[Tue Jul 24 00:20:24 2012] Detection parameters:
  Position = (286.5, 393.9) = 5 35 57.25 -69 9 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 705.1 +/- 42.4
  Background counts = 324.5
  Rate = 0.007 +/- 0.0004

[Tue Jul 24 00:20:27 2012] Off-axis axis estimate = 6.98'
[Tue Jul 24 00:29:51 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 00:29:51 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Tue Jul 24 00:29:51 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.970
[Tue Jul 24 00:29:51 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 9.92"
[Tue Jul 24 06:25:22 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src24.ximg exists
[Tue Jul 24 06:25:22 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src24_1.ximg exists
[Tue Jul 24 06:25:22 2012] Fit fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_src24 appears to have run properly
[Tue Jul 24 06:25:24 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Tue Jul 24 06:25:24 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Tue Jul 24 06:25:24 2012] Fit fullrun_pn_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Tue Jul 24 13:37:36 2012] Spatial fit model total counts = 4540.780000, observed total counts = 4283.000000
[Tue Jul 24 13:37:36 2012] Offset between fit and detection position for source 26 = 0.636509 pixels
[Tue Jul 24 13:37:36 2012] 4383.092000 total counts/ 3529.920000 bgd. counts: snr = 14.359991
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.636509 pixels
  Position = (287.1, 393.8) = 5 35 56.74 -69 9 16.9
  Extent = 19.8 (18.1-39.7)" x 7.7 (6.5-9.2)", rotation angle = 16 (10-23) degrees
  Source counts = 853.2 +/- 66.2
  Background counts = 3529.9
  Rate = 0.009 +/- 0.0007
[Tue Jul 24 13:37:38 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 13:37:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 13:37:38 2012] Assessing source extent using major axis lower bound
[Tue Jul 24 13:37:38 2012] Source does appear to be extended
[Tue Jul 24 13:37:38 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.98
[Tue Jul 24 13:37:38 2012] Source is asymmetric
[Tue Jul 24 13:37:38 2012] Source is confused with source 29
[Tue Jul 24 13:37:38 2012] Source is confused with source 48
[Tue Jul 24 13:37:38 2012] Source is confused with source 50
[Tue Jul 24 13:38:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 24 13:38:36 2012] Initial guess for spatial extent in simple fitting = 13.77"
[Tue Jul 24 13:38:36 2012] source mask rpix=3.2, npix_max = 53, mask sum = 64, frac = 1.191
[Tue Jul 24 13:38:36 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 13.77"
[Tue Jul 24 19:25:43 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src23.ximg exists
[Tue Jul 24 19:25:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src23.csv
[Tue Jul 24 19:25:43 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src23_1.ximg exists
[Tue Jul 24 19:25:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src23.csv
[Tue Jul 24 19:25:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 19:25:45 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Tue Jul 24 19:25:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src23.csv
[Tue Jul 24 19:25:45 2012] fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Tue Jul 24 19:25:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src23.csv
[Tue Jul 24 19:25:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 03:29:55 2012] Spatial fit model total counts = 6207.470000, observed total counts = 5347.000000
[Wed Jul 25 03:29:55 2012] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 25 03:29:55 2012] Spatial fit model total counts = 4946.880000, observed total counts = 3352.000000
[Wed Jul 25 03:29:55 2012] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 25 03:29:56 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 03:29:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 03:29:56 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 03:29:56 2012] Source does appear to be extended
[Wed Jul 25 03:29:56 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.98
[Wed Jul 25 03:29:56 2012] Source is asymmetric
[Wed Jul 25 03:30:51 2012] XMMSAS src. selection expression = ellipse(24927.491200, 34215.770600, 1190.136034, 462.084613, 16.480400, X, Y)
[Wed Jul 25 03:30:51 2012] Writing source region out to fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src26_src.reg
[Wed Jul 25 03:30:51 2012] Extracting stamp from image fullrun_pn_xmm0406840301_pi300-10000_cl_sm2.00.img.gz, (219, 325) - (355, 462)
[Wed Jul 25 03:30:51 2012] XMMSAS bgd. selection expression = annulus(24927.491200, 34215.770600, 1983.560057, 3967.120114, X, Y) && !ellipse(22752.360000, 29548.236000, 1405.720040, 1405.720040, 0.000000, X, Y) && !ellipse(26219.037659, 33437.138367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22819.277600, 34002.697400, 1184.544034, 1184.544034, 0.000000, X, Y) && !ellipse(25061.020081, 32978.293549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22271.146000, 33552.339600, 1424.128041, 1424.128041, 0.000000, X, Y) && !ellipse(20455.484000, 31864.076000, 1491.816043, 1491.816043, 0.000000, X, Y) && !ellipse(25530.354919, 34172.716888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25980.464691, 30224.462646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20441.709000, 37783.107400, 1088.888031, 1088.888031, 0.000000, X, Y) && !ellipse(24248.235962, 34393.554260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23488.263031, 34662.160919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24592.972931, 33645.414795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22840.828827, 33022.425446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25701.423767, 32268.949371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.184000, 32245.252000, 1149.200033, 1149.200033, 0.000000, X, Y) && !ellipse(26227.398346, 31599.159821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21440.373886, 31295.636871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27730.245200, 31319.122000, 1390.024040, 1390.024040, 0.000000, X, Y) && !ellipse(24583.135480, 31101.368800, 623.307218, 623.307218, 0.000000, X, Y) && !ellipse(27923.682000, 31127.660000, 1421.528041, 1421.528041, 0.000000, X, Y) && !ellipse(26448.712000, 31083.614000, 345.498410, 345.498410, 0.000000, X, Y) && !ellipse(21546.714000, 30430.388000, 1405.720040, 1405.720040, 0.000000, X, Y) && !ellipse(21003.182159, 31284.549469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19614.452000, 30640.012000, 1540.160044, 1540.160044, 0.000000, X, Y) && !ellipse(26808.292206, 30579.647156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24286.156000, 30328.860000, 1335.672038, 1335.672038, 0.000000, X, Y) && !ellipse(20851.321121, 30012.243500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22046.973740, 30043.320618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27001.076538, 29569.591705, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 03:30:51 2012] Writing fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src26.gif
[Wed Jul 25 04:44:01 2012] Mean detx,y = (-8496.39, -2269.26) 
[Wed Jul 25 04:44:09 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 04:44:39 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 04:44:40 2012] Setting source spectrum file to fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Jul 25 04:44:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed Jul 25 18:52:24 2012] Updating aperture counts using extracted products
[Wed Jul 25 18:52:24 2012] Error reading totcts from fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Jul 25 18:52:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:52:28 2012] Using photon index=1.80, rate=0.00922, arf fullrun_pn_xmm0406840301_pi300-10000_pass1_cl_src26.arf
[Wed Jul 25 18:52:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:52:28 2012] Updating source flux to 4.3e-14
[Wed Jul 25 19:08:05 2012] Flag p found in src. 26 procflags, skipping spectral fitting
[Wed Jul 25 19:08:05 2012] Flag c found in src. 26 procflags, skipping spectral fitting