[Tue Jul 24 00:21:42 2012] Detection parameters:
  Position = (212.3, 141.0) = 5 36 58.64 -69 27 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 417.1 +/- 28.7
  Background counts = 84.3
  Rate = 0.004 +/- 0.0003

[Tue Jul 24 00:21:44 2012] Off-axis axis estimate = 13.01'
[Tue Jul 24 08:58:03 2012] Using EEF radius (= 12.93 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 08:58:03 2012] Initial guess for spatial extent in simple fitting = 12.93"
[Tue Jul 24 08:58:03 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.870
[Tue Jul 24 08:58:03 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.93"
[Tue Jul 24 13:37:07 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src15.ximg exists
[Tue Jul 24 13:37:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src15.csv
[Tue Jul 24 13:37:07 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Jul 24 13:37:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src15.csv
[Tue Jul 24 13:37:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 13:37:09 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Jul 24 13:37:09 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Jul 24 13:37:09 2012] Fit fullrun_mos2_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Jul 24 13:38:11 2012] Warning, spatial fit 15 centroid is now closest to src. 101
[Tue Jul 24 13:38:11 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 13:38:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 13:38:11 2012] Assessing source extent using major
[Tue Jul 24 13:38:11 2012] Source does appear to be extended
[Tue Jul 24 13:38:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 21:44:27 2012] Using EEF radius (= 12.93 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 21:44:27 2012] Initial guess for spatial extent in simple fitting = 12.93"
[Tue Jul 24 21:44:27 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.870
[Tue Jul 24 21:44:27 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 12.93"
[Wed Jul 25 03:29:27 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src15.ximg exists
[Wed Jul 25 03:29:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src15.csv
[Wed Jul 25 03:29:27 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Jul 25 03:29:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src15.csv
[Wed Jul 25 03:29:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 03:29:29 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Jul 25 03:29:29 2012] fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Jul 25 03:29:29 2012] Fit fullrun_mos2_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Jul 25 03:30:22 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 17.299328 pixels away
[Wed Jul 25 03:30:22 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 03:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 03:30:22 2012] Assessing source extent using major
[Wed Jul 25 03:30:22 2012] Source does appear to be extended
[Wed Jul 25 03:30:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 14:43:25 2012] XMMSAS src. selection expression = ellipse(18425.513779, 12219.458466, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 14:43:25 2012] Writing source region out to fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src18_src.reg
[Wed Jul 25 14:43:25 2012] Extracting stamp from image fullrun_mos2_xmm0406840301_pi300-10000_cl_sm2.00.img.gz, (175, 104) - (250, 179)
[Wed Jul 25 14:43:25 2012] XMMSAS bgd. selection expression = annulus(18425.513779, 12219.458466, 1087.500000, 2175.000000, X, Y) && !ellipse(19367.864655, 11170.209473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15516.804398, 13541.422775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17162.649094, 13076.106323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20854.411575, 10901.682465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20487.462631, 10338.342331, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 14:43:25 2012] Writing fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src18.gif
[Wed Jul 25 14:56:47 2012] Mean detx,y = (-6130.63, -15383.82) 
[Wed Jul 25 14:56:48 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 14:57:01 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 14:57:01 2012] Setting source spectrum file to fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Jul 25 14:57:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Jul 25 16:36:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 25 16:36:05 2012] rmf not generated due to insufficient counts
[Wed Jul 25 18:52:36 2012] Updating aperture counts using extracted products
[Wed Jul 25 18:52:36 2012] Error reading totcts from fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Jul 25 18:52:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:52:38 2012] Using photon index=1.80, rate=0.00376, arf fullrun_mos2_xmm0406840301_pi300-10000_pass1_cl_src18.arf
[Wed Jul 25 18:52:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:52:38 2012] Updating source flux to 1e-13
[Wed Jul 25 18:58:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting