[Sat May  4 20:47:55 2013] Detection parameters:
  Position = (247.0, 460.3) = 21 37 4.53 -62 13 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.3 +/- 11.9
  Background counts = 10.7
  Rate = 0.005 +/- 0.0008

[Sat May  4 20:47:55 2013] Off-axis axis estimate = 12.31'
[Sat May  4 20:48:12 2013] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Sat May  4 20:48:12 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  4 20:48:12 2013] Initial guess for spatial extent in simple fitting = 12.58"
[Sat May  4 20:48:12 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.912
[Sat May  4 20:48:12 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 12.58"
[Sat May  4 20:48:12 2013] fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_src7.ximg exists
[Sat May  4 20:48:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_src7.csv
[Sat May  4 20:48:12 2013] fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat May  4 20:48:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_src7.csv
[Sat May  4 20:48:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 20:48:13 2013] fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat May  4 20:48:13 2013] fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat May  4 20:48:13 2013] Fit fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sat May  4 20:48:24 2013] Spatial fit model total counts = 204.997000, observed total counts = 199.000000
[Sat May  4 20:48:24 2013] Offset between fit and detection position for source 4 = 0.178600 pixels
[Sat May  4 20:48:24 2013] 206.564600 total counts/ 157.956000 bgd. counts: snr = 3.867631
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.178600 pixels
  Position = (247.1, 460.4) = 21 37 4.45 -62 13 34.5
  Extent = 4.8 (3.7-6.3)", rotation angle = 0
  Source counts = 48.6 +/- 14.4
  Background counts = 158.0
  Rate = 0.003 +/- 0.001
[Sat May  4 20:48:24 2013] Vigneting correction estimate = 1.000000
[Sat May  4 20:48:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 20:48:24 2013] Assessing source extent using major axis lower bound
[Sat May  4 20:48:24 2013] Source does appear to be extended
[Sat May  4 20:48:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 20:48:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May  4 20:48:33 2013] Initial guess for spatial extent in simple fitting = 4.76"
[Sat May  4 20:48:33 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.886
[Sat May  4 20:48:33 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 4.76"
[Sat May  4 20:48:33 2013] fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_src7.ximg exists
[Sat May  4 20:48:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_src7.csv
[Sat May  4 20:48:33 2013] fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat May  4 20:48:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_src7.csv
[Sat May  4 20:48:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 20:48:34 2013] fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat May  4 20:48:34 2013] fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat May  4 20:48:34 2013] Fit fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sat May  4 20:48:43 2013] Spatial fit model total counts = 194.563000, observed total counts = 189.000000
[Sat May  4 20:48:43 2013] Offset between fit and detection position for source 4 = 0.020900 pixels
[Sat May  4 20:48:43 2013] 193.943400 total counts/ 145.436000 bgd. counts: snr = 4.022278
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.020900 pixels
  Position = (247.2, 460.4) = 21 37 4.44 -62 13 34.5
  Extent = 4.8 (3.7-6.2)", rotation angle = 0
  Source counts = 48.5 +/- 13.9
  Background counts = 145.4
  Rate = 0.003 +/- 0.001
[Sat May  4 20:48:43 2013] Vigneting correction estimate = 1.000000
[Sat May  4 20:48:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 20:48:43 2013] Assessing source extent using major axis lower bound
[Sat May  4 20:48:43 2013] Source does appear to be extended
[Sat May  4 20:48:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 21:34:48 2013] XMMSAS src. selection expression = ellipse(21454.888880, 40004.518000, 289.920608, 289.920608, 0.000000, X, Y)
[Sat May  4 21:34:48 2013] Not overwriting source region fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src4_src.reg
[Sat May  4 21:34:48 2013] Extracting stamp from image fullrun_mos2_xmm0407021401_pi300-10000_cl_sm2.00.img.gz, (231, 444) - (264, 477)
[Sat May  4 21:34:48 2013] XMMSAS bgd. selection expression = annulus(21454.888880, 40004.518000, 483.201014, 966.402028, X, Y)
[Sat May  4 21:34:48 2013] Writing fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src4.gif
[Sat May  4 21:34:48 2013] ../../xmm0407021401/products/events/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0407021401/products/events/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sat May  4 21:34:48 2013] Mean detx,y = (7063.44, 11943.96) 
[Sat May  4 21:34:48 2013] ../../xmm0407021401/products/images/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src4_src.img and ../../xmm0407021401/products/images/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Sat May  4 21:34:48 2013] ../../xmm0407021401/products/spectra/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0407021401/products/spectra/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sat May  4 21:34:48 2013] Setting source spectrum file to fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat May  4 21:34:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat May  4 21:34:48 2013] ../../xmm0407021401/products/lightcurves/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0407021401/products/lightcurves/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sat May  4 21:34:49 2013] Not generating rmf since there are only 48 counts
[Sat May  4 21:34:49 2013] rmf not generated due to insufficient counts
[Sat May  4 21:34:49 2013] fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Sat May  4 21:35:06 2013] Updating aperture counts using extracted products
[Sat May  4 21:35:06 2013] Total counts from fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 70.00
[Sat May  4 21:35:06 2013] Total counts from fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src4_bgd.pi.gz = 137.00
[Sat May  4 21:35:06 2013] Got source and background scale factors 260800.000000, 2073744.000000
[Sat May  4 21:35:06 2013] User source parameters:
  Position = (247.2, 460.4) = 21 37 4.44 -62 13 34.5
  Extent = 4.8 (3.7-6.2)", rotation angle = 0
  Source aperture counts = 52.8 +/- 9.4
  Background aperture counts = 17.2
  Rate = 0.004 +/- 0.0006

[Sat May  4 21:35:07 2013] Calculating source flux in energy range 0.30-8.00
[Sat May  4 21:35:07 2013] Using photon index=1.80, rate=0.00332, arf fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src4.arf
[Sat May  4 21:35:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  4 21:35:07 2013] Updating source flux to 1.3e-13
[Sat May  4 21:35:09 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May  4 21:35:10 2013] xmm0407021401/analysis//spectral/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete