[Sat May 4 20:47:53 2013] Detection parameters: Position = (296.2, 237.0) = 21 36 33.94 -62 29 46.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 398.8 +/- 26.5 Background counts = 56.5 Rate = 0.08 +/- 0.005 [Sat May 4 20:47:54 2013] Off-axis axis estimate = 4.46' [Sat May 4 20:48:09 2013] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting [Sat May 4 20:48:09 2013] Initial guess for spatial extent in simple fitting = 8.66" [Sat May 4 20:48:09 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.008 [Sat May 4 20:48:09 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 8.66" [Sat May 4 20:48:10 2013] fullrun_pn_xmm0407021401_pi300-10000_cl_pass0_src5.ximg exists [Sat May 4 20:48:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0407021401_pi300-10000_cl_pass0_src5.csv [Sat May 4 20:48:10 2013] fullrun_pn_xmm0407021401_pi300-10000_cl_pass0_src5_1.ximg exists [Sat May 4 20:48:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0407021401_pi300-10000_cl_pass0_src5.csv [Sat May 4 20:48:10 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0407021401_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0407021401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 20:48:11 2013] fullrun_pn_xmm0407021401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Sat May 4 20:48:11 2013] fullrun_pn_xmm0407021401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Sat May 4 20:48:11 2013] Fit fullrun_pn_xmm0407021401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly [Sat May 4 20:48:20 2013] Spatial fit model total counts = 295.061000, observed total counts = 293.000000 [Sat May 4 20:48:20 2013] Offset between fit and detection position for source 5 = 0.252390 pixels [Sat May 4 20:48:20 2013] 300.733200 total counts/ 204.536000 bgd. counts: snr = 6.726320 Spatial fit parameters: Offset between fit and detection position for source 5 = 0.252390 pixels Position = (296.4, 236.9) = 21 36 33.79 -62 29 46.9 Extent = 4.3 (3.6-5.3)", rotation angle = 0 Source counts = 96.2 +/- 17.3 Background counts = 204.5 Rate = 0.03 +/- 0.005 [Sat May 4 20:48:20 2013] Vigneting correction estimate = 1.000000 [Sat May 4 20:48:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 20:48:20 2013] Assessing source extent using major axis lower bound [Sat May 4 20:48:20 2013] Source does appear to be extended [Sat May 4 20:48:20 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 20:48:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat May 4 20:48:31 2013] Initial guess for spatial extent in simple fitting = 4.26" [Sat May 4 20:48:31 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.029 [Sat May 4 20:48:31 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 4.26" [Sat May 4 20:48:32 2013] fullrun_pn_xmm0407021401_pi300-10000_cl_pass1_src5.ximg exists [Sat May 4 20:48:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0407021401_pi300-10000_cl_pass1_src5.csv [Sat May 4 20:48:32 2013] fullrun_pn_xmm0407021401_pi300-10000_cl_pass1_src5_1.ximg exists [Sat May 4 20:48:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0407021401_pi300-10000_cl_pass1_src5.csv [Sat May 4 20:48:32 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0407021401_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0407021401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 20:48:32 2013] fullrun_pn_xmm0407021401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Sat May 4 20:48:32 2013] fullrun_pn_xmm0407021401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Sat May 4 20:48:32 2013] Fit fullrun_pn_xmm0407021401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly [Sat May 4 20:48:40 2013] Spatial fit model total counts = 292.609000, observed total counts = 293.000000 [Sat May 4 20:48:40 2013] Offset between fit and detection position for source 5 = 0.029097 pixels [Sat May 4 20:48:40 2013] 298.074200 total counts/ 201.910000 bgd. counts: snr = 6.767597 Spatial fit parameters: Offset between fit and detection position for source 5 = 0.029097 pixels Position = (296.5, 236.9) = 21 36 33.77 -62 29 46.9 Extent = 4.2 (3.6-5.2)", rotation angle = 0 Source counts = 96.2 +/- 17.3 Background counts = 201.9 Rate = 0.03 +/- 0.005 [Sat May 4 20:48:40 2013] Vigneting correction estimate = 1.000000 [Sat May 4 20:48:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 20:48:40 2013] Assessing source extent using major axis lower bound [Sat May 4 20:48:40 2013] Source does appear to be extended [Sat May 4 20:48:40 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 20:48:51 2013] XMMSAS src. selection expression = ellipse(25743.389000, 20561.213880, 252.513007, 252.513007, 0.000000, X, Y) [Sat May 4 20:48:51 2013] Not overwriting source region fullrun_pn_xmm0407021401_pi300-10000_pass1_cl_src5_src.reg [Sat May 4 20:48:51 2013] Extracting stamp from image fullrun_pn_xmm0407021401_pi300-10000_cl_sm2.00.img.gz, (282, 222) - (311, 251) [Sat May 4 20:48:51 2013] XMMSAS bgd. selection expression = annulus(25743.389000, 20561.213880, 420.855012, 841.710024, X, Y) && !ellipse(26746.376923, 22056.853104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26621.708200, 20885.818000, 740.676021, 740.676021, 0.000000, X, Y) && !ellipse(26584.879456, 20395.634460, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 4 20:48:51 2013] Writing fullrun_pn_xmm0407021401_pi300-10000_pass1_cl_src5.gif [Sat May 4 20:53:19 2013] Mean detx,y = (-738.72, 6824.83) [Sat May 4 20:53:20 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 4 20:53:27 2013] Binned source spectrum to 10 counts/bin [Sat May 4 20:53:28 2013] Setting source spectrum file to fullrun_pn_xmm0407021401_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Sat May 4 20:53:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0407021401_pi300-10000_pass1_cl_src5_bgd.pi.gz [Sat May 4 21:28:57 2013] Not generating rmf since there are only 96 counts [Sat May 4 21:28:57 2013] rmf not generated due to insufficient counts [Sat May 4 21:35:02 2013] Updating aperture counts using extracted products [Sat May 4 21:35:02 2013] Total counts from fullrun_pn_xmm0407021401_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 121.00 [Sat May 4 21:35:02 2013] Total counts from fullrun_pn_xmm0407021401_pi300-10000_pass1_cl_src5_bgd.pi.gz = 78.00 [Sat May 4 21:35:02 2013] Got source and background scale factors 200000.000000, 969600.000000 [Sat May 4 21:35:02 2013] User source parameters: Position = (296.5, 236.9) = 21 36 33.77 -62 29 46.9 Extent = 4.2 (3.6-5.2)", rotation angle = 0 Source aperture counts = 104.9 +/- 12.0 Background aperture counts = 16.1 Rate = 0.03 +/- 0.004 [Sat May 4 21:35:05 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 4 21:35:05 2013] Using photon index=1.80, rate=0.0304, arf fullrun_pn_xmm0407021401_pi300-10000_pass1_cl_src5.arf [Sat May 4 21:35:05 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 4 21:35:05 2013] Updating source flux to 1.5e-13 [Sat May 4 21:35:10 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting [Sat May 4 21:35:12 2013] xmm0407021401/analysis//spectral/fullrun_pn_xmm0407021401_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete