[Tue Jul 24 00:21:02 2012] Detection parameters:
  Position = (213.1, 335.8) = 5 36 57.26 -69 13 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 736.7 +/- 35.5
  Background counts = 97.0
  Rate = 0.01 +/- 0.0006

[Tue Jul 24 00:21:03 2012] Off-axis axis estimate = 6.75'
[Tue Jul 24 06:25:26 2012] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 06:25:26 2012] Initial guess for spatial extent in simple fitting = 9.81"
[Tue Jul 24 06:25:26 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.186
[Tue Jul 24 06:25:26 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.81"
[Tue Jul 24 08:57:59 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jul 24 08:57:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src3.csv
[Tue Jul 24 08:57:59 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jul 24 08:57:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src3.csv
[Tue Jul 24 08:57:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 08:58:01 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jul 24 08:58:01 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jul 24 08:58:01 2012] Fit fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jul 24 13:37:53 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.871763 pixels away
[Tue Jul 24 13:37:53 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 13:37:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 13:37:53 2012] Assessing source extent using major
[Tue Jul 24 13:37:53 2012] Source does appear to be extended
[Tue Jul 24 13:37:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 19:25:48 2012] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 19:25:48 2012] Initial guess for spatial extent in simple fitting = 9.81"
[Tue Jul 24 19:25:48 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.186
[Tue Jul 24 19:25:48 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.81"
[Tue Jul 24 21:44:25 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jul 24 21:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src3.csv
[Tue Jul 24 21:44:25 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jul 24 21:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src3.csv
[Tue Jul 24 21:44:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 21:44:26 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jul 24 21:44:26 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jul 24 21:44:26 2012] Fit fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jul 25 03:30:07 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.871763 pixels away
[Wed Jul 25 03:30:07 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 03:30:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 03:30:07 2012] Assessing source extent using major
[Wed Jul 25 03:30:07 2012] Source does appear to be extended
[Wed Jul 25 03:30:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 12:10:19 2012] XMMSAS src. selection expression = ellipse(18491.075745, 29167.758331, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 12:10:19 2012] Writing source region out to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src2_src.reg
[Wed Jul 25 12:10:19 2012] Extracting stamp from image fullrun_mos1_xmm0406840301_pi300-10000_cl_sm2.00.img.gz, (176, 298) - (251, 373)
[Wed Jul 25 12:10:19 2012] XMMSAS bgd. selection expression = annulus(18491.075745, 29167.758331, 1087.500000, 2175.000000, X, Y) && !ellipse(20371.059800, 31628.227200, 664.118419, 664.118419, 0.000000, X, Y) && !ellipse(20673.452000, 32275.256000, 1576.552045, 1576.552045, 0.000000, X, Y) && !ellipse(20487.161400, 31897.295200, 1328.240038, 1328.240038, 0.000000, X, Y) && !ellipse(16566.431732, 29366.431519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20454.516373, 30495.541138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17381.099594, 30063.456360, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 12:10:19 2012] Writing fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src2.gif
[Wed Jul 25 12:18:20 2012] Mean detx,y = (-5782.44, -8177.30) 
[Wed Jul 25 12:18:22 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 12:18:36 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 12:18:36 2012] Setting source spectrum file to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 25 12:18:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jul 25 13:03:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 25 13:03:02 2012] rmf not generated due to insufficient counts
[Wed Jul 25 18:52:32 2012] Updating aperture counts using extracted products
[Wed Jul 25 18:52:32 2012] Error reading totcts from fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 25 18:52:33 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:52:33 2012] Using photon index=1.80, rate=0.0125, arf fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src2.arf
[Wed Jul 25 18:52:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:52:34 2012] Updating source flux to 2.3e-13
[Wed Jul 25 18:52:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting