[Tue Jul 24 00:21:02 2012] Detection parameters:
  Position = (269.0, 383.4) = 5 36 11.46 -69 10 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.2 +/- 19.5
  Background counts = 125.4
  Rate = 0.001 +/- 0.0003

[Tue Jul 24 00:21:03 2012] Off-axis axis estimate = 6.52'
[Tue Jul 24 06:25:26 2012] Using EEF radius (= 9.69 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 06:25:26 2012] Initial guess for spatial extent in simple fitting = 9.69"
[Tue Jul 24 06:25:26 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.009
[Tue Jul 24 06:25:26 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 9.69"
[Tue Jul 24 08:58:00 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src44.ximg exists
[Tue Jul 24 08:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src44.csv
[Tue Jul 24 08:58:00 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src44_1.ximg exists
[Tue Jul 24 08:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src44.csv
[Tue Jul 24 08:58:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 08:58:02 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Tue Jul 24 08:58:02 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Tue Jul 24 08:58:02 2012] Fit fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Tue Jul 24 13:37:53 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 10.110616 pixels away
[Tue Jul 24 13:37:53 2012] Source 24 is offset by 6.760712 and -7.161246 pixels which is larger than
2 X fitted extent = 2.863113 x 2.863113, not incorporating fit results
[Tue Jul 24 13:37:53 2012] Warning, spatial fit 44 centroid is now closest to src. 22
[Tue Jul 24 13:37:53 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 13:37:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 13:37:53 2012] Assessing source extent using major
[Tue Jul 24 13:37:53 2012] Source does appear to be extended
[Tue Jul 24 13:37:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 19:25:48 2012] Using EEF radius (= 9.69 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 19:25:48 2012] Initial guess for spatial extent in simple fitting = 9.69"
[Tue Jul 24 19:25:48 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.009
[Tue Jul 24 19:25:48 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 9.69"
[Tue Jul 24 21:44:26 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src39.ximg exists
[Tue Jul 24 21:44:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src39.csv
[Tue Jul 24 21:44:26 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src39_1.ximg exists
[Tue Jul 24 21:44:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src39.csv
[Tue Jul 24 21:44:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 21:44:27 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Tue Jul 24 21:44:27 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Tue Jul 24 21:44:27 2012] Fit fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Wed Jul 25 03:30:07 2012] Warning, spatial fit 39 centroid is now closest to src. 22
[Wed Jul 25 03:30:07 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 03:30:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 03:30:07 2012] Assessing source extent using major
[Wed Jul 25 03:30:07 2012] Source does appear to be extended
[Wed Jul 25 03:30:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 12:10:20 2012] XMMSAS src. selection expression = ellipse(23358.309967, 33305.743622, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 12:10:20 2012] Writing source region out to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src24_src.reg
[Wed Jul 25 12:10:20 2012] Extracting stamp from image fullrun_mos1_xmm0406840301_pi300-10000_cl_sm2.00.img.gz, (232, 346) - (307, 421)
[Wed Jul 25 12:10:20 2012] XMMSAS bgd. selection expression = annulus(23358.309967, 33305.743622, 1087.500000, 2175.000000, X, Y) && !ellipse(26067.012500, 33655.566400, 1548.048045, 870.056025, 42.080800, X, Y) && !ellipse(25148.710000, 34109.316000, 1586.264046, 1586.264046, 0.000000, X, Y) && !ellipse(26239.547200, 31035.938000, 1382.744040, 762.880822, 159.946000, X, Y) && !ellipse(22767.942000, 33926.868000, 510.350415, 510.350415, 0.000000, X, Y) && !ellipse(20673.452000, 32275.256000, 1576.552045, 1576.552045, 0.000000, X, Y) && !ellipse(27208.912000, 32272.004000, 1824.064052, 1824.064052, 0.000000, X, Y) && !ellipse(20487.161400, 31897.295200, 1328.240038, 1328.240038, 0.000000, X, Y) && !ellipse(24036.266388, 34485.335968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21866.723801, 33262.854279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24649.740112, 31054.042480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22734.614000, 34062.630000, 592.324017, 592.324017, 0.000000, X, Y) && !ellipse(20454.516373, 30495.541138, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 12:10:20 2012] Writing fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src24.gif
[Wed Jul 25 12:44:50 2012] Mean detx,y = (595.75, -9004.38) 
[Wed Jul 25 12:44:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 12:45:12 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 12:45:12 2012] Setting source spectrum file to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Wed Jul 25 12:45:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Wed Jul 25 14:29:50 2012] Not generating rmf since there are only 90 counts
[Wed Jul 25 14:29:50 2012] rmf not generated due to insufficient counts
[Wed Jul 25 18:52:33 2012] Updating aperture counts using extracted products
[Wed Jul 25 18:52:33 2012] Error reading totcts from fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Wed Jul 25 18:52:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:52:35 2012] Using photon index=1.80, rate=0.00146, arf fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src24.arf
[Wed Jul 25 18:52:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:52:35 2012] Updating source flux to 2.6e-14
[Wed Jul 25 18:52:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting