[Sat May  4 20:47:55 2013] Detection parameters:
  Position = (399.0, 232.9) = 21 35 29.39 -62 30 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4893.6 +/- 82.7
  Background counts = 15.7
  Rate = 0.6 +/- 0.01

[Sat May  4 20:47:55 2013] Off-axis axis estimate = 8.70'
[Sat May  4 20:48:12 2013] Using EEF radius (= 10.78 ")to estimate initial spatial extent for simple fitting
[Sat May  4 20:48:12 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  4 20:48:12 2013] Initial guess for spatial extent in simple fitting = 10.78"
[Sat May  4 20:48:12 2013] source mask rpix=2.5, npix_max = 35, mask sum = 27, frac = 0.761
[Sat May  4 20:48:12 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.78"
[Sat May  4 20:48:12 2013] fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_src2.ximg exists
[Sat May  4 20:48:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_src2.csv
[Sat May  4 20:48:12 2013] fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat May  4 20:48:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_src2.csv
[Sat May  4 20:48:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 20:48:13 2013] fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat May  4 20:48:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat May  4 20:48:13 2013] fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat May  4 20:48:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat May  4 20:48:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0407021401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 20:48:24 2013] Spatial fit model total counts = 5102.030000, observed total counts = 4485.000000
[Sat May  4 20:48:24 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  4 20:48:24 2013] Spatial fit model total counts = 3061.000000, observed total counts = 3402.000000
[Sat May  4 20:48:24 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  4 20:48:24 2013] Vigneting correction estimate = 1.000000
[Sat May  4 20:48:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 20:48:24 2013] Assessing source extent using major
[Sat May  4 20:48:24 2013] Source does appear to be extended
[Sat May  4 20:48:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 20:48:33 2013] Using EEF radius (= 10.78 ")to estimate initial spatial extent for simple fitting
[Sat May  4 20:48:33 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  4 20:48:33 2013] Initial guess for spatial extent in simple fitting = 10.78"
[Sat May  4 20:48:33 2013] source mask rpix=2.5, npix_max = 35, mask sum = 27, frac = 0.761
[Sat May  4 20:48:33 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 10.78"
[Sat May  4 20:48:33 2013] fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_src2.ximg exists
[Sat May  4 20:48:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_src2.csv
[Sat May  4 20:48:33 2013] fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat May  4 20:48:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_src2.csv
[Sat May  4 20:48:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 20:48:34 2013] fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat May  4 20:48:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat May  4 20:48:34 2013] fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat May  4 20:48:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat May  4 20:48:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0407021401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 20:48:43 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.851913 pixels away
[Sat May  4 20:48:43 2013] Spatial fit model total counts = 1602.600000, observed total counts = 942.000000
[Sat May  4 20:48:43 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  4 20:48:43 2013] Spatial fit model total counts = 2903.290000, observed total counts = 3402.000000
[Sat May  4 20:48:43 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  4 20:48:43 2013] Vigneting correction estimate = 1.000000
[Sat May  4 20:48:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 20:48:43 2013] Assessing source extent using major
[Sat May  4 20:48:43 2013] Source does appear to be extended
[Sat May  4 20:48:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 21:34:47 2013] Counts = 4893.594727, rescaling region sizes by 2.000000
[Sat May  4 21:34:47 2013] XMMSAS src. selection expression = ellipse(34661.290070, 20212.429474, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat May  4 21:34:47 2013] Not overwriting source region fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src1_src.reg
[Sat May  4 21:34:47 2013] Extracting stamp from image fullrun_mos2_xmm0407021401_pi300-10000_cl_sm2.00.img.gz, (324, 158) - (474, 308)
[Sat May  4 21:34:47 2013] XMMSAS bgd. selection expression = annulus(34661.290070, 20212.429474, 4350.000000, 8700.000000, X, Y) && !ellipse(27253.325562, 27511.537781, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(36252.836761, 29723.187805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25716.345032, 20407.341812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38690.532844, 28565.330836, 467.071214, 311.339236, 84.164918, X, Y) && !ellipse(27772.609467, 26214.168335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27894.929321, 26828.621765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40203.148651, 25933.152069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33887.285309, 19614.980179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28443.997345, 28042.668427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34812.438232, 19505.903610, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  4 21:34:47 2013] Writing fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src1.gif
[Sat May  4 21:34:48 2013] ../../xmm0407021401/products/events/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0407021401/products/events/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat May  4 21:34:48 2013] Mean detx,y = (-8075.27, -6423.91) 
[Sat May  4 21:34:48 2013] ../../xmm0407021401/products/images/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src1_src.img and ../../xmm0407021401/products/images/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat May  4 21:34:48 2013] ../../xmm0407021401/products/spectra/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0407021401/products/spectra/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat May  4 21:34:48 2013] Setting source spectrum file to fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May  4 21:34:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May  4 21:34:48 2013] ../../xmm0407021401/products/lightcurves/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0407021401/products/lightcurves/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat May  4 21:34:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  4 21:34:49 2013] rmf not generated due to insufficient counts
[Sat May  4 21:34:49 2013] fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Sat May  4 21:35:05 2013] Updating aperture counts using extracted products
[Sat May  4 21:35:05 2013] Total counts from fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 5026.00
[Sat May  4 21:35:05 2013] Total counts from fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 8020.00
[Sat May  4 21:35:06 2013] Got source and background scale factors 4872394.000000, 114773217.000000
[Sat May  4 21:35:06 2013] User source parameters:
  Position = (399.0, 232.9) = 21 35 29.39 -62 30 5.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 4685.5 +/- 71.9
  Background aperture counts = 340.5
  Rate = 0.3 +/- 0.005

[Sat May  4 21:35:06 2013] Updating counts from extracted products
[Sat May  4 21:35:06 2013] Set source signif. to 4685.53/18.45 = 253.93
[Sat May  4 21:35:07 2013] Calculating source flux in energy range 0.30-8.00
[Sat May  4 21:35:07 2013] Using photon index=1.80, rate=0.32, arf fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src1.arf
[Sat May  4 21:35:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  4 21:35:07 2013] Updating source flux to 5.9e-12
[Sat May  4 21:35:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May  4 21:35:10 2013] xmm0407021401/analysis//spectral/fullrun_mos2_xmm0407021401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete