[Tue Jul 24 00:21:02 2012] Detection parameters:
  Position = (286.9, 393.9) = 5 35 56.86 -69 9 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 321.5 +/- 27.7
  Background counts = 115.6
  Rate = 0.005 +/- 0.0004

[Tue Jul 24 00:21:03 2012] Off-axis axis estimate = 6.97'
[Tue Jul 24 06:25:26 2012] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 06:25:26 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Tue Jul 24 06:25:26 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.165
[Tue Jul 24 06:25:26 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.91"
[Tue Jul 24 08:58:00 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src7.ximg exists
[Tue Jul 24 08:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src7.csv
[Tue Jul 24 08:58:00 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Jul 24 08:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src7.csv
[Tue Jul 24 08:58:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 08:58:01 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Jul 24 08:58:01 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Jul 24 08:58:01 2012] Fit fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Jul 24 13:37:53 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.735024 pixels away
[Tue Jul 24 13:37:53 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 13:37:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 13:37:53 2012] Assessing source extent using major
[Tue Jul 24 13:37:53 2012] Source does appear to be extended
[Tue Jul 24 13:37:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 19:25:48 2012] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 19:25:48 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Tue Jul 24 19:25:48 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.165
[Tue Jul 24 19:25:48 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 9.91"
[Tue Jul 24 21:44:25 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jul 24 21:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src7.csv
[Tue Jul 24 21:44:25 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jul 24 21:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src7.csv
[Tue Jul 24 21:44:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 21:44:26 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jul 24 21:44:26 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jul 24 21:44:26 2012] Fit fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Jul 25 03:30:07 2012] Spatial fit model total counts = 2543.620000, observed total counts = 3973.000000
[Wed Jul 25 03:30:07 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 25 03:30:07 2012] Spatial fit model total counts = 2015.270000, observed total counts = 2012.000000
[Wed Jul 25 03:30:07 2012] Offset between fit and detection position for source 10 = 2.976441 pixels
[Wed Jul 25 03:30:07 2012] 1965.157000 total counts/ 1165.340000 bgd. counts: snr = 23.429569
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.976441 pixels
  Position = (289.6, 392.6) = 5 35 54.67 -69 9 22.2
  Extent = 19.8 (19.8-39.7)", rotation angle = 0
  Source counts = 799.8 +/- 44.3
  Background counts = 1165.3
  Rate = 0.007 +/- 0.0004
[Wed Jul 25 03:30:07 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 03:30:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 03:30:07 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 03:30:07 2012] Source does appear to be extended
[Wed Jul 25 03:30:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 03:30:07 2012] Source is confused with source 5
[Wed Jul 25 12:10:19 2012] XMMSAS src. selection expression = ellipse(25148.710000, 34109.316000, 1189.698034, 1189.698034, 0.000000, X, Y)
[Wed Jul 25 12:10:19 2012] Writing source region out to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src10_src.reg
[Wed Jul 25 12:10:19 2012] Extracting stamp from image fullrun_mos1_xmm0406840301_pi300-10000_cl_sm2.00.img.gz, (221, 324) - (358, 461)
[Wed Jul 25 12:10:19 2012] XMMSAS bgd. selection expression = annulus(25148.710000, 34109.316000, 1982.830057, 3965.660114, X, Y) && !ellipse(26067.012500, 33655.566400, 1548.048045, 870.056025, 42.080800, X, Y) && !ellipse(23126.066000, 29537.620000, 1089.016031, 1089.016031, 0.000000, X, Y) && !ellipse(26239.547200, 31035.938000, 1382.744040, 762.880822, 159.946000, X, Y) && !ellipse(22767.942000, 33926.868000, 510.350415, 510.350415, 0.000000, X, Y) && !ellipse(26960.758000, 29351.473400, 1248.704036, 1248.704036, 0.000000, X, Y) && !ellipse(20673.452000, 32275.256000, 1576.552045, 1576.552045, 0.000000, X, Y) && !ellipse(27208.912000, 32272.004000, 1824.064052, 1824.064052, 0.000000, X, Y) && !ellipse(20487.161400, 31897.295200, 1328.240038, 1328.240038, 0.000000, X, Y) && !ellipse(27776.296000, 31427.389800, 733.846421, 733.846421, 0.000000, X, Y) && !ellipse(27021.310000, 32524.489200, 1465.128042, 1465.128042, 0.000000, X, Y) && !ellipse(28045.358000, 31046.724000, 1419.920041, 1419.920041, 0.000000, X, Y) && !ellipse(24036.266388, 34485.335968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21866.723801, 33262.854279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24649.740112, 31054.042480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28555.168732, 31200.504517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21918.997345, 30156.594788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22734.614000, 34062.630000, 592.324017, 592.324017, 0.000000, X, Y) && !ellipse(23358.309967, 33305.743622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23811.342926, 29864.323853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20454.516373, 30495.541138, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 12:10:19 2012] Writing fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src10.gif
[Wed Jul 25 12:29:59 2012] Mean detx,y = (2510.25, -8449.23) 
[Wed Jul 25 12:30:00 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 12:30:32 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 12:30:32 2012] Setting source spectrum file to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jul 25 12:30:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Jul 25 18:52:32 2012] Updating aperture counts using extracted products
[Wed Jul 25 18:52:32 2012] Error reading totcts from fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jul 25 18:52:34 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:52:34 2012] Using photon index=1.80, rate=0.00727, arf fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src10.arf
[Wed Jul 25 18:52:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:52:34 2012] Updating source flux to 1.1e-13
[Wed Jul 25 18:52:43 2012] Flag p found in src. 10 procflags, skipping spectral fitting
[Wed Jul 25 18:52:43 2012] Flag c found in src. 10 procflags, skipping spectral fitting