[Sun Mar 18 12:16:49 2012] Detection parameters:
  Position = (230.4, 188.6) = 1 20 29.04 14 12 47.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.2 +/- 14.8
  Background counts = 65.6
  Rate = 0.006 +/- 0.001

[Sun Mar 18 12:16:49 2012] Off-axis axis estimate = 9.37'
[Sun Mar 18 12:20:23 2012] Using EEF radius (= 11.11 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 12:20:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 18 12:20:23 2012] Initial guess for spatial extent in simple fitting = 11.11"
[Sun Mar 18 12:20:23 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.965
[Sun Mar 18 12:20:23 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.11"
[Sun Mar 18 12:30:40 2012] fullrun_pn_xmm0203390101_pi300-10000_cl_pass0_src2.ximg exists
[Sun Mar 18 12:30:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203390101_pi300-10000_cl_pass0_src2.csv
[Sun Mar 18 12:30:40 2012] fullrun_pn_xmm0203390101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Mar 18 12:30:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203390101_pi300-10000_cl_pass0_src2.csv
[Sun Mar 18 12:30:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0203390101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0203390101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 12:30:40 2012] fullrun_pn_xmm0203390101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Mar 18 12:30:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203390101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Mar 18 12:30:40 2012] fullrun_pn_xmm0203390101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Mar 18 12:30:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203390101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Mar 18 12:30:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0203390101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0203390101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 12:59:36 2012] Source 2 is offset by -7.741120 and 2.480376 pixels which is larger than
2 X fitted extent = 1.277191 x 1.277191, not incorporating fit results
[Sun Mar 18 12:59:36 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 12:59:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 12:59:36 2012] Assessing source extent using major
[Sun Mar 18 12:59:36 2012] Source does appear to be extended
[Sun Mar 18 12:59:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 12:59:48 2012] Using EEF radius (= 11.11 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 12:59:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 18 12:59:48 2012] Initial guess for spatial extent in simple fitting = 11.11"
[Sun Mar 18 12:59:48 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.965
[Sun Mar 18 12:59:48 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.11"
[Sun Mar 18 13:09:45 2012] fullrun_pn_xmm0203390101_pi300-10000_cl_pass1_src2.ximg exists
[Sun Mar 18 13:09:45 2012] fullrun_pn_xmm0203390101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Mar 18 13:09:45 2012] Fit fullrun_pn_xmm0203390101_pi300-10000_cl_pass1_src2 appears to have run properly
[Sun Mar 18 13:09:45 2012] fullrun_pn_xmm0203390101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Mar 18 13:09:45 2012] fullrun_pn_xmm0203390101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Mar 18 13:09:45 2012] Fit fullrun_pn_xmm0203390101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Mar 18 13:34:15 2012] Source 2 is offset by 6.944558 and 2.491710 pixels which is larger than
2 X fitted extent = 1.441108 x 1.441108, not incorporating fit results
[Sun Mar 18 13:34:15 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 13:34:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 13:34:15 2012] Assessing source extent using major
[Sun Mar 18 13:34:15 2012] Source does appear to be extended
[Sun Mar 18 13:34:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 13:34:27 2012] XMMSAS src. selection expression = ellipse(19994.840530, 16362.238739, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 18 13:34:27 2012] Writing source region out to fullrun_pn_xmm0203390101_pi300-10000_pass1_cl_src2_src.reg
[Sun Mar 18 13:34:27 2012] Extracting stamp from image fullrun_pn_xmm0203390101_pi300-10000_cl_sm2.00.img.gz, (193, 151) - (268, 226)
[Sun Mar 18 13:34:27 2012] XMMSAS bgd. selection expression = annulus(19994.840530, 16362.238739, 1087.500000, 2175.000000, X, Y)
[Sun Mar 18 13:34:27 2012] Writing fullrun_pn_xmm0203390101_pi300-10000_pass1_cl_src2.gif
[Sun Mar 18 13:35:40 2012] Mean detx,y = (-2984.06, 12555.07) 
[Sun Mar 18 13:35:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 13:36:13 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 13:36:14 2012] Setting source spectrum file to fullrun_pn_xmm0203390101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Mar 18 13:36:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0203390101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Mar 18 13:39:04 2012] Not generating rmf since there are only 64 counts
[Sun Mar 18 13:39:04 2012] rmf not generated due to insufficient counts
[Sun Mar 18 13:48:05 2012] Updating aperture counts using extracted products
[Sun Mar 18 13:48:05 2012] Error reading totcts from fullrun_pn_xmm0203390101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Mar 18 13:48:06 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 13:48:06 2012] Using photon index=1.80, rate=0.00558, arf fullrun_pn_xmm0203390101_pi300-10000_pass1_cl_src2.arf
[Sun Mar 18 13:48:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 13:48:06 2012] Updating source flux to 3.3e-14
[Sun Mar 18 13:48:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Mar 18 13:48:11 2012] xmm0203390101/analysis//spectral/fullrun_pn_xmm0203390101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete