[Wed Mar  7 10:22:30 2012] Detection parameters:
  Position = (207.0, 294.9) = 21 37 34.35 -62 24 54.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.6 +/- 11.8
  Background counts = 31.5
  Rate = 0.01 +/- 0.002

[Wed Mar  7 10:22:30 2012] Off-axis axis estimate = 6.64'
[Wed Mar  7 11:17:04 2012] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 11:17:04 2012] Initial guess for spatial extent in simple fitting = 9.75"
[Wed Mar  7 11:17:04 2012] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.832
[Wed Mar  7 11:17:04 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.75"
[Wed Mar  7 11:34:15 2012] fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_src4.ximg exists
[Wed Mar  7 11:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_src4.csv
[Wed Mar  7 11:34:15 2012] fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Mar  7 11:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_src4.csv
[Wed Mar  7 11:34:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 11:34:15 2012] fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Mar  7 11:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Mar  7 11:34:15 2012] fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Mar  7 11:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Mar  7 11:34:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 11:34:25 2012] Spatial fit model total counts = 250.910000, observed total counts = 221.000000
[Wed Mar  7 11:34:25 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Mar  7 11:34:25 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 11:34:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 11:34:25 2012] Assessing source extent using major
[Wed Mar  7 11:34:25 2012] Source does appear to be extended
[Wed Mar  7 11:34:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 11:34:25 2012] Deleting source due to low Poisson probability 0.9