[Wed May 29 01:12:05 2013] Detection parameters:
  Position = (289.0, 162.3) = 11 3 59.30 40 39 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.2 +/- 7.7
  Background counts = 6.9
  Rate = 0.002 +/- 0.0005

[Wed May 29 01:12:06 2013] Off-axis axis estimate = 9.89'
[Wed May 29 01:55:26 2013] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Wed May 29 01:55:26 2013] Initial guess for spatial extent in simple fitting = 11.38"
[Wed May 29 01:55:26 2013] source mask rpix=2.6, npix_max = 38, mask sum = 32, frac = 0.824
[Wed May 29 01:55:26 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 11.38"
[Wed May 29 02:17:02 2013] fullrun_mos1_xmm0203390501_pi300-10000_cl_pass0_src9.ximg exists
[Wed May 29 02:17:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203390501_pi300-10000_cl_pass0_src9.csv
[Wed May 29 02:17:02 2013] fullrun_mos1_xmm0203390501_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed May 29 02:17:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203390501_pi300-10000_cl_pass0_src9.csv
[Wed May 29 02:17:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203390501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203390501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:17:02 2013] fullrun_mos1_xmm0203390501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed May 29 02:17:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203390501_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed May 29 02:17:02 2013] fullrun_mos1_xmm0203390501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed May 29 02:17:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203390501_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed May 29 02:17:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203390501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203390501_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:29:40 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 15.280559 pixels away
[Wed May 29 02:29:41 2013] Vigneting correction estimate = 1.000000
[Wed May 29 02:29:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 02:29:41 2013] Assessing source extent using major
[Wed May 29 02:29:41 2013] Source does appear to be extended
[Wed May 29 02:29:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 03:03:58 2013] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Wed May 29 03:03:58 2013] Initial guess for spatial extent in simple fitting = 11.38"
[Wed May 29 03:03:58 2013] source mask rpix=2.6, npix_max = 38, mask sum = 32, frac = 0.824
[Wed May 29 03:03:58 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 11.38"
[Wed May 29 03:21:09 2013] fullrun_mos1_xmm0203390501_pi300-10000_cl_pass1_src9.ximg exists
[Wed May 29 03:21:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203390501_pi300-10000_cl_pass1_src9.csv
[Wed May 29 03:21:09 2013] fullrun_mos1_xmm0203390501_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed May 29 03:21:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203390501_pi300-10000_cl_pass1_src9.csv
[Wed May 29 03:21:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203390501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203390501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 03:21:09 2013] fullrun_mos1_xmm0203390501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed May 29 03:21:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203390501_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed May 29 03:21:09 2013] fullrun_mos1_xmm0203390501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed May 29 03:21:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203390501_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed May 29 03:21:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203390501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203390501_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 03:33:24 2013] Spatial fit model total counts = 80.936500, observed total counts = 69.000000
[Wed May 29 03:33:24 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 03:33:24 2013] Vigneting correction estimate = 1.000000
[Wed May 29 03:33:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 03:33:24 2013] Assessing source extent using major
[Wed May 29 03:33:24 2013] Source does appear to be extended
[Wed May 29 03:33:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 03:58:58 2013] XMMSAS src. selection expression = ellipse(25097.242645, 14070.887390, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 03:58:58 2013] Writing source region out to fullrun_mos1_xmm0203390501_pi300-10000_pass1_cl_src7_src.reg
[Wed May 29 03:58:58 2013] Extracting stamp from image fullrun_mos1_xmm0203390501_pi300-10000_cl_sm2.00.img.gz, (252, 125) - (327, 200)
[Wed May 29 03:58:58 2013] XMMSAS bgd. selection expression = annulus(25097.242645, 14070.887390, 1087.500000, 2175.000000, X, Y)
[Wed May 29 03:58:58 2013] Writing fullrun_mos1_xmm0203390501_pi300-10000_pass1_cl_src7.gif
[Wed May 29 04:01:42 2013] Mean detx,y = (-12201.04, -6368.28) 
[Wed May 29 04:01:45 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 04:02:09 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 04:02:09 2013] Setting source spectrum file to fullrun_mos1_xmm0203390501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed May 29 04:02:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0203390501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed May 29 04:03:40 2013] Not generating rmf since there are only 31 counts
[Wed May 29 04:03:40 2013] rmf not generated due to insufficient counts
[Wed May 29 04:08:46 2013] Updating aperture counts using extracted products
[Wed May 29 04:08:46 2013] Total counts from fullrun_mos1_xmm0203390501_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 53.00
[Wed May 29 04:08:47 2013] Total counts from fullrun_mos1_xmm0203390501_pi300-10000_pass1_cl_src7_bgd.pi.gz = 225.00
[Wed May 29 04:08:47 2013] Got source and background scale factors 1071014.000000, 9473536.000000
[Wed May 29 04:08:47 2013] User source parameters:
  Position = (289.0, 162.3) = 11 3 59.30 40 39 24.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 27.6 +/- 8.3
  Background aperture counts = 25.4
  Rate = 0.002 +/- 0.0006

[Wed May 29 04:08:47 2013] Updating counts from extracted products
[Wed May 29 04:08:47 2013] Set source signif. to 27.56/5.04 = 5.47
[Wed May 29 04:08:47 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 04:08:47 2013] Using photon index=1.80, rate=0.00205, arf fullrun_mos1_xmm0203390501_pi300-10000_pass1_cl_src7.arf
[Wed May 29 04:08:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 04:08:47 2013] Updating source flux to 5.5e-14
[Wed May 29 04:08:50 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 04:08:51 2013] xmm0203390501/analysis//spectral/fullrun_mos1_xmm0203390501_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete