[Tue Jul 24 00:21:44 2012] Detection parameters:
  Position = (311.0, 242.4) = 5 35 37.17 -69 20 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.2 +/- 19.5
  Background counts = 142.7
  Rate = 0.001 +/- 0.0002

[Tue Jul 24 00:21:44 2012] Off-axis axis estimate = 4.17'
[Tue Jul 24 08:58:03 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 08:58:03 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Tue Jul 24 08:58:03 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.829
[Tue Jul 24 08:58:03 2012] Giving source the simple spatial ID 87 for pass 0, mean size = 8.51"
[Tue Jul 24 13:37:09 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src87.ximg exists
[Tue Jul 24 13:37:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src87.csv
[Tue Jul 24 13:37:09 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src87_1.ximg exists
[Tue Jul 24 13:37:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src87.csv
[Tue Jul 24 13:37:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 13:37:11 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Tue Jul 24 13:37:11 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Tue Jul 24 13:37:11 2012] Fit fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src87 appears to have run properly
[Tue Jul 24 13:38:11 2012] Warning, spatial fit 87 centroid is now closest to src. 93
[Tue Jul 24 13:38:11 2012] Source 95 is offset by 7.660785 and -4.180007 pixels which is larger than
2 X fitted extent = 1.331145 x 1.331145, not incorporating fit results
[Tue Jul 24 13:38:11 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 13:38:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 13:38:11 2012] Assessing source extent using major
[Tue Jul 24 13:38:11 2012] Source does appear to be extended
[Tue Jul 24 13:38:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 21:44:27 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 21:44:27 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Tue Jul 24 21:44:27 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.829
[Tue Jul 24 21:44:27 2012] Giving source the simple spatial ID 81 for pass 1, mean size = 8.51"
[Wed Jul 25 03:29:28 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src81.ximg exists
[Wed Jul 25 03:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src81.csv
[Wed Jul 25 03:29:28 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src81_1.ximg exists
[Wed Jul 25 03:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src81.csv
[Wed Jul 25 03:29:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 03:29:30 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src81.ximg exists
[Wed Jul 25 03:29:30 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src81_1.ximg exists
[Wed Jul 25 03:29:30 2012] Fit fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src81 appears to have run properly
[Wed Jul 25 03:30:22 2012] Source 95 is offset by 7.811651 and -3.819995 pixels which is larger than
2 X fitted extent = 2.643269 x 2.643269, not incorporating fit results
[Wed Jul 25 03:30:22 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 03:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 03:30:22 2012] Assessing source extent using major
[Wed Jul 25 03:30:22 2012] Source does appear to be extended
[Wed Jul 25 03:30:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 03:30:22 2012] Source is confused with source 84
[Wed Jul 25 14:43:28 2012] XMMSAS src. selection expression = ellipse(27007.209656, 21037.648422, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 14:43:28 2012] Writing source region out to fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src95_src.reg
[Wed Jul 25 14:43:28 2012] Extracting stamp from image fullrun_mos2_xmm0406840301_pi300-10000_cl_sm2.00.img.gz, (273, 205) - (348, 280)
[Wed Jul 25 14:43:28 2012] XMMSAS bgd. selection expression = annulus(27007.209656, 21037.648422, 1087.500000, 2175.000000, X, Y) && !ellipse(26224.817657, 23587.131012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25741.995270, 23919.084015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25460.572784, 21207.657913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26113.948944, 22152.041214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25203.361511, 22060.392258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27280.192000, 21888.228000, 1276.360037, 1276.360037, 0.000000, X, Y)
[Wed Jul 25 14:43:28 2012] Writing fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src95.gif
[Wed Jul 25 16:01:12 2012] Mean detx,y = (-3480.95, -3392.39) 
[Wed Jul 25 16:01:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 16:01:22 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 16:01:22 2012] Setting source spectrum file to fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Wed Jul 25 16:01:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src95_bgd.pi.gz
[Wed Jul 25 18:32:56 2012] Not generating rmf since there are only 94 counts
[Wed Jul 25 18:32:56 2012] rmf not generated due to insufficient counts
[Wed Jul 25 18:52:38 2012] Updating aperture counts using extracted products
[Wed Jul 25 18:52:38 2012] Error reading totcts from fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Wed Jul 25 18:52:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:52:40 2012] Using photon index=1.80, rate=0.000958, arf fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src95.arf
[Wed Jul 25 18:52:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:52:40 2012] Updating source flux to 1.1e-14
[Wed Jul 25 18:58:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting