[Mon May 28 10:24:47 2012] Detection parameters:
  Position = (305.3, 425.0) = 19 52 8.89 29 36 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 893.5 +/- 35.7
  Background counts = 26.7
  Rate = 0.04 +/- 0.001

[Mon May 28 10:24:48 2012] Off-axis axis estimate = 9.19'
[Mon May 28 10:54:18 2012] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Mon May 28 10:54:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 10:54:18 2012] Initial guess for spatial extent in simple fitting = 11.02"
[Mon May 28 10:54:18 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.977
[Mon May 28 10:54:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.02"
[Mon May 28 11:20:22 2012] fullrun_mos2_xmm0406960101_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 28 11:20:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406960101_pi300-10000_cl_pass0_src1.csv
[Mon May 28 11:20:22 2012] fullrun_mos2_xmm0406960101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 28 11:20:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406960101_pi300-10000_cl_pass0_src1.csv
[Mon May 28 11:20:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0406960101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0406960101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 11:20:22 2012] fullrun_mos2_xmm0406960101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 28 11:20:22 2012] fullrun_mos2_xmm0406960101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 28 11:20:22 2012] Fit fullrun_mos2_xmm0406960101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 28 11:20:29 2012] Spatial fit model total counts = 1243.730000, observed total counts = 1199.000000
[Mon May 28 11:20:29 2012] Offset between fit and detection position for source 7 = 0.381807 pixels
[Mon May 28 11:20:29 2012] 1247.357000 total counts/ 574.560000 bgd. counts: snr = 28.068316
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.381807 pixels
  Position = (304.9, 425.0) = 19 52 9.02 29 36 18.8
  Extent = 5.8 (5.4-6.2)", rotation angle = 0
  Source counts = 672.8 +/- 35.3
  Background counts = 574.6
  Rate = 0.01 +/- 0.0007
[Mon May 28 11:20:29 2012] Vigneting correction estimate = 1.000000
[Mon May 28 11:20:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 11:20:29 2012] Assessing source extent using major axis lower bound
[Mon May 28 11:20:29 2012] Source does appear to be extended
[Mon May 28 11:20:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 11:39:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 11:39:50 2012] Initial guess for spatial extent in simple fitting = 5.78"
[Mon May 28 11:39:50 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.195
[Mon May 28 11:39:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.78"
[Mon May 28 12:03:11 2012] fullrun_mos2_xmm0406960101_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 28 12:03:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406960101_pi300-10000_cl_pass1_src1.csv
[Mon May 28 12:03:11 2012] fullrun_mos2_xmm0406960101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 28 12:03:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406960101_pi300-10000_cl_pass1_src1.csv
[Mon May 28 12:03:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0406960101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0406960101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 12:03:11 2012] fullrun_mos2_xmm0406960101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 28 12:03:11 2012] fullrun_mos2_xmm0406960101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 28 12:03:11 2012] Fit fullrun_mos2_xmm0406960101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 28 12:03:18 2012] Spatial fit model total counts = 1026.170000, observed total counts = 992.000000
[Mon May 28 12:03:18 2012] Offset between fit and detection position for source 7 = 0.008395 pixels
[Mon May 28 12:03:18 2012] 1025.800000 total counts/ 367.453000 bgd. counts: snr = 34.344244
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.008395 pixels
  Position = (304.9, 425.0) = 19 52 9.01 29 36 18.8
  Extent = 5.7 (5.3-6.1)", rotation angle = 0
  Source counts = 658.3 +/- 32.0
  Background counts = 367.5
  Rate = 0.01 +/- 0.0007
[Mon May 28 12:03:18 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:03:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:03:18 2012] Assessing source extent using major axis lower bound
[Mon May 28 12:03:18 2012] Source does appear to be extended
[Mon May 28 12:03:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 12:42:23 2012] XMMSAS src. selection expression = ellipse(26480.371080, 36930.397400, 341.347210, 341.347210, 0.000000, X, Y)
[Mon May 28 12:42:23 2012] Writing source region out to fullrun_mos2_xmm0406960101_pi300-10000_pass1_cl_src7_src.reg
[Mon May 28 12:42:23 2012] Extracting stamp from image fullrun_mos2_xmm0406960101_pi300-10000_cl_sm2.00.img.gz, (285, 405) - (325, 445)
[Mon May 28 12:42:23 2012] XMMSAS bgd. selection expression = annulus(26480.371080, 36930.397400, 568.912016, 1137.824033, X, Y) && !ellipse(24528.787598, 35995.699829, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 12:42:23 2012] Writing fullrun_mos2_xmm0406960101_pi300-10000_pass1_cl_src7.gif
[Mon May 28 12:42:25 2012] Mean detx,y = (-450.03, -12532.65) 
[Mon May 28 12:42:26 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 12:42:34 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 12:42:34 2012] Setting source spectrum file to fullrun_mos2_xmm0406960101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon May 28 12:42:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0406960101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon May 28 13:03:36 2012] Updating aperture counts using extracted products
[Mon May 28 13:03:36 2012] Error reading totcts from fullrun_mos2_xmm0406960101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon May 28 13:03:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 13:03:37 2012] Using photon index=1.80, rate=0.0135, arf fullrun_mos2_xmm0406960101_pi300-10000_pass1_cl_src7.arf
[Mon May 28 13:03:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 13:03:37 2012] Updating source flux to 3.5e-13
[Mon May 28 13:04:22 2012] Reading fit data from xmm0406960101/analysis//spectral/fullrun_mos2_xmm0406960101_pi300-10000_pass1_cl_src7_pl.csv
[Mon May 28 13:04:22 2012] Spectral fit parameter nH value = 3.39091e+21
[Mon May 28 13:04:22 2012] Spectral fit parameter PhoIndex value = 2.16867
[Mon May 28 13:04:22 2012] Failed to get F(0.3-8.0) from xmm0406960101/analysis//spectral/fullrun_mos2_xmm0406960101_pi300-10000_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Mon May 28 13:04:22 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 13:04:22 2012] Using Nh = 3.4e+21, photon index=2.17, rate=0.0135, arf fullrun_mos2_xmm0406960101_pi300-10000_pass1_cl_src7.arf
[Mon May 28 13:04:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 13:04:22 2012] Updating source flux to 3.8e-13