[Tue Jul 24 00:21:02 2012] Detection parameters:
  Position = (313.9, 372.1) = 5 35 34.83 -69 10 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.5 +/- 24.1
  Background counts = 108.4
  Rate = 0.003 +/- 0.0003

[Tue Jul 24 00:21:03 2012] Off-axis axis estimate = 5.46'
[Tue Jul 24 06:25:26 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 06:25:26 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Tue Jul 24 06:25:26 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.326
[Tue Jul 24 06:25:26 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.16"
[Tue Jul 24 08:58:00 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src17.ximg exists
[Tue Jul 24 08:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src17.csv
[Tue Jul 24 08:58:00 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Jul 24 08:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src17.csv
[Tue Jul 24 08:58:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 08:58:01 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Jul 24 08:58:01 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Jul 24 08:58:01 2012] Fit fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue Jul 24 13:37:53 2012] Warning, spatial fit 17 centroid is now closest to src. 28
[Tue Jul 24 13:37:53 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 13:37:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 13:37:53 2012] Assessing source extent using major
[Tue Jul 24 13:37:53 2012] Source does appear to be extended
[Tue Jul 24 13:37:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 13:37:53 2012] Source is confused with source 28
[Tue Jul 24 19:25:48 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 19:25:48 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Tue Jul 24 19:25:48 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.326
[Tue Jul 24 19:25:48 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 9.16"
[Tue Jul 24 21:44:25 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src16.ximg exists
[Tue Jul 24 21:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src16.csv
[Tue Jul 24 21:44:25 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Jul 24 21:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src16.csv
[Tue Jul 24 21:44:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 21:44:26 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Jul 24 21:44:26 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Jul 24 21:44:26 2012] Fit fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Wed Jul 25 03:30:07 2012] Warning, spatial fit 16 centroid is now closest to src. 28
[Wed Jul 25 03:30:07 2012] Spatial fit model total counts = 3262.260000, observed total counts = 3164.000000
[Wed Jul 25 03:30:07 2012] Offset between fit and detection position for source 27 = 0.871438 pixels
[Wed Jul 25 03:30:07 2012] Warning, changing simple spatial fit ID from 16 to 19
[Wed Jul 25 03:30:07 2012] 3037.085000 total counts/ 2656.990000 bgd. counts: snr = 7.373899
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.871438 pixels
  Position = (313.3, 371.5) = 5 35 35.36 -69 10 54.0
  Extent = 22.8 (16.8-31.3)", rotation angle = 0
  Source counts = 380.1 +/- 55.1
  Background counts = 2657.0
  Rate = 0.003 +/- 0.0005
[Wed Jul 25 03:30:07 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 03:30:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 03:30:07 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 03:30:07 2012] Source does appear to be extended
[Wed Jul 25 03:30:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 12:10:19 2012] XMMSAS src. selection expression = ellipse(27208.912000, 32272.004000, 1368.048039, 1368.048039, 0.000000, X, Y)
[Wed Jul 25 12:10:19 2012] Writing source region out to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src27_src.reg
[Wed Jul 25 12:10:19 2012] Extracting stamp from image fullrun_mos1_xmm0406840301_pi300-10000_cl_sm2.00.img.gz, (235, 293) - (392, 450)
[Wed Jul 25 12:10:19 2012] XMMSAS bgd. selection expression = annulus(27208.912000, 32272.004000, 2280.080066, 4560.160131, X, Y) && !ellipse(26067.012500, 33655.566400, 1548.048045, 870.056025, 42.080800, X, Y) && !ellipse(23126.066000, 29537.620000, 1089.016031, 1089.016031, 0.000000, X, Y) && !ellipse(25148.710000, 34109.316000, 1586.264046, 1586.264046, 0.000000, X, Y) && !ellipse(26239.547200, 31035.938000, 1382.744040, 762.880822, 159.946000, X, Y) && !ellipse(22767.942000, 33926.868000, 510.350415, 510.350415, 0.000000, X, Y) && !ellipse(26960.758000, 29351.473400, 1248.704036, 1248.704036, 0.000000, X, Y) && !ellipse(27776.296000, 31427.389800, 733.846421, 733.846421, 0.000000, X, Y) && !ellipse(27021.310000, 32524.489200, 1465.128042, 1465.128042, 0.000000, X, Y) && !ellipse(28045.358000, 31046.724000, 1419.920041, 1419.920041, 0.000000, X, Y) && !ellipse(24036.266388, 34485.335968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29642.575806, 27271.148773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21866.723801, 33262.854279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24649.740112, 31054.042480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28555.168732, 31200.504517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21918.997345, 30156.594788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22734.614000, 34062.630000, 592.324017, 592.324017, 0.000000, X, Y) && !ellipse(23358.309967, 33305.743622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23811.342926, 29864.323853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31138.952972, 29498.978546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29744.927185, 25980.647888, 1740.000000, 1740.000000, 0.000000, X, Y)
[Wed Jul 25 12:10:19 2012] Writing fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src27.gif
[Wed Jul 25 12:34:24 2012] Mean detx,y = (3052.03, -5812.24) 
[Wed Jul 25 12:34:25 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 12:35:27 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 12:35:27 2012] Setting source spectrum file to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Jul 25 12:35:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Wed Jul 25 18:52:32 2012] Updating aperture counts using extracted products
[Wed Jul 25 18:52:32 2012] Error reading totcts from fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Jul 25 18:52:34 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:52:34 2012] Using photon index=1.80, rate=0.00346, arf fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src27.arf
[Wed Jul 25 18:52:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:52:34 2012] Updating source flux to 4.4e-14
[Wed Jul 25 18:52:43 2012] Flag c found in src. 27 procflags, skipping spectral fitting