 +/- 38.2
  Background counts = 960.7
  Rate = 0.02 +/- 0.002
[Sat Mar 10 13:18:28 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 13:18:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 13:18:28 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 13:18:28 2012] Source does appear to be extended
[Sat Mar 10 13:18:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 13:18:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 10 13:18:51 2012] Initial guess for spatial extent in simple fitting = 4.99"
[Sat Mar 10 13:18:51 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.107
[Sat Mar 10 13:18:51 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.99"
[Sat Mar 10 14:01:23 2012] fullrun_pn_xmm0407030101_pi300-10000_cl_pass1_src2.ximg exists
[Sat Mar 10 14:01:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0407030101_pi300-10000_cl_pass1_src2.csv
[Sat Mar 10 14:01:23 2012] fullrun_pn_xmm0407030101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Mar 10 14:01:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0407030101_pi300-10000_cl_pass1_src2.csv
[Sat Mar 10 14:01:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0407030101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0407030101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 14:01:23 2012] fullrun_pn_xmm0407030101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Mar 10 14:01:23 2012] fullrun_pn_xmm0407030101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Mar 10 14:01:23 2012] Fit fullrun_pn_xmm0407030101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Mar 10 15:02:48 2012] Spatial fit model total counts = 1467.790000, observed total counts = 1359.000000
[Sat Mar 10 15:02:48 2012] Offset between fit and detection position for source 2 = 0.000456 pixels
[Sat Mar 10 15:02:48 2012] 1461.768000 total counts/ 959.515000 bgd. counts: snr = 16.214242
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000456 pixels
  Position = (267.9, 286.7) = 0 22 28.33 0 15 2.1
  Extent = 5.0 (4.6-5.4)", rotation angle = 0
  Source counts = 502.3 +/- 38.2
  Background counts = 959.5
  Rate = 0.02 +/- 0.002
[Sat Mar 10 15:02:48 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 15:02:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 15:02:48 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 15:02:48 2012] Source does appear to be extended
[Sat Mar 10 15:02:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 15:03:10 2012] XMMSAS src. selection expression = ellipse(23261.706760, 24898.139000, 300.308409, 300.308409, 0.000000, X, Y)
[Sat Mar 10 15:03:10 2012] Writing source region out to fullrun_pn_xmm0407030101_pi300-10000_pass1_cl_src2_src.reg
[Sat Mar 10 15:03:10 2012] Extracting stamp from image fullrun_pn_xmm0407030101_pi300-10000_cl_sm2.00.img.gz, (251, 269) - (285, 304)
[Sat Mar 10 15:03:10 2012] XMMSAS bgd. selection expression = annulus(23261.706760, 24898.139000, 500.514014, 1001.028029, X, Y)
[Sat Mar 10 15:03:10 2012] Writing fullrun_pn_xmm0407030101_pi300-10000_pass1_cl_src2.gif
[Sat Mar 10 15:13:38 2012] Mean detx,y = (982.77, -503.64) 
[Sat Mar 10 15:13:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 15:14:06 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 15:14:07 2012] Setting source spectrum file to fullrun_pn_xmm0407030101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 10 15:14:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0407030101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Mar 10 16:43:50 2012] Updating aperture counts using extracted products
[Sat Mar 10 16:43:50 2012] Error reading totcts from fullrun_pn_xmm0407030101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 10 16:43:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 16:43:51 2012] Using photon index=1.80, rate=0.0234, arf fullrun_pn_xmm0407030101_pi300-10000_pass1_cl_src2.arf
[Sat Mar 10 16:43:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 16:43:51 2012] Updating source flux to 7e-14
[Sat Mar 10 16:45:46 2012] Reading fit data from xmm0407030101/analysis//spectral/fullrun_pn_xmm0407030101_pi300-10000_pass1_cl_src2_pl.csv
[Sat Mar 10 16:45:46 2012] Spectral fit parameter nH value = 3.56732e+20
[Sat Mar 10 16:45:46 2012] Spectral fit parameter PhoIndex value = 1.99588
[Sat Mar 10 16:45:46 2012] Failed to get F(0.3-8.0) from xmm0407030101/analysis//spectral/fullrun_pn_xmm0407030101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Mar 10 16:45:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 16:45:46 2012] Using Nh = 3.6e+20, photon index=2.00, rate=0.0234, arf fullrun_pn_xmm0407030101_pi300-10000_pass1_cl_src2.arf
[Sat Mar 10 16:45:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 16:45:46 2012] Updating source flux to 6.8e-14