[Tue Jul 24 00:21:43 2012] Detection parameters:
  Position = (307.2, 368.8) = 5 35 40.36 -69 10 59.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.0 +/- 17.3
  Background counts = 113.5
  Rate = 0.001 +/- 0.0002

[Tue Jul 24 00:21:44 2012] Off-axis axis estimate = 5.14'
[Tue Jul 24 08:58:03 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 08:58:03 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Tue Jul 24 08:58:03 2012] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.909
[Tue Jul 24 08:58:03 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 9.00"
[Tue Jul 24 13:37:08 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src73.ximg exists
[Tue Jul 24 13:37:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src73.csv
[Tue Jul 24 13:37:08 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src73_1.ximg exists
[Tue Jul 24 13:37:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src73.csv
[Tue Jul 24 13:37:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 13:37:10 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Tue Jul 24 13:37:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src73.csv
[Tue Jul 24 13:37:10 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Tue Jul 24 13:37:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src73.csv
[Tue Jul 24 13:37:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 13:38:11 2012] Warning, spatial fit 73 centroid is now closest to src. 27
[Tue Jul 24 13:38:11 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 13:38:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 13:38:11 2012] Assessing source extent using major
[Tue Jul 24 13:38:11 2012] Source does appear to be extended
[Tue Jul 24 13:38:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 13:38:11 2012] Source is confused with source 27
[Tue Jul 24 21:44:27 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 21:44:27 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Tue Jul 24 21:44:27 2012] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.909
[Tue Jul 24 21:44:27 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 9.00"
[Wed Jul 25 03:29:28 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src70.ximg exists
[Wed Jul 25 03:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src70.csv
[Wed Jul 25 03:29:28 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src70_1.ximg exists
[Wed Jul 25 03:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src70.csv
[Wed Jul 25 03:29:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 03:29:30 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Wed Jul 25 03:29:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src70.csv
[Wed Jul 25 03:29:30 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Wed Jul 25 03:29:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src70.csv
[Wed Jul 25 03:29:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 03:30:22 2012] Source 43 is offset by -6.177369 and 6.272043 pixels which is larger than
2 X fitted extent = 1.272156 x 1.272156, not incorporating fit results
[Wed Jul 25 03:30:22 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 03:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 03:30:22 2012] Assessing source extent using major
[Wed Jul 25 03:30:22 2012] Source does appear to be extended
[Wed Jul 25 03:30:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 14:43:27 2012] XMMSAS src. selection expression = ellipse(26674.892914, 32037.523743, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 14:43:27 2012] Writing source region out to fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src43_src.reg
[Wed Jul 25 14:43:27 2012] Extracting stamp from image fullrun_mos2_xmm0406840301_pi300-10000_cl_sm2.00.img.gz, (270, 331) - (345, 406)
[Wed Jul 25 14:43:27 2012] XMMSAS bgd. selection expression = annulus(26674.892914, 32037.523743, 1087.500000, 2175.000000, X, Y) && !ellipse(25960.704000, 33719.038000, 1426.496041, 1426.496041, 0.000000, X, Y) && !ellipse(25234.614000, 34136.023400, 1586.200046, 1586.200046, 0.000000, X, Y) && !ellipse(27261.582000, 32360.514000, 1441.024041, 777.134422, 65.815000, X, Y) && !ellipse(23016.426000, 34035.056000, 3182.336092, 3182.336092, 0.000000, X, Y) && !ellipse(26449.623200, 31077.209800, 350.878410, 350.878410, 0.000000, X, Y) && !ellipse(26983.966000, 29434.472000, 1248.752036, 1248.752036, 0.000000, X, Y) && !ellipse(27739.940000, 31393.856000, 1437.592041, 1437.592041, 0.000000, X, Y) && !ellipse(27622.035036, 31544.619044, 1441.024041, 824.925662, 67.050014, X, Y) && !ellipse(24789.522000, 34252.032800, 1596.488046, 675.345619, 21.621700, X, Y) && !ellipse(26610.073029, 33707.837189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27197.234000, 30053.168000, 2489.320072, 2489.320072, 0.000000, X, Y) && !ellipse(24020.528000, 30007.020000, 1332.056038, 1332.056038, 0.000000, X, Y) && !ellipse(24519.959625, 33811.858582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23648.014000, 34834.888000, 1622.360047, 1622.360047, 0.000000, X, Y) && !ellipse(26767.111600, 31119.528000, 2665.376077, 2665.376077, 0.000000, X, Y)
[Wed Jul 25 14:43:27 2012] Writing fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src43.gif
[Wed Jul 25 15:58:05 2012] Mean detx,y = (5879.36, 2389.05) 
[Wed Jul 25 15:58:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 15:58:18 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 15:58:18 2012] Setting source spectrum file to fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Jul 25 15:58:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Wed Jul 25 18:27:55 2012] Not generating rmf since there are only 79 counts
[Wed Jul 25 18:27:55 2012] rmf not generated due to insufficient counts
[Wed Jul 25 18:52:37 2012] Updating aperture counts using extracted products
[Wed Jul 25 18:52:37 2012] Error reading totcts from fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Jul 25 18:52:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:52:39 2012] Using photon index=1.80, rate=0.00115, arf fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src43.arf
[Wed Jul 25 18:52:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:52:39 2012] Updating source flux to 1.7e-14
[Wed Jul 25 18:58:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting