[Tue Jul 24 00:21:43 2012] Detection parameters:
  Position = (200.2, 346.1) = 5 37 7.77 -69 12 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.3 +/- 19.2
  Background counts = 75.0
  Rate = 0.001 +/- 0.0002

[Tue Jul 24 00:21:44 2012] Off-axis axis estimate = 7.92'
[Tue Jul 24 08:58:03 2012] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 08:58:03 2012] Initial guess for spatial extent in simple fitting = 10.39"
[Tue Jul 24 08:58:03 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.899
[Tue Jul 24 08:58:03 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 10.39"
[Tue Jul 24 13:37:08 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src61.ximg exists
[Tue Jul 24 13:37:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src61.csv
[Tue Jul 24 13:37:08 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src61_1.ximg exists
[Tue Jul 24 13:37:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src61.csv
[Tue Jul 24 13:37:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 13:37:10 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Tue Jul 24 13:37:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src61.csv
[Tue Jul 24 13:37:10 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Tue Jul 24 13:37:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src61.csv
[Tue Jul 24 13:37:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 13:38:11 2012] Spatial fit model total counts = 956.421000, observed total counts = 843.000000
[Tue Jul 24 13:38:11 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 24 13:38:11 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 13:38:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 13:38:11 2012] Assessing source extent using major
[Tue Jul 24 13:38:11 2012] Source does appear to be extended
[Tue Jul 24 13:38:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 21:44:27 2012] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 21:44:27 2012] Initial guess for spatial extent in simple fitting = 10.39"
[Tue Jul 24 21:44:27 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.899
[Tue Jul 24 21:44:27 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 10.39"
[Wed Jul 25 03:29:28 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src59.ximg exists
[Wed Jul 25 03:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src59.csv
[Wed Jul 25 03:29:28 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src59_1.ximg exists
[Wed Jul 25 03:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src59.csv
[Wed Jul 25 03:29:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 03:29:30 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Wed Jul 25 03:29:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src59.csv
[Wed Jul 25 03:29:30 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Wed Jul 25 03:29:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src59.csv
[Wed Jul 25 03:29:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 03:30:22 2012] Source 30 is offset by -0.522772 and -2.634405 pixels which is larger than
2 X fitted extent = 1.214322 x 1.214322, not incorporating fit results
[Wed Jul 25 03:30:22 2012] Spatial fit model total counts = 956.928000, observed total counts = 843.000000
[Wed Jul 25 03:30:22 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 25 03:30:22 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 03:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 03:30:22 2012] Assessing source extent using major
[Wed Jul 25 03:30:22 2012] Source does appear to be extended
[Wed Jul 25 03:30:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 14:43:27 2012] XMMSAS src. selection expression = ellipse(17368.186859, 30060.474762, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 14:43:27 2012] Writing source region out to fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src30_src.reg
[Wed Jul 25 14:43:27 2012] Extracting stamp from image fullrun_mos2_xmm0406840301_pi300-10000_cl_sm2.00.img.gz, (163, 309) - (238, 384)
[Wed Jul 25 14:43:27 2012] XMMSAS bgd. selection expression = annulus(17368.186859, 30060.474762, 1087.500000, 2175.000000, X, Y) && !ellipse(18497.547379, 29162.642090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20862.404000, 31595.432000, 1517.864044, 1517.864044, 0.000000, X, Y) && !ellipse(20384.915000, 31508.688600, 964.448028, 964.448028, 0.000000, X, Y) && !ellipse(16626.578766, 29415.647797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20718.352000, 31319.036000, 3070.608088, 3070.608088, 0.000000, X, Y) && !ellipse(15936.156000, 26903.805200, 1415.160041, 1415.160041, 0.000000, X, Y) && !ellipse(19851.714000, 30052.460000, 1148.080033, 1148.080033, 0.000000, X, Y)
[Wed Jul 25 14:43:27 2012] Writing fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src30.gif
[Wed Jul 25 15:53:28 2012] Mean detx,y = (9328.50, -6444.59) 
[Wed Jul 25 15:53:30 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 15:53:49 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 15:53:49 2012] Setting source spectrum file to fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Jul 25 15:53:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Wed Jul 25 18:17:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 25 18:17:02 2012] rmf not generated due to insufficient counts
[Wed Jul 25 18:52:37 2012] Updating aperture counts using extracted products
[Wed Jul 25 18:52:37 2012] Error reading totcts from fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Jul 25 18:52:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:52:39 2012] Using photon index=1.80, rate=0.0014, arf fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src30.arf
[Wed Jul 25 18:52:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:52:39 2012] Updating source flux to 3e-14
[Wed Jul 25 18:58:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting