[Wed Mar  7 10:22:30 2012] Detection parameters:
  Position = (320.9, 306.9) = 21 36 23.02 -62 24 1.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 16617.9 +/- 152.6
  Background counts = 44.9
  Rate = 3 +/- 0.02

[Wed Mar  7 10:22:30 2012] Off-axis axis estimate = 1.74'
[Wed Mar  7 11:17:04 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 11:17:04 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Mar  7 11:17:04 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Wed Mar  7 11:17:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Wed Mar  7 11:34:15 2012] fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar  7 11:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_src1.csv
[Wed Mar  7 11:34:15 2012] fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar  7 11:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_src1.csv
[Wed Mar  7 11:34:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 11:34:15 2012] fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar  7 11:34:15 2012] fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar  7 11:34:15 2012] Fit fullrun_mos2_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar  7 11:34:25 2012] Spatial fit model total counts = 12055.900000, observed total counts = 11742.000000
[Wed Mar  7 11:34:25 2012] Offset between fit and detection position for source 1 = 0.189300 pixels
[Wed Mar  7 11:34:25 2012] 12001.720000 total counts/ 3025.830000 bgd. counts: snr = 163.175615
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.189300 pixels
  Position = (320.7, 306.7) = 21 36 23.11 -62 24 1.5
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 8975.9 +/- 109.6
  Background counts = 3025.8
  Rate = 2 +/- 0.02
[Wed Mar  7 11:34:25 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 11:34:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 11:34:25 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 11:34:25 2012] Source does appear to be extended
[Wed Mar  7 11:34:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 11:53:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar  7 11:53:31 2012] Initial guess for spatial extent in simple fitting = 5.40"
[Wed Mar  7 11:53:31 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.743
[Wed Mar  7 11:53:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.40"
[Wed Mar  7 11:59:16 2012] fullrun_mos2_xmm0407021001_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar  7 11:59:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021001_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 11:59:16 2012] fullrun_mos2_xmm0407021001_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar  7 11:59:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021001_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 11:59:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0407021001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0407021001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 11:59:16 2012] fullrun_mos2_xmm0407021001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar  7 11:59:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Mar  7 11:59:16 2012] fullrun_mos2_xmm0407021001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar  7 11:59:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0407021001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Mar  7 11:59:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0407021001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0407021001_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 11:59:23 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Wed Mar  7 11:59:23 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 11:59:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 11:59:23 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 11:59:23 2012] Source does appear to be extended
[Wed Mar  7 11:59:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 13:25:17 2012] Counts = 8975.890000, rescaling region sizes by 2.000000
[Wed Mar  7 13:25:17 2012] XMMSAS src. selection expression = ellipse(27855.068400, 26638.254000, 647.620819, 647.620819, 0.000000, X, Y)
[Wed Mar  7 13:25:17 2012] Writing source region out to fullrun_mos2_xmm0407021001_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar  7 13:25:17 2012] Extracting stamp from image fullrun_mos2_xmm0407021001_pi300-10000_cl_sm2.00.img.gz, (284, 270) - (358, 344)
[Wed Mar  7 13:25:17 2012] XMMSAS bgd. selection expression = annulus(27855.068400, 26638.254000, 2158.736062, 4317.472124, X, Y)
[Wed Mar  7 13:25:17 2012] Writing fullrun_mos2_xmm0407021001_pi300-10000_pass1_cl_src1.gif
[Wed Mar  7 13:25:21 2012] Mean detx,y = (27.53, 76.52) 
[Wed Mar  7 13:25:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 13:26:47 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 13:26:47 2012] Setting source spectrum file to fullrun_mos2_xmm0407021001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar  7 13:26:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0407021001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar  7 13:36:09 2012] Updating aperture counts using extracted products
[Wed Mar  7 13:36:09 2012] Error reading totcts from fullrun_mos2_xmm0407021001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar  7 13:36:09 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 13:36:09 2012] Using photon index=1.80, rate=1.8, arf fullrun_mos2_xmm0407021001_pi300-10000_pass1_cl_src1.arf
[Wed Mar  7 13:36:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 13:36:09 2012] Updating source flux to 1.9e-11
[Wed Mar  7 13:36:49 2012] Reading fit data from xmm0407021001/analysis//spectral/fullrun_mos2_xmm0407021001_pi300-10000_pass1_cl_src1_pl.csv
[Wed Mar  7 13:36:49 2012] Spectral fit parameter nH value = 7.93966e+19
[Wed Mar  7 13:36:49 2012] Spectral fit parameter PhoIndex value = 2.06246
[Wed Mar  7 13:36:49 2012] Failed to get F(0.3-8.0) from xmm0407021001/analysis//spectral/fullrun_mos2_xmm0407021001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Mar  7 13:36:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 13:36:49 2012] Using Nh = 7.9e+19, photon index=2.06, rate=1.8, arf fullrun_mos2_xmm0407021001_pi300-10000_pass1_cl_src1.arf
[Wed Mar  7 13:36:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 13:36:49 2012] Updating source flux to 1.7e-11