[Wed Mar  7 10:22:12 2012] Detection parameters:
  Position = (168.2, 427.8) = 21 37 58.22 -62 15 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.5 +/- 13.7
  Background counts = 28.0
  Rate = 0.01 +/- 0.002

[Wed Mar  7 10:22:12 2012] Off-axis axis estimate = 13.31'
[Wed Mar  7 11:05:13 2012] Using EEF radius (= 13.08 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 11:05:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar  7 11:05:13 2012] Initial guess for spatial extent in simple fitting = 13.08"
[Wed Mar  7 11:05:13 2012] source mask rpix=3.0, npix_max = 49, mask sum = 48, frac = 0.975
[Wed Mar  7 11:05:13 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.08"
[Wed Mar  7 11:17:04 2012] fullrun_mos1_xmm0407021001_pi300-10000_cl_pass0_src4.ximg exists
[Wed Mar  7 11:17:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0407021001_pi300-10000_cl_pass0_src4.csv
[Wed Mar  7 11:17:04 2012] fullrun_mos1_xmm0407021001_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Mar  7 11:17:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0407021001_pi300-10000_cl_pass0_src4.csv
[Wed Mar  7 11:17:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0407021001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0407021001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 11:17:04 2012] fullrun_mos1_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Mar  7 11:17:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Mar  7 11:17:04 2012] fullrun_mos1_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Mar  7 11:17:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Mar  7 11:17:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0407021001_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 11:34:23 2012] Spatial fit model total counts = 239.317000, observed total counts = 207.000000
[Wed Mar  7 11:34:23 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Mar  7 11:34:23 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 11:34:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 11:34:23 2012] Assessing source extent using major
[Wed Mar  7 11:34:23 2012] Source does appear to be extended
[Wed Mar  7 11:34:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 11:34:23 2012] Deleting source due to low Poisson probability 0.9