[Tue Jul 24 00:21:43 2012] Detection parameters:
  Position = (298.0, 281.5) = 5 35 47.84 -69 17 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 254.1 +/- 29.0
  Background counts = 155.4
  Rate = 0.003 +/- 0.0003

[Tue Jul 24 00:21:44 2012] Off-axis axis estimate = 1.23'
[Tue Jul 24 08:58:03 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 08:58:03 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Tue Jul 24 08:58:03 2012] source mask rpix=1.6, npix_max = 17, mask sum = 14, frac = 0.780
[Tue Jul 24 08:58:03 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.04"
[Tue Jul 24 13:37:07 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src23.ximg exists
[Tue Jul 24 13:37:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src23.csv
[Tue Jul 24 13:37:07 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src23_1.ximg exists
[Tue Jul 24 13:37:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src23.csv
[Tue Jul 24 13:37:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 13:37:09 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Tue Jul 24 13:37:09 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Tue Jul 24 13:37:09 2012] Fit fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Tue Jul 24 13:38:11 2012] Warning, spatial fit 23 centroid is now closest to src. 65
[Tue Jul 24 13:38:11 2012] Source 67 is offset by -5.299732 and 0.869135 pixels which is larger than
2 X fitted extent = 0.914331 x 0.914331, not incorporating fit results
[Tue Jul 24 13:38:11 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 13:38:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 13:38:11 2012] Assessing source extent using major
[Tue Jul 24 13:38:11 2012] Source does appear to be extended
[Tue Jul 24 13:38:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 13:38:11 2012] Source is confused with source 13
[Tue Jul 24 13:38:11 2012] Source is confused with source 65
[Tue Jul 24 21:44:27 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 21:44:27 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Tue Jul 24 21:44:27 2012] source mask rpix=1.6, npix_max = 17, mask sum = 14, frac = 0.780
[Tue Jul 24 21:44:27 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 7.04"
[Wed Jul 25 03:29:27 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src23.ximg exists
[Wed Jul 25 03:29:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src23.csv
[Wed Jul 25 03:29:27 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src23_1.ximg exists
[Wed Jul 25 03:29:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src23.csv
[Wed Jul 25 03:29:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 03:29:29 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Wed Jul 25 03:29:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed Jul 25 03:29:29 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Wed Jul 25 03:29:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed Jul 25 03:29:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 03:30:22 2012] Warning, spatial fit 23 centroid is now closest to src. 65
[Wed Jul 25 03:30:22 2012] Source 67 is offset by -5.295410 and 0.869135 pixels which is larger than
2 X fitted extent = 0.931467 x 0.931467, not incorporating fit results
[Wed Jul 25 03:30:22 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 03:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 03:30:22 2012] Assessing source extent using major
[Wed Jul 25 03:30:22 2012] Source does appear to be extended
[Wed Jul 25 03:30:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 14:43:25 2012] XMMSAS src. selection expression = ellipse(25878.259338, 24445.334717, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 14:43:25 2012] Writing source region out to fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src67_src.reg
[Wed Jul 25 14:43:25 2012] Extracting stamp from image fullrun_mos2_xmm0406840301_pi300-10000_cl_sm2.00.img.gz, (261, 244) - (336, 319)
[Wed Jul 25 14:43:25 2012] XMMSAS bgd. selection expression = annulus(25878.259338, 24445.334717, 1087.500000, 2175.000000, X, Y) && !ellipse(27982.974340, 25914.860200, 1240.120836, 1240.120836, 0.000000, X, Y) && !ellipse(26224.817657, 23587.131012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25741.995270, 23919.084015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28902.608000, 25683.212000, 1201.984035, 1201.984035, 347.400000, X, Y) && !ellipse(27881.829407, 24732.521271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27274.634827, 27535.063995, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28376.145416, 25072.033142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25943.859802, 24821.061188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22946.294200, 26278.104000, 1220.760035, 1220.760035, 0.000000, X, Y) && !ellipse(27295.296265, 24294.560913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26113.948944, 22152.041214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25203.361511, 22060.392258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23006.125641, 26534.240082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27280.192000, 21888.228000, 1276.360037, 1276.360037, 0.000000, X, Y)
[Wed Jul 25 14:43:25 2012] Writing fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src67.gif
[Wed Jul 25 15:11:46 2012] Mean detx,y = (-24.42, -2451.62) 
[Wed Jul 25 15:11:47 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 15:11:58 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 15:11:58 2012] Setting source spectrum file to fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Wed Jul 25 15:11:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Wed Jul 25 17:06:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 25 17:06:41 2012] rmf not generated due to insufficient counts
[Wed Jul 25 18:52:36 2012] Updating aperture counts using extracted products
[Wed Jul 25 18:52:36 2012] Error reading totcts from fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Wed Jul 25 18:52:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:52:38 2012] Using photon index=1.80, rate=0.00295, arf fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src67.arf
[Wed Jul 25 18:52:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:52:38 2012] Updating source flux to 3.3e-14
[Wed Jul 25 18:58:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting