[Tue Jul 24 00:20:24 2012] Detection parameters:
  Position = (171.1, 262.1) = 5 37 31.99 -69 18 46.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1096.7 +/- 48.7
  Background counts = 366.7
  Rate = 0.01 +/- 0.0005

[Tue Jul 24 00:20:27 2012] Off-axis axis estimate = 9.60'
[Tue Jul 24 00:29:51 2012] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 00:29:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 24 00:29:51 2012] Initial guess for spatial extent in simple fitting = 11.23"
[Tue Jul 24 00:29:51 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.948
[Tue Jul 24 00:29:51 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.23"
[Tue Jul 24 06:25:22 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src5.ximg exists
[Tue Jul 24 06:25:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src5.csv
[Tue Jul 24 06:25:22 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Jul 24 06:25:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src5.csv
[Tue Jul 24 06:25:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 06:25:24 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Jul 24 06:25:24 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Jul 24 06:25:24 2012] Fit fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Jul 24 13:37:36 2012] Warning, spatial fit 5 centroid is now closest to src. 25
[Tue Jul 24 13:37:38 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 13:37:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 13:37:38 2012] Assessing source extent using major
[Tue Jul 24 13:37:38 2012] Source does appear to be extended
[Tue Jul 24 13:37:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 13:38:36 2012] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 13:38:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 24 13:38:36 2012] Initial guess for spatial extent in simple fitting = 11.23"
[Tue Jul 24 13:38:36 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.948
[Tue Jul 24 13:38:36 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.23"
[Tue Jul 24 19:25:43 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src5.ximg exists
[Tue Jul 24 19:25:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src5.csv
[Tue Jul 24 19:25:43 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Jul 24 19:25:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src5.csv
[Tue Jul 24 19:25:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 19:25:45 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Jul 24 19:25:45 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jul 24 19:25:45 2012] Fit fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Jul 25 03:29:55 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.319381 pixels away
[Wed Jul 25 03:29:56 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 03:29:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 03:29:56 2012] Assessing source extent using major
[Wed Jul 25 03:29:56 2012] Source does appear to be extended
[Wed Jul 25 03:29:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 03:30:50 2012] Counts = 1096.720215, rescaling region sizes by 2.000000
[Wed Jul 25 03:30:50 2012] XMMSAS src. selection expression = ellipse(14840.929520, 22757.434357, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jul 25 03:30:50 2012] Writing source region out to fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src5_src.reg
[Wed Jul 25 03:30:50 2012] Extracting stamp from image fullrun_pn_xmm0406840301_pi300-10000_cl_sm2.00.img.gz, (96, 187) - (246, 337)
[Wed Jul 25 03:30:50 2012] XMMSAS bgd. selection expression = annulus(14840.929520, 22757.434357, 4350.000000, 8700.000000, X, Y) && !ellipse(18522.662628, 29208.287354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22752.360000, 29548.236000, 1405.720040, 1405.720040, 0.000000, X, Y) && !ellipse(15977.268784, 27556.091827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13190.785004, 32047.636749, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(13185.022780, 32960.282200, 2124.756061, 2124.756061, 0.000000, X, Y) && !ellipse(19310.116440, 25551.544708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17153.242800, 18652.380400, 1778.224051, 427.045612, 145.938000, X, Y) && !ellipse(16464.986000, 18263.238000, 3422.512098, 3422.512098, 0.000000, X, Y) && !ellipse(16022.758000, 17931.128000, 1578.704045, 1578.704045, 0.000000, X, Y) && !ellipse(20455.484000, 31864.076000, 1491.816043, 1491.816043, 0.000000, X, Y) && !ellipse(15359.658000, 23596.066000, 288.942408, 288.942408, 0.000000, X, Y) && !ellipse(17582.122000, 18941.444000, 1711.256049, 1711.256049, 0.000000, X, Y) && !ellipse(10735.026000, 31048.290000, 2061.376059, 2061.376059, 0.000000, X, Y) && !ellipse(17415.143707, 23909.053314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15242.055328, 20658.600510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19348.834732, 20132.430786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19684.151657, 13296.264008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11088.182000, 31703.778000, 2101.160060, 2101.160060, 0.000000, X, Y) && !ellipse(21440.373886, 31295.636871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11107.520248, 31131.781738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21546.714000, 30430.388000, 1405.720040, 1405.720040, 0.000000, X, Y) && !ellipse(21003.182159, 31284.549469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19614.452000, 30640.012000, 1540.160044, 1540.160044, 0.000000, X, Y) && !ellipse(15260.161301, 30482.141205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24286.156000, 30328.860000, 1335.672038, 1335.672038, 0.000000, X, Y) && !ellipse(20851.321121, 30012.243500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22046.973740, 30043.320618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17382.566498, 30043.471954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18741.723785, 14657.917023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15399.526443, 28147.427917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15525.198273, 27182.866394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22813.715668, 26770.312012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23603.268280, 26644.691956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22226.909058, 26357.784180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11796.950378, 26015.819061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22997.310300, 26031.972801, 1054.816030, 1046.883596, 261.818915, X, Y) && !ellipse(18793.111877, 24845.877747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19959.548553, 24574.929352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19475.248642, 24528.200836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18887.454361, 23938.149780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15944.188446, 23957.271301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19707.008804, 23689.862061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16396.330600, 23943.611880, 1665.408048, 312.723209, 7.710510, X, Y) && !ellipse(17664.903641, 23316.849030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19178.703110, 23206.418396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18121.791702, 23437.052826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23836.098000, 23071.040000, 1220.640035, 1220.640035, 0.000000, X, Y) && !ellipse(23343.911743, 22763.570129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18652.326294, 23263.650208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18330.814194, 22672.452179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20279.836685, 22679.418976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19844.929611, 22787.985779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22695.635895, 22324.534485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20745.289871, 22386.736511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19983.569931, 22323.196350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17674.852036, 22402.871124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21982.153854, 21854.537216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22535.001312, 15117.568970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19164.800049, 22229.221588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21609.947952, 21620.176453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21146.495331, 21346.022110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19787.092000, 20420.953000, 1611.912046, 1611.912046, 0.000000, X, Y) && !ellipse(14677.491226, 20437.918457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18718.625031, 19696.020966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16293.760223, 18901.022888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21916.249390, 19009.199402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15307.000000, 18742.857483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17134.281433, 17720.142853, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 03:30:50 2012] Writing fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src5.gif
[Wed Jul 25 03:41:37 2012] Mean detx,y = (-4707.99, 12347.95) 
[Wed Jul 25 03:41:44 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 03:43:30 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 03:43:31 2012] Setting source spectrum file to fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jul 25 03:43:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jul 25 08:22:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 25 08:22:20 2012] rmf not generated due to insufficient counts
[Wed Jul 25 18:52:24 2012] Updating aperture counts using extracted products
[Wed Jul 25 18:52:24 2012] Error reading totcts from fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jul 25 18:52:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:52:28 2012] Using photon index=1.80, rate=0.0103, arf fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src5.arf
[Wed Jul 25 18:52:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:52:28 2012] Updating source flux to 5.6e-14
[Wed Jul 25 19:08:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting