[Tue Jul 24 00:21:03 2012] Detection parameters:
  Position = (264.8, 302.9) = 5 36 15.07 -69 15 52.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.7 +/- 19.9
  Background counts = 142.6
  Rate = 0.001 +/- 0.0002

[Tue Jul 24 00:21:03 2012] Off-axis axis estimate = 2.46'
[Tue Jul 24 06:25:26 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 06:25:26 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Tue Jul 24 06:25:26 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.783
[Tue Jul 24 06:25:26 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 7.66"
[Tue Jul 24 08:58:01 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src63.ximg exists
[Tue Jul 24 08:58:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src63.csv
[Tue Jul 24 08:58:01 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src63_1.ximg exists
[Tue Jul 24 08:58:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src63.csv
[Tue Jul 24 08:58:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 08:58:02 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Tue Jul 24 08:58:02 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Tue Jul 24 08:58:02 2012] Fit fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Tue Jul 24 13:37:53 2012] Spatial fit model total counts = 1823.850000, observed total counts = 1823.000000
[Tue Jul 24 13:37:53 2012] Offset between fit and detection position for source 51 = 1.777237 pixels
[Tue Jul 24 13:37:53 2012] 1813.215000 total counts/ 1620.680000 bgd. counts: snr = 4.782567
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 1.777237 pixels
  Position = (263.1, 302.4) = 5 36 16.47 -69 15 54.7
  Extent = 15.3 (15.3-30.6)", rotation angle = 0
  Source counts = 192.5 +/- 42.6
  Background counts = 1620.7
  Rate = 0.002 +/- 0.0004
[Tue Jul 24 13:37:53 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 13:37:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 13:37:53 2012] Assessing source extent using major axis lower bound
[Tue Jul 24 13:37:53 2012] Source does appear to be extended
[Tue Jul 24 13:37:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 13:37:53 2012] Source is confused with source 49
[Tue Jul 24 19:25:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 24 19:25:48 2012] Initial guess for spatial extent in simple fitting = 15.32"
[Tue Jul 24 19:25:48 2012] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.989
[Tue Jul 24 19:25:48 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 15.32"
[Tue Jul 24 21:44:26 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src56.ximg exists
[Tue Jul 24 21:44:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src56.csv
[Tue Jul 24 21:44:26 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src56_1.ximg exists
[Tue Jul 24 21:44:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src56.csv
[Tue Jul 24 21:44:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 21:44:27 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Tue Jul 24 21:44:27 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Tue Jul 24 21:44:27 2012] Fit fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly
[Wed Jul 25 03:30:07 2012] Warning, spatial fit 56 centroid is now closest to src. 52
[Wed Jul 25 03:30:07 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 03:30:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 03:30:07 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 03:30:07 2012] Source does appear to be extended
[Wed Jul 25 03:30:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 12:10:20 2012] XMMSAS src. selection expression = ellipse(22837.623000, 26256.621200, 919.152026, 919.152026, 0.000000, X, Y)
[Wed Jul 25 12:10:20 2012] Writing source region out to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src51_src.reg
[Wed Jul 25 12:10:20 2012] Extracting stamp from image fullrun_mos1_xmm0406840301_pi300-10000_cl_sm2.00.img.gz, (210, 250) - (316, 355)
[Wed Jul 25 12:10:20 2012] XMMSAS bgd. selection expression = annulus(22837.623000, 26256.621200, 1531.920044, 3063.840088, X, Y) && !ellipse(26237.683800, 23632.671400, 1182.984034, 1182.984034, 0.000000, X, Y) && !ellipse(23126.066000, 29537.620000, 1089.016031, 1089.016031, 0.000000, X, Y) && !ellipse(26960.758000, 29351.473400, 1248.704036, 1248.704036, 0.000000, X, Y) && !ellipse(25937.801025, 24481.286469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21918.997345, 30156.594788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22125.087880, 26349.815400, 657.420819, 657.420819, 0.000000, X, Y) && !ellipse(23811.342926, 29864.323853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23629.229220, 26046.183600, 1182.264034, 1182.264034, 0.000000, X, Y)
[Wed Jul 25 12:10:20 2012] Writing fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src51.gif
[Wed Jul 25 12:51:11 2012] Mean detx,y = (-3770.00, -3344.73) 
[Wed Jul 25 12:51:13 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 12:51:31 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 12:51:31 2012] Setting source spectrum file to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Wed Jul 25 12:51:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Wed Jul 25 18:52:33 2012] Updating aperture counts using extracted products
[Wed Jul 25 18:52:33 2012] Error reading totcts from fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Wed Jul 25 18:52:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:52:35 2012] Using photon index=1.80, rate=0.00175, arf fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src51.arf
[Wed Jul 25 18:52:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:52:35 2012] Updating source flux to 2e-14
[Wed Jul 25 18:52:43 2012] Flag c found in src. 51 procflags, skipping spectral fitting