[Sat Mar 10 11:17:52 2012] Detection parameters:
  Position = (257.1, 433.0) = 0 22 31.46 0 25 39.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.1 +/- 13.7
  Background counts = 13.4
  Rate = 0.007 +/- 0.0009

[Sat Mar 10 11:17:52 2012] Off-axis axis estimate = 10.21'
[Sat Mar 10 12:35:25 2012] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 12:35:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 10 12:35:25 2012] Initial guess for spatial extent in simple fitting = 11.53"
[Sat Mar 10 12:35:25 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.907
[Sat Mar 10 12:35:25 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 11.53"
[Sat Mar 10 13:18:20 2012] fullrun_mos2_xmm0407030101_pi300-10000_cl_pass0_src6.ximg exists
[Sat Mar 10 13:18:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0407030101_pi300-10000_cl_pass0_src6.csv
[Sat Mar 10 13:18:20 2012] fullrun_mos2_xmm0407030101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Mar 10 13:18:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0407030101_pi300-10000_cl_pass0_src6.csv
[Sat Mar 10 13:18:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0407030101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0407030101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 13:18:20 2012] fullrun_mos2_xmm0407030101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Mar 10 13:18:20 2012] fullrun_mos2_xmm0407030101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Mar 10 13:18:20 2012] Fit fullrun_mos2_xmm0407030101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Mar 10 13:18:38 2012] Spatial fit model total counts = 228.464000, observed total counts = 228.000000
[Sat Mar 10 13:18:38 2012] Offset between fit and detection position for source 4 = 0.188512 pixels
[Sat Mar 10 13:18:38 2012] 225.835600 total counts/ 153.641000 bgd. counts: snr = 5.824399
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.188512 pixels
  Position = (256.9, 432.9) = 0 22 31.52 0 25 38.1
  Extent = 6.5 (4.9-8.3)", rotation angle = 0
  Source counts = 72.2 +/- 15.0
  Background counts = 153.6
  Rate = 0.003 +/- 0.0005
[Sat Mar 10 13:18:38 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 13:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 13:18:38 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 13:18:38 2012] Source does appear to be extended
[Sat Mar 10 13:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 14:25:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 10 14:25:54 2012] Initial guess for spatial extent in simple fitting = 6.49"
[Sat Mar 10 14:25:54 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.009
[Sat Mar 10 14:25:54 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 6.49"
[Sat Mar 10 15:02:40 2012] fullrun_mos2_xmm0407030101_pi300-10000_cl_pass1_src6.ximg exists
[Sat Mar 10 15:02:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407030101_pi300-10000_cl_pass1_src6.csv
[Sat Mar 10 15:02:40 2012] fullrun_mos2_xmm0407030101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Mar 10 15:02:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407030101_pi300-10000_cl_pass1_src6.csv
[Sat Mar 10 15:02:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0407030101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0407030101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 15:02:41 2012] fullrun_mos2_xmm0407030101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Mar 10 15:02:41 2012] fullrun_mos2_xmm0407030101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Mar 10 15:02:41 2012] Fit fullrun_mos2_xmm0407030101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Mar 10 15:02:58 2012] Warning, spatial fit 6 centroid is now closest to src. 16
[Sat Mar 10 15:02:58 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 15:02:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 15:02:58 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 15:02:58 2012] Source does appear to be extended
[Sat Mar 10 15:02:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 16:13:33 2012] XMMSAS src. selection expression = ellipse(22304.317100, 37617.532400, 389.187611, 389.187611, 0.000000, X, Y)
[Sat Mar 10 16:13:33 2012] Writing source region out to fullrun_mos2_xmm0407030101_pi300-10000_pass1_cl_src4_src.reg
[Sat Mar 10 16:13:33 2012] Extracting stamp from image fullrun_mos2_xmm0407030101_pi300-10000_cl_sm2.00.img.gz, (235, 411) - (279, 455)
[Sat Mar 10 16:13:33 2012] XMMSAS bgd. selection expression = annulus(22304.317100, 37617.532400, 648.646019, 1297.292037, X, Y)
[Sat Mar 10 16:13:33 2012] Writing fullrun_mos2_xmm0407030101_pi300-10000_pass1_cl_src4.gif
[Sat Mar 10 16:17:06 2012] Mean detx,y = (-6820.50, -10879.15) 
[Sat Mar 10 16:17:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 16:17:21 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 16:17:22 2012] Setting source spectrum file to fullrun_mos2_xmm0407030101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Mar 10 16:17:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0407030101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Mar 10 16:40:56 2012] Not generating rmf since there are only 72 counts
[Sat Mar 10 16:40:56 2012] rmf not generated due to insufficient counts
[Sat Mar 10 16:43:54 2012] Updating aperture counts using extracted products
[Sat Mar 10 16:43:54 2012] Error reading totcts from fullrun_mos2_xmm0407030101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Mar 10 16:43:55 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 16:43:55 2012] Using photon index=1.80, rate=0.00261, arf fullrun_mos2_xmm0407030101_pi300-10000_pass1_cl_src4.arf
[Sat Mar 10 16:43:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 16:43:55 2012] Updating source flux to 5.9e-14
[Sat Mar 10 16:44:13 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting