[Thu Jul  5 18:05:09 2012] Detection parameters:
  Position = (399.6, 330.2) = 1 44 5.63 17 7 20.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.9 +/- 16.8
  Background counts = 72.3
  Rate = 0.009 +/- 0.001

[Thu Jul  5 18:05:09 2012] Off-axis axis estimate = 7.69'
[Thu Jul  5 18:29:53 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 18:29:53 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Thu Jul  5 18:29:53 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.916
[Thu Jul  5 18:29:53 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.27"
[Thu Jul  5 18:36:55 2012] fullrun_mos2_xmm0203390201_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jul  5 18:36:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203390201_pi300-10000_cl_pass0_src2.csv
[Thu Jul  5 18:36:55 2012] fullrun_mos2_xmm0203390201_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jul  5 18:36:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203390201_pi300-10000_cl_pass0_src2.csv
[Thu Jul  5 18:36:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203390201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203390201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 18:36:55 2012] fullrun_mos2_xmm0203390201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jul  5 18:36:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203390201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jul  5 18:36:55 2012] fullrun_mos2_xmm0203390201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jul  5 18:36:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203390201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jul  5 18:36:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203390201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203390201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 18:37:00 2012] Spatial fit model total counts = 175.373000, observed total counts = 159.000000
[Thu Jul  5 18:37:00 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul  5 18:37:00 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 18:37:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 18:37:00 2012] Assessing source extent using major
[Thu Jul  5 18:37:00 2012] Source does appear to be extended
[Thu Jul  5 18:37:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 18:58:18 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 18:58:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul  5 18:58:18 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Thu Jul  5 18:58:18 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.916
[Thu Jul  5 18:58:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.27"
[Thu Jul  5 19:04:12 2012] fullrun_mos2_xmm0203390201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul  5 19:04:12 2012] fullrun_mos2_xmm0203390201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul  5 19:04:12 2012] Fit fullrun_mos2_xmm0203390201_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Jul  5 19:04:12 2012] fullrun_mos2_xmm0203390201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul  5 19:04:12 2012] fullrun_mos2_xmm0203390201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul  5 19:04:12 2012] Fit fullrun_mos2_xmm0203390201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul  5 19:04:18 2012] Spatial fit model total counts = 217.425000, observed total counts = 199.000000
[Thu Jul  5 19:04:18 2012] Offset between fit and detection position for source 4 = 0.968225 pixels
[Thu Jul  5 19:04:18 2012] 215.485700 total counts/ 156.142000 bgd. counts: snr = 4.749138
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.968225 pixels
  Position = (399.8, 331.2) = 1 44 5.58 17 7 23.5
  Extent = 7.6 (5.1-10.8)", rotation angle = 0
  Source counts = 59.3 +/- 14.7
  Background counts = 156.1
  Rate = 0.005 +/- 0.001
[Thu Jul  5 19:04:18 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 19:04:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 19:04:18 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 19:04:18 2012] Source does appear to be extended
[Thu Jul  5 19:04:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 19:15:27 2012] XMMSAS src. selection expression = ellipse(34734.602800, 28763.087600, 456.701413, 456.701413, 0.000000, X, Y)
[Thu Jul  5 19:15:27 2012] Writing source region out to fullrun_mos2_xmm0203390201_pi300-10000_pass1_cl_src4_src.reg
[Thu Jul  5 19:15:27 2012] Extracting stamp from image fullrun_mos2_xmm0203390201_pi300-10000_cl_sm2.00.img.gz, (374, 305) - (426, 357)
[Thu Jul  5 19:15:27 2012] XMMSAS bgd. selection expression = annulus(34734.602800, 28763.087600, 761.169022, 1522.338044, X, Y)
[Thu Jul  5 19:15:27 2012] Writing fullrun_mos2_xmm0203390201_pi300-10000_pass1_cl_src4.gif
[Thu Jul  5 19:15:28 2012] Mean detx,y = (-6096.33, 4082.96) 
[Thu Jul  5 19:15:29 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 19:15:39 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 19:15:39 2012] Setting source spectrum file to fullrun_mos2_xmm0203390201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul  5 19:15:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203390201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Jul  5 19:16:54 2012] Not generating rmf since there are only 59 counts
[Thu Jul  5 19:16:54 2012] rmf not generated due to insufficient counts
[Thu Jul  5 19:17:57 2012] Updating aperture counts using extracted products
[Thu Jul  5 19:17:57 2012] Error reading totcts from fullrun_mos2_xmm0203390201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul  5 19:17:57 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 19:17:57 2012] Using photon index=1.80, rate=0.00526, arf fullrun_mos2_xmm0203390201_pi300-10000_pass1_cl_src4.arf
[Thu Jul  5 19:17:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 19:17:57 2012] Updating source flux to 8.6e-14
[Thu Jul  5 19:17:59 2012] Flag p found in src. 4 procflags, skipping spectral fitting
[Thu Jul  5 19:17:59 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jul  5 19:18:00 2012] xmm0203390201/analysis//spectral/fullrun_mos2_xmm0203390201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete