[Wed Mar  7 10:21:46 2012] Detection parameters:
  Position = (406.0, 222.2) = 21 35 29.49 -62 30 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6413.9 +/- 98.3
  Background counts = 136.9
  Rate = 2 +/- 0.04

[Wed Mar  7 10:21:47 2012] Off-axis axis estimate = 9.56'
[Wed Mar  7 10:25:25 2012] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 10:25:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar  7 10:25:25 2012] Initial guess for spatial extent in simple fitting = 11.21"
[Wed Mar  7 10:25:25 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.951
[Wed Mar  7 10:25:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.21"
[Wed Mar  7 11:05:13 2012] fullrun_pn_xmm0407021001_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar  7 11:05:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0407021001_pi300-10000_cl_pass0_src1.csv
[Wed Mar  7 11:05:13 2012] fullrun_pn_xmm0407021001_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar  7 11:05:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0407021001_pi300-10000_cl_pass0_src1.csv
[Wed Mar  7 11:05:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0407021001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0407021001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 11:05:13 2012] fullrun_pn_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar  7 11:05:13 2012] fullrun_pn_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar  7 11:05:13 2012] Fit fullrun_pn_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar  7 11:34:20 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.432269 pixels away
[Wed Mar  7 11:34:20 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 11:34:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 11:34:20 2012] Assessing source extent using major
[Wed Mar  7 11:34:20 2012] Source does appear to be extended
[Wed Mar  7 11:34:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 11:34:32 2012] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 11:34:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar  7 11:34:32 2012] Initial guess for spatial extent in simple fitting = 11.21"
[Wed Mar  7 11:34:32 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.951
[Wed Mar  7 11:34:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.21"
[Wed Mar  7 11:48:22 2012] fullrun_pn_xmm0407021001_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar  7 11:48:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0407021001_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 11:48:22 2012] fullrun_pn_xmm0407021001_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar  7 11:48:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0407021001_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 11:48:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0407021001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0407021001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 11:48:22 2012] fullrun_pn_xmm0407021001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar  7 11:48:22 2012] fullrun_pn_xmm0407021001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar  7 11:48:22 2012] Fit fullrun_pn_xmm0407021001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar  7 11:59:20 2012] Spatial fit model total counts = 4907.300000, observed total counts = 4832.000000
[Wed Mar  7 11:59:20 2012] Offset between fit and detection position for source 1 = 0.192170 pixels
[Wed Mar  7 11:59:20 2012] 4918.300000 total counts/ 2109.460000 bgd. counts: snr = 61.156321
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.192170 pixels
  Position = (406.0, 222.4) = 21 35 29.52 -62 30 7.6
  Extent = 6.4 (6.2-6.6)", rotation angle = 0
  Source counts = 2808.8 +/- 70.1
  Background counts = 2109.5
  Rate = 1 +/- 0.03
[Wed Mar  7 11:59:20 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 11:59:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 11:59:20 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 11:59:20 2012] Source does appear to be extended
[Wed Mar  7 11:59:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 11:59:30 2012] Counts = 2808.840000, rescaling region sizes by 2.000000
[Wed Mar  7 11:59:30 2012] XMMSAS src. selection expression = ellipse(35272.098400, 19297.870780, 765.958822, 765.958822, 0.000000, X, Y)
[Wed Mar  7 11:59:30 2012] Writing source region out to fullrun_pn_xmm0407021001_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar  7 11:59:30 2012] Extracting stamp from image fullrun_pn_xmm0407021001_pi300-10000_cl_sm2.00.img.gz, (362, 178) - (450, 266)
[Wed Mar  7 11:59:30 2012] XMMSAS bgd. selection expression = annulus(35272.098400, 19297.870780, 2553.196073, 5106.392147, X, Y)
[Wed Mar  7 11:59:30 2012] Writing fullrun_pn_xmm0407021001_pi300-10000_pass1_cl_src1.gif
[Wed Mar  7 11:59:44 2012] Mean detx,y = (10395.06, 1636.66) 
[Wed Mar  7 11:59:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 12:01:54 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 12:01:55 2012] Setting source spectrum file to fullrun_pn_xmm0407021001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar  7 12:01:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0407021001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar  7 13:36:08 2012] Updating aperture counts using extracted products
[Wed Mar  7 13:36:08 2012] Error reading totcts from fullrun_pn_xmm0407021001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar  7 13:36:08 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 13:36:08 2012] Using photon index=1.80, rate=1.23, arf fullrun_pn_xmm0407021001_pi300-10000_pass1_cl_src1.arf
[Wed Mar  7 13:36:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 13:36:09 2012] Updating source flux to 4.9e-12
[Wed Mar  7 13:37:59 2012] Reading fit data from xmm0407021001/analysis//spectral/fullrun_pn_xmm0407021001_pi300-10000_pass1_cl_src1_pl.csv
[Wed Mar  7 13:37:59 2012] Spectral fit parameter nH value = 3.83316e+20
[Wed Mar  7 13:37:59 2012] Spectral fit parameter PhoIndex value = 2.69271
[Wed Mar  7 13:37:59 2012] Failed to get F(0.3-8.0) from xmm0407021001/analysis//spectral/fullrun_pn_xmm0407021001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Mar  7 13:37:59 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 13:37:59 2012] Using Nh = 3.8e+20, photon index=2.69, rate=1.23, arf fullrun_pn_xmm0407021001_pi300-10000_pass1_cl_src1.arf
[Wed Mar  7 13:37:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 13:37:59 2012] Updating source flux to 3.3e-12