[Tue Jul 24 00:20:24 2012] Detection parameters:
  Position = (294.0, 393.3) = 5 35 51.09 -69 9 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 456.5 +/- 32.8
  Background counts = 314.0
  Rate = 0.004 +/- 0.0003

[Tue Jul 24 00:20:27 2012] Off-axis axis estimate = 6.89'
[Tue Jul 24 00:29:51 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 00:29:51 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Tue Jul 24 00:29:51 2012] source mask rpix=2.3, npix_max = 30, mask sum = 23, frac = 0.750
[Tue Jul 24 00:29:51 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 9.87"
[Tue Jul 24 06:25:22 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src27.ximg exists
[Tue Jul 24 06:25:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src27.csv
[Tue Jul 24 06:25:22 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue Jul 24 06:25:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src27.csv
[Tue Jul 24 06:25:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 06:25:24 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue Jul 24 06:25:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Tue Jul 24 06:25:24 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue Jul 24 06:25:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Tue Jul 24 06:25:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 13:37:36 2012] Spatial fit model total counts = 3889.880000, observed total counts = 3282.000000
[Tue Jul 24 13:37:36 2012] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 24 13:37:38 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 13:37:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 13:37:38 2012] Assessing source extent using major
[Tue Jul 24 13:37:38 2012] Source does appear to be extended
[Tue Jul 24 13:37:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 13:37:38 2012] Source is confused with source 26
[Tue Jul 24 13:38:36 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 13:38:36 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Tue Jul 24 13:38:36 2012] source mask rpix=2.3, npix_max = 30, mask sum = 23, frac = 0.750
[Tue Jul 24 13:38:36 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 9.87"
[Tue Jul 24 19:25:43 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src26.ximg exists
[Tue Jul 24 19:25:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src26.csv
[Tue Jul 24 19:25:43 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue Jul 24 19:25:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src26.csv
[Tue Jul 24 19:25:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 19:25:45 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue Jul 24 19:25:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue Jul 24 19:25:46 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue Jul 24 19:25:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue Jul 24 19:25:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 03:29:55 2012] Source 29 is offset by 0.455804 and -1.098656 pixels which is larger than
2 X fitted extent = 1.055747 x 1.055747, not incorporating fit results
[Wed Jul 25 03:29:55 2012] Spatial fit model total counts = 6811.300000, observed total counts = 3282.000000
[Wed Jul 25 03:29:55 2012] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 25 03:29:56 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 03:29:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 03:29:56 2012] Assessing source extent using major
[Wed Jul 25 03:29:56 2012] Source does appear to be extended
[Wed Jul 25 03:29:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 03:30:52 2012] XMMSAS src. selection expression = ellipse(25530.354919, 34172.716888, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 03:30:52 2012] Writing source region out to fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src29_src.reg
[Wed Jul 25 03:30:52 2012] Extracting stamp from image fullrun_pn_xmm0406840301_pi300-10000_cl_sm2.00.img.gz, (257, 356) - (332, 431)
[Wed Jul 25 03:30:52 2012] XMMSAS bgd. selection expression = annulus(25530.354919, 34172.716888, 1087.500000, 2175.000000, X, Y) && !ellipse(26219.037659, 33437.138367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22819.277600, 34002.697400, 1184.544034, 1184.544034, 0.000000, X, Y) && !ellipse(25061.020081, 32978.293549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22271.146000, 33552.339600, 1424.128041, 1424.128041, 0.000000, X, Y) && !ellipse(24927.491200, 34215.770600, 1586.848046, 616.112818, 16.480400, X, Y) && !ellipse(24248.235962, 34393.554260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23488.263031, 34662.160919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24592.972931, 33645.414795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22840.828827, 33022.425446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25701.423767, 32268.949371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.184000, 32245.252000, 1149.200033, 1149.200033, 0.000000, X, Y) && !ellipse(26227.398346, 31599.159821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27730.245200, 31319.122000, 1390.024040, 1390.024040, 0.000000, X, Y) && !ellipse(27923.682000, 31127.660000, 1421.528041, 1421.528041, 0.000000, X, Y)
[Wed Jul 25 03:30:52 2012] Writing fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src29.gif
[Wed Jul 25 05:01:16 2012] Mean detx,y = (-8296.27, -2697.23) 
[Wed Jul 25 05:01:22 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 05:01:46 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 05:01:46 2012] Setting source spectrum file to fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Jul 25 05:01:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed Jul 25 09:52:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 25 09:52:01 2012] rmf not generated due to insufficient counts
[Wed Jul 25 18:52:24 2012] Updating aperture counts using extracted products
[Wed Jul 25 18:52:24 2012] Error reading totcts from fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Jul 25 18:52:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:52:28 2012] Using photon index=1.80, rate=0.00427, arf fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src29.arf
[Wed Jul 25 18:52:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:52:28 2012] Updating source flux to 2.2e-14
[Wed Jul 25 19:08:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting