[Wed Jun 13 07:15:55 2012] Detection parameters:
  Position = (312.6, 318.8) = 15 18 6.36 42 44 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 232.2 +/- 21.5
  Background counts = 53.6
  Rate = 0.01 +/- 0.0009

[Wed Jun 13 07:15:55 2012] Off-axis axis estimate = 1.80'
[Wed Jun 13 07:37:22 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 07:37:22 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Wed Jun 13 07:37:22 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.048
[Wed Jun 13 07:37:22 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.33"
[Wed Jun 13 07:44:09 2012] fullrun_mos2_xmm0203390601_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jun 13 07:44:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203390601_pi300-10000_cl_pass0_src3.csv
[Wed Jun 13 07:44:09 2012] fullrun_mos2_xmm0203390601_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jun 13 07:44:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203390601_pi300-10000_cl_pass0_src3.csv
[Wed Jun 13 07:44:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203390601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203390601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:44:09 2012] fullrun_mos2_xmm0203390601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jun 13 07:44:09 2012] fullrun_mos2_xmm0203390601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jun 13 07:44:09 2012] Fit fullrun_mos2_xmm0203390601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jun 13 07:44:15 2012] Spatial fit model total counts = 291.019000, observed total counts = 279.000000
[Wed Jun 13 07:44:15 2012] Offset between fit and detection position for source 3 = 0.171515 pixels
[Wed Jun 13 07:44:15 2012] 292.125400 total counts/ 207.880000 bgd. counts: snr = 5.843053
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.171515 pixels
  Position = (312.5, 318.6) = 15 18 6.40 42 44 44.6
  Extent = 5.2 (4.0-6.4)", rotation angle = 0
  Source counts = 84.2 +/- 17.1
  Background counts = 207.9
  Rate = 0.005 +/- 0.001
[Wed Jun 13 07:44:15 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 07:44:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 07:44:15 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 07:44:15 2012] Source does appear to be extended
[Wed Jun 13 07:44:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 08:04:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 08:04:43 2012] Initial guess for spatial extent in simple fitting = 5.15"
[Wed Jun 13 08:04:43 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.793
[Wed Jun 13 08:04:43 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.15"
[Wed Jun 13 08:11:16 2012] fullrun_mos2_xmm0203390601_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jun 13 08:11:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203390601_pi300-10000_cl_pass1_src3.csv
[Wed Jun 13 08:11:16 2012] fullrun_mos2_xmm0203390601_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jun 13 08:11:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203390601_pi300-10000_cl_pass1_src3.csv
[Wed Jun 13 08:11:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203390601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203390601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 08:11:16 2012] fullrun_mos2_xmm0203390601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jun 13 08:11:16 2012] fullrun_mos2_xmm0203390601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jun 13 08:11:16 2012] Fit fullrun_mos2_xmm0203390601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jun 13 08:11:20 2012] Spatial fit model total counts = 287.229000, observed total counts = 277.000000
[Wed Jun 13 08:11:20 2012] Offset between fit and detection position for source 3 = 0.006961 pixels
[Wed Jun 13 08:11:20 2012] 288.101700 total counts/ 202.179000 bgd. counts: snr = 6.042823
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.006961 pixels
  Position = (312.5, 318.6) = 15 18 6.40 42 44 44.6
  Extent = 5.3 (4.0-6.5)", rotation angle = 0
  Source counts = 85.9 +/- 17.0
  Background counts = 202.2
  Rate = 0.006 +/- 0.001
[Wed Jun 13 08:11:20 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 08:11:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 08:11:20 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 08:11:20 2012] Source does appear to be extended
[Wed Jun 13 08:11:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 08:28:21 2012] XMMSAS src. selection expression = ellipse(27139.385200, 27673.632600, 316.310409, 316.310409, 0.000000, X, Y)
[Wed Jun 13 08:28:21 2012] Writing source region out to fullrun_mos2_xmm0203390601_pi300-10000_pass1_cl_src3_src.reg
[Wed Jun 13 08:28:21 2012] Extracting stamp from image fullrun_mos2_xmm0203390601_pi300-10000_cl_sm2.00.img.gz, (294, 300) - (331, 337)
[Wed Jun 13 08:28:21 2012] XMMSAS bgd. selection expression = annulus(27139.385200, 27673.632600, 527.184015, 1054.368030, X, Y)
[Wed Jun 13 08:28:21 2012] Writing fullrun_mos2_xmm0203390601_pi300-10000_pass1_cl_src3.gif
[Wed Jun 13 08:28:43 2012] Mean detx,y = (121.81, 217.57) 
[Wed Jun 13 08:28:44 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 08:28:50 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 08:28:50 2012] Setting source spectrum file to fullrun_mos2_xmm0203390601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 13 08:28:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203390601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jun 13 08:36:35 2012] Not generating rmf since there are only 85 counts
[Wed Jun 13 08:36:35 2012] rmf not generated due to insufficient counts
[Wed Jun 13 08:37:26 2012] Updating aperture counts using extracted products
[Wed Jun 13 08:37:26 2012] Error reading totcts from fullrun_mos2_xmm0203390601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 13 08:37:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 08:37:26 2012] Using photon index=1.80, rate=0.0055, arf fullrun_mos2_xmm0203390601_pi300-10000_pass1_cl_src3.arf
[Wed Jun 13 08:37:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 08:37:26 2012] Updating source flux to 6.4e-14
[Wed Jun 13 08:37:35 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting