[Tue Jul 24 00:20:26 2012] Detection parameters:
  Position = (264.7, 300.1) = 5 36 15.13 -69 15 59.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 293.9 +/- 36.9
  Background counts = 478.3
  Rate = 0.004 +/- 0.0005

[Tue Jul 24 00:20:27 2012] Off-axis axis estimate = 2.45'
[Tue Jul 24 00:29:51 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 00:29:51 2012] Initial guess for spatial extent in simple fitting = 7.65"
[Tue Jul 24 00:29:51 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.979
[Tue Jul 24 00:29:51 2012] Giving source the simple spatial ID 93 for pass 0, mean size = 7.65"
[Tue Jul 24 06:25:24 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src93.ximg exists
[Tue Jul 24 06:25:24 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src93_1.ximg exists
[Tue Jul 24 06:25:24 2012] Fit fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src93 appears to have run properly
[Tue Jul 24 06:25:26 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Tue Jul 24 06:25:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src93.csv
[Tue Jul 24 06:25:26 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Tue Jul 24 06:25:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src93.csv
[Tue Jul 24 06:25:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src93_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 13:37:38 2012] Spatial fit model total counts = 4942.410000, observed total counts = 4538.000000
[Tue Jul 24 13:37:38 2012] Offset between fit and detection position for source 98 = 0.418919 pixels
[Tue Jul 24 13:37:38 2012] 5027.600000 total counts/ 4555.710000 bgd. counts: snr = 6.991377
Spatial fit parameters:
  Offset between fit and detection position for source 98 = 0.418919 pixels
  Position = (264.9, 299.8) = 5 36 14.97 -69 16 5.9
  Extent = 13.2" x 13.1", rotation angle = 262
  Source counts = 471.9 +/- 70.9
  Background counts = 4555.7
  Rate = 0.005 +/- 0.0008
[Tue Jul 24 13:37:38 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 13:37:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 13:37:38 2012] Assessing source extent using major
[Tue Jul 24 13:37:38 2012] Source does appear to be extended
[Tue Jul 24 13:37:38 2012] Computing asymmetry using major and minor axis, asym = 1.01
[Tue Jul 24 13:37:38 2012] Source is confused with source 91
[Tue Jul 24 13:38:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 24 13:38:36 2012] Initial guess for spatial extent in simple fitting = 13.14"
[Tue Jul 24 13:38:36 2012] source mask rpix=3.0, npix_max = 49, mask sum = 48, frac = 0.969
[Tue Jul 24 13:38:36 2012] Giving source the simple spatial ID 83 for pass 1, mean size = 13.14"
[Tue Jul 24 19:25:44 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src83.ximg exists
[Tue Jul 24 19:25:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src83.csv
[Tue Jul 24 19:25:44 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src83_1.ximg exists
[Tue Jul 24 19:25:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src83.csv
[Tue Jul 24 19:25:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 19:25:47 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Tue Jul 24 19:25:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src83.csv
[Tue Jul 24 19:25:47 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Tue Jul 24 19:25:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src83.csv
[Tue Jul 24 19:25:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 03:29:55 2012] Spatial fit model total counts = 6124.150000, observed total counts = 5388.000000
[Wed Jul 25 03:29:55 2012] Poor agreement between spatial fit and data for source 98
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 25 03:29:56 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 03:29:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 03:29:56 2012] Assessing source extent using major
[Wed Jul 25 03:29:56 2012] Source does appear to be extended
[Wed Jul 25 03:29:56 2012] Computing asymmetry using major and minor axis, asym = 1.01
[Wed Jul 25 03:30:54 2012] XMMSAS src. selection expression = ellipse(22997.310300, 26031.972801, 791.112023, 785.162697, 261.818915, X, Y)
[Wed Jul 25 03:30:54 2012] Writing source region out to fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src98_src.reg
[Wed Jul 25 03:30:54 2012] Extracting stamp from image fullrun_pn_xmm0406840301_pi300-10000_cl_sm2.00.img.gz, (219, 254) - (310, 345)
[Wed Jul 25 03:30:54 2012] XMMSAS bgd. selection expression = annulus(22997.310300, 26031.972801, 1318.520038, 2637.040076, X, Y) && !ellipse(22752.360000, 29548.236000, 1405.720040, 1405.720040, 0.000000, X, Y) && !ellipse(26255.676600, 23570.382600, 1183.296034, 806.264023, 280.470000, X, Y) && !ellipse(25801.619263, 24316.950775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22813.715668, 26770.312012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23603.268280, 26644.691956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22226.909058, 26357.784180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25288.442000, 26043.751000, 1054.816030, 474.300814, 216.356712, X, Y) && !ellipse(19959.548553, 24574.929352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19707.008804, 23689.862061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24420.573914, 23452.693604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23836.098000, 23071.040000, 1220.640035, 1220.640035, 0.000000, X, Y) && !ellipse(23343.911743, 22763.570129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20279.836685, 22679.418976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19844.929611, 22787.985779, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 03:30:54 2012] Writing fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src98.gif
[Wed Jul 25 06:27:45 2012] Mean detx,y = (-2900.16, 3806.21) 
[Wed Jul 25 06:27:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 06:28:13 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 06:28:14 2012] Setting source spectrum file to fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Wed Jul 25 06:28:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src98_bgd.pi.gz
[Wed Jul 25 18:52:26 2012] Updating aperture counts using extracted products
[Wed Jul 25 18:52:26 2012] Error reading totcts from fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Wed Jul 25 18:52:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:52:30 2012] Using photon index=1.80, rate=0.0051, arf fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src98.arf
[Wed Jul 25 18:52:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:52:30 2012] Updating source flux to 1.5e-14
[Wed Jul 25 19:08:05 2012] Flag p found in src. 98 procflags, skipping spectral fitting
[Wed Jul 25 19:08:05 2012] Flag c found in src. 98 procflags, skipping spectral fitting