[Tue Jul 24 00:21:02 2012] Detection parameters:
  Position = (260.5, 139.2) = 5 36 18.82 -69 27 44.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 190.0 +/- 22.5
  Background counts = 83.8
  Rate = 0.002 +/- 0.0002

[Tue Jul 24 00:21:03 2012] Off-axis axis estimate = 11.87'
[Tue Jul 24 06:25:26 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 06:25:26 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Tue Jul 24 06:25:26 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.940
[Tue Jul 24 06:25:26 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 12.36"
[Tue Jul 24 08:58:00 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src31.ximg exists
[Tue Jul 24 08:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src31.csv
[Tue Jul 24 08:58:00 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue Jul 24 08:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src31.csv
[Tue Jul 24 08:58:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 08:58:02 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue Jul 24 08:58:02 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Jul 24 08:58:02 2012] Fit fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Tue Jul 24 13:37:53 2012] Warning, spatial fit 31 centroid is now closest to src. 18
[Tue Jul 24 13:37:53 2012] Source 17 is offset by -4.084707 and -6.229883 pixels which is larger than
2 X fitted extent = 1.451641 x 1.451641, not incorporating fit results
[Tue Jul 24 13:37:53 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 13:37:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 13:37:53 2012] Assessing source extent using major
[Tue Jul 24 13:37:53 2012] Source does appear to be extended
[Tue Jul 24 13:37:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 19:25:48 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 19:25:48 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Tue Jul 24 19:25:48 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.940
[Tue Jul 24 19:25:48 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 12.36"
[Tue Jul 24 21:44:25 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src27.ximg exists
[Tue Jul 24 21:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src27.csv
[Tue Jul 24 21:44:25 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src27_1.ximg exists
[Tue Jul 24 21:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src27.csv
[Tue Jul 24 21:44:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 21:44:26 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Tue Jul 24 21:44:26 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Tue Jul 24 21:44:26 2012] Fit fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Wed Jul 25 03:30:07 2012] Warning, spatial fit 27 centroid is now closest to src. 62
[Wed Jul 25 03:30:07 2012] Source 17 is offset by -3.343466 and -6.971424 pixels which is larger than
2 X fitted extent = 1.359421 x 1.359421, not incorporating fit results
[Wed Jul 25 03:30:07 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 03:30:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 03:30:07 2012] Assessing source extent using major
[Wed Jul 25 03:30:07 2012] Source does appear to be extended
[Wed Jul 25 03:30:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 12:10:19 2012] XMMSAS src. selection expression = ellipse(22617.474487, 12058.156143, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 12:10:19 2012] Writing source region out to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src17_src.reg
[Wed Jul 25 12:10:19 2012] Extracting stamp from image fullrun_mos1_xmm0406840301_pi300-10000_cl_sm2.00.img.gz, (223, 102) - (298, 177)
[Wed Jul 25 12:10:19 2012] XMMSAS bgd. selection expression = annulus(22617.474487, 12058.156143, 1087.500000, 2175.000000, X, Y) && !ellipse(22906.854095, 10478.697136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21782.138550, 11610.127914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20990.625198, 12887.179749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22969.480927, 10047.598038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.146271, 9523.108948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24151.473419, 11379.176208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21996.852097, 13573.105240, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 12:10:19 2012] Writing fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src17.gif
[Wed Jul 25 12:40:49 2012] Mean detx,y = (-11776.34, 8302.47) 
[Wed Jul 25 12:40:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 12:40:59 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 12:40:59 2012] Setting source spectrum file to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jul 25 12:40:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Jul 25 14:24:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 25 14:24:40 2012] rmf not generated due to insufficient counts
[Wed Jul 25 18:52:32 2012] Updating aperture counts using extracted products
[Wed Jul 25 18:52:32 2012] Error reading totcts from fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jul 25 18:52:34 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:52:34 2012] Using photon index=1.80, rate=0.00171, arf fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src17.arf
[Wed Jul 25 18:52:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:52:35 2012] Updating source flux to 3.8e-14
[Wed Jul 25 18:52:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting