[Tue Jul 24 00:20:26 2012] Detection parameters:
  Position = (307.2, 332.8) = 5 35 40.33 -69 13 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 473.4 +/- 34.7
  Background counts = 441.9
  Rate = 0.007 +/- 0.0005

[Tue Jul 24 00:20:27 2012] Off-axis axis estimate = 2.57'
[Tue Jul 24 00:29:51 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 00:29:51 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Tue Jul 24 00:29:51 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.725
[Tue Jul 24 00:29:51 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 7.72"
[Tue Jul 24 06:25:23 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src81.ximg exists
[Tue Jul 24 06:25:23 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src81_1.ximg exists
[Tue Jul 24 06:25:23 2012] Fit fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src81 appears to have run properly
[Tue Jul 24 06:25:26 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Tue Jul 24 06:25:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src81.csv
[Tue Jul 24 06:25:26 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Tue Jul 24 06:25:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src81.csv
[Tue Jul 24 06:25:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 13:37:37 2012] Source 85 is offset by 6.470540 and 3.565710 pixels which is larger than
2 X fitted extent = 1.798533 x 1.798533, not incorporating fit results
[Tue Jul 24 13:37:38 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 13:37:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 13:37:38 2012] Assessing source extent using major
[Tue Jul 24 13:37:38 2012] Source does appear to be extended
[Tue Jul 24 13:37:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 13:38:36 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 13:38:36 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Tue Jul 24 13:38:36 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.725
[Tue Jul 24 13:38:36 2012] Giving source the simple spatial ID 72 for pass 1, mean size = 7.72"
[Tue Jul 24 19:25:44 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src72.ximg exists
[Tue Jul 24 19:25:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src72.csv
[Tue Jul 24 19:25:44 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src72_1.ximg exists
[Tue Jul 24 19:25:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src72.csv
[Tue Jul 24 19:25:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 19:25:47 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Tue Jul 24 19:25:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src72.csv
[Tue Jul 24 19:25:47 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Tue Jul 24 19:25:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src72.csv
[Tue Jul 24 19:25:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 03:29:55 2012] Source 85 is offset by 6.430287 and 2.088307 pixels which is larger than
2 X fitted extent = 1.280731 x 1.280731, not incorporating fit results
[Wed Jul 25 03:29:55 2012] Source 85 is offset by -3.231897 and -1.345095 pixels which is larger than
2 X fitted extent = 1.144846 x 1.144846, not incorporating fit results
[Wed Jul 25 03:29:56 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 03:29:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 03:29:56 2012] Assessing source extent using major
[Wed Jul 25 03:29:56 2012] Source does appear to be extended
[Wed Jul 25 03:29:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 03:30:54 2012] XMMSAS src. selection expression = ellipse(26676.546997, 28908.794739, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 03:30:54 2012] Writing source region out to fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src85_src.reg
[Wed Jul 25 03:30:54 2012] Extracting stamp from image fullrun_pn_xmm0406840301_pi300-10000_cl_sm2.00.img.gz, (270, 295) - (345, 370)
[Wed Jul 25 03:30:54 2012] XMMSAS bgd. selection expression = annulus(26676.546997, 28908.794739, 1087.500000, 2175.000000, X, Y) && !ellipse(27995.092400, 25909.541200, 1514.085644, 1514.085644, 0.000000, X, Y) && !ellipse(27410.259033, 25812.714630, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25980.464691, 30224.462646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26227.398346, 31599.159821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27730.245200, 31319.122000, 1390.024040, 1390.024040, 0.000000, X, Y) && !ellipse(24583.135480, 31101.368800, 623.307218, 623.307218, 0.000000, X, Y) && !ellipse(27923.682000, 31127.660000, 1421.528041, 1421.528041, 0.000000, X, Y) && !ellipse(26448.712000, 31083.614000, 345.498410, 345.498410, 0.000000, X, Y) && !ellipse(26808.292206, 30579.647156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24286.156000, 30328.860000, 1335.672038, 1335.672038, 0.000000, X, Y) && !ellipse(27001.076538, 29569.591705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28437.266846, 27096.060211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29198.992096, 26485.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29333.782623, 25873.445770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25288.442000, 26043.751000, 1054.816030, 474.300814, 216.356712, X, Y)
[Wed Jul 25 03:30:54 2012] Writing fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src85.gif
[Wed Jul 25 06:14:07 2012] Mean detx,y = (-3147.49, -724.23) 
[Wed Jul 25 06:14:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 06:14:40 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 06:14:40 2012] Setting source spectrum file to fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Wed Jul 25 06:14:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Wed Jul 25 10:50:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 25 10:50:55 2012] rmf not generated due to insufficient counts
[Wed Jul 25 18:52:25 2012] Updating aperture counts using extracted products
[Wed Jul 25 18:52:25 2012] Error reading totcts from fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Wed Jul 25 18:52:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:52:29 2012] Using photon index=1.80, rate=0.00726, arf fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src85.arf
[Wed Jul 25 18:52:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:52:29 2012] Updating source flux to 2.9e-14
[Wed Jul 25 19:08:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting