[Tue Jul 24 00:21:02 2012] Detection parameters:
  Position = (322.3, 298.2) = 5 35 27.91 -69 16 12.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84175.1 +/- 343.8
  Background counts = 149.6
  Rate = 0.8 +/- 0.003

[Tue Jul 24 00:21:03 2012] Off-axis axis estimate = 1.73'
[Tue Jul 24 06:25:26 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 06:25:26 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Jul 24 06:25:26 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Tue Jul 24 06:25:26 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue Jul 24 08:57:59 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 24 08:57:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src1.csv
[Tue Jul 24 08:57:59 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 24 08:57:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src1.csv
[Tue Jul 24 08:57:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 08:58:01 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 24 08:58:01 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 24 08:58:01 2012] Fit fullrun_mos1_xmm0406840301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul 24 13:37:53 2012] Spatial fit model total counts = 74357.100000, observed total counts = 74357.000000
[Tue Jul 24 13:37:53 2012] Offset between fit and detection position for source 1 = 0.172747 pixels
[Tue Jul 24 13:37:53 2012] 74500.400000 total counts/ 16665.000000 bgd. counts: snr = 448.013483
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.172747 pixels
  Position = (322.2, 298.3) = 5 35 27.99 -69 16 12.4
  Extent = 5.6 (5.5-5.6)", rotation angle = 0
  Source counts = 57835.4 +/- 272.9
  Background counts = 16665.0
  Rate = 0.5 +/- 0.002
[Tue Jul 24 13:37:53 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 13:37:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 13:37:53 2012] Assessing source extent using major axis lower bound
[Tue Jul 24 13:37:53 2012] Source does appear to be extended
[Tue Jul 24 13:37:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 19:25:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 24 19:25:48 2012] Initial guess for spatial extent in simple fitting = 5.58"
[Tue Jul 24 19:25:48 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.943
[Tue Jul 24 19:25:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.58"
[Tue Jul 24 21:44:25 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul 24 21:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src1.csv
[Tue Jul 24 21:44:25 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul 24 21:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src1.csv
[Tue Jul 24 21:44:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 21:44:26 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul 24 21:44:26 2012] fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul 24 21:44:26 2012] Fit fullrun_mos1_xmm0406840301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 25 03:30:07 2012] Spatial fit model total counts = 74357.000000, observed total counts = 74357.000000
[Wed Jul 25 03:30:07 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Wed Jul 25 03:30:07 2012] 74500.400000 total counts/ 16665.000000 bgd. counts: snr = 448.013483
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (322.2, 298.3) = 5 35 27.99 -69 16 12.4
  Extent = 5.6 (5.5-5.6)", rotation angle = 0
  Source counts = 57835.4 +/- 272.9
  Background counts = 16665.0
  Rate = 0.5 +/- 0.002
[Wed Jul 25 03:30:07 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 03:30:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 03:30:07 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 03:30:07 2012] Source does appear to be extended
[Wed Jul 25 03:30:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 12:10:18 2012] Counts = 57835.400000, rescaling region sizes by 3.000000
[Wed Jul 25 12:10:18 2012] XMMSAS src. selection expression = ellipse(27985.677000, 25905.046800, 1005.102029, 1005.102029, 0.000000, X, Y)
[Wed Jul 25 12:10:18 2012] Writing source region out to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 25 12:10:18 2012] Extracting stamp from image fullrun_mos1_xmm0406840301_pi300-10000_cl_sm2.00.img.gz, (264, 241) - (380, 356)
[Wed Jul 25 12:10:18 2012] XMMSAS bgd. selection expression = annulus(27985.677000, 25905.046800, 5025.510145, 10051.020289, X, Y) && !ellipse(18491.075745, 29167.758331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26067.012500, 33655.566400, 1548.048045, 870.056025, 42.080800, X, Y) && !ellipse(26237.683800, 23632.671400, 1182.984034, 1182.984034, 0.000000, X, Y) && !ellipse(23126.066000, 29537.620000, 1089.016031, 1089.016031, 0.000000, X, Y) && !ellipse(25148.710000, 34109.316000, 1586.264046, 1586.264046, 0.000000, X, Y) && !ellipse(26239.547200, 31035.938000, 1382.744040, 762.880822, 159.946000, X, Y) && !ellipse(22767.942000, 33926.868000, 510.350415, 510.350415, 0.000000, X, Y) && !ellipse(20371.059800, 31628.227200, 664.118419, 664.118419, 0.000000, X, Y) && !ellipse(26960.758000, 29351.473400, 1248.704036, 1248.704036, 0.000000, X, Y) && !ellipse(20673.452000, 32275.256000, 1576.552045, 1576.552045, 0.000000, X, Y) && !ellipse(32344.275600, 17455.942600, 478.420814, 478.420814, 0.000000, X, Y) && !ellipse(27208.912000, 32272.004000, 1824.064052, 1824.064052, 0.000000, X, Y) && !ellipse(34543.704132, 23821.479828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20487.161400, 31897.295200, 1328.240038, 1328.240038, 0.000000, X, Y) && !ellipse(27776.296000, 31427.389800, 733.846421, 733.846421, 0.000000, X, Y) && !ellipse(27021.310000, 32524.489200, 1465.128042, 1465.128042, 0.000000, X, Y) && !ellipse(26285.928467, 15561.827057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28045.358000, 31046.724000, 1419.920041, 1419.920041, 0.000000, X, Y) && !ellipse(30693.683319, 20012.681000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25937.801025, 24481.286469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24036.266388, 34485.335968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29642.575806, 27271.148773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21866.723801, 33262.854279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24649.740112, 31054.042480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28555.168732, 31200.504517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21918.997345, 30156.594788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22734.614000, 34062.630000, 592.324017, 592.324017, 0.000000, X, Y) && !ellipse(22125.087880, 26349.815400, 657.420819, 657.420819, 0.000000, X, Y) && !ellipse(23358.309967, 33305.743622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28563.811800, 17081.530680, 528.136815, 528.136815, 0.000000, X, Y) && !ellipse(23811.342926, 29864.323853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20454.516373, 30495.541138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31138.952972, 29498.978546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17381.099594, 30063.456360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29744.927185, 25980.647888, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(22837.623000, 26256.621200, 1225.536035, 1225.536035, 0.000000, X, Y) && !ellipse(23629.229220, 26046.183600, 1182.264034, 1182.264034, 0.000000, X, Y)
[Wed Jul 25 12:10:18 2012] Writing fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src1.gif
[Wed Jul 25 12:10:37 2012] Mean detx,y = (313.43, -209.87) 
[Wed Jul 25 12:10:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 12:14:00 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 12:14:00 2012] Setting source spectrum file to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 25 12:14:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 25 18:52:32 2012] Updating aperture counts using extracted products
[Wed Jul 25 18:52:32 2012] Error reading totcts from fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 25 18:52:33 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:52:33 2012] Using photon index=1.80, rate=0.526, arf fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src1.arf
[Wed Jul 25 18:52:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:52:33 2012] Updating source flux to 4.9e-12
[Wed Jul 25 18:58:01 2012] Reading fit data from xmm0406840301/analysis//spectral/fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul 25 18:58:01 2012] Spectral fit parameter nH value = 4.54332e+21
[Wed Jul 25 18:58:01 2012] Spectral fit parameter PhoIndex value = 4.86034
[Wed Jul 25 18:58:01 2012] Failed to get F(0.3-8.0) from xmm0406840301/analysis//spectral/fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 25 18:58:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 18:58:01 2012] Using Nh = 4.5e+21, photon index=4.86, rate=0.526, arf fullrun_mos1_xmm0406840301_pi300-10000_pass1_cl_src1.arf
[Wed Jul 25 18:58:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 18:58:01 2012] Updating source flux to 3e-12