[Wed May 16 17:11:19 2012] Detection parameters:
  Position = (310.8, 329.0) = 9 58 21.59 2 46 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1846.3 +/- 52.4
  Background counts = 51.1
  Rate = 0.04 +/- 0.001

[Wed May 16 17:11:24 2012] Off-axis axis estimate = 2.39'
[Wed May 16 17:18:51 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Wed May 16 17:18:51 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Wed May 16 17:18:51 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.985
[Wed May 16 17:18:51 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.62"
[Wed May 16 21:06:12 2012] fullrun_pn_xmm0203362101_pi300-10000_cl_pass0_src2.ximg exists
[Wed May 16 21:06:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203362101_pi300-10000_cl_pass0_src2.csv
[Wed May 16 21:06:12 2012] fullrun_pn_xmm0203362101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May 16 21:06:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203362101_pi300-10000_cl_pass0_src2.csv
[Wed May 16 21:06:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0203362101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0203362101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 21:06:14 2012] fullrun_pn_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May 16 21:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May 16 21:06:14 2012] fullrun_pn_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May 16 21:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May 16 21:06:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 01:16:11 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.780948 pixels away
[Thu May 17 01:16:11 2012] Vigneting correction estimate = 1.000000
[Thu May 17 01:16:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 01:16:11 2012] Assessing source extent using major
[Thu May 17 01:16:11 2012] Source does appear to be extended
[Thu May 17 01:16:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 01:17:03 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Thu May 17 01:17:03 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Thu May 17 01:17:03 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.985
[Thu May 17 01:17:03 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.62"
[Thu May 17 04:24:24 2012] fullrun_pn_xmm0203362101_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 17 04:24:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203362101_pi300-10000_cl_pass1_src2.csv
[Thu May 17 04:24:24 2012] fullrun_pn_xmm0203362101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 17 04:24:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203362101_pi300-10000_cl_pass1_src2.csv
[Thu May 17 04:24:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0203362101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0203362101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 04:24:25 2012] fullrun_pn_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 17 04:24:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 17 04:24:25 2012] fullrun_pn_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 17 04:24:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 17 04:24:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 08:12:01 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.780948 pixels away
[Thu May 17 08:12:01 2012] Vigneting correction estimate = 1.000000
[Thu May 17 08:12:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 08:12:01 2012] Assessing source extent using major
[Thu May 17 08:12:01 2012] Source does appear to be extended
[Thu May 17 08:12:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 08:12:58 2012] Counts = 1846.349731, rescaling region sizes by 2.000000
[Thu May 17 08:12:58 2012] XMMSAS src. selection expression = ellipse(26986.837616, 28578.055084, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu May 17 08:12:58 2012] Writing source region out to fullrun_pn_xmm0203362101_pi300-10000_pass1_cl_src3_src.reg
[Thu May 17 08:12:58 2012] Extracting stamp from image fullrun_pn_xmm0203362101_pi300-10000_cl_sm2.00.img.gz, (236, 254) - (386, 404)
[Thu May 17 08:12:58 2012] XMMSAS bgd. selection expression = annulus(26986.837616, 28578.055084, 4350.000000, 8700.000000, X, Y) && !ellipse(23992.113251, 31638.836578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34941.730180, 30546.274000, 462.612013, 462.612013, 0.000000, X, Y) && !ellipse(23265.768921, 26145.464142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18879.278198, 36074.291351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22184.380798, 33472.997192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34416.487280, 31260.009140, 323.926409, 323.926409, 0.000000, X, Y) && !ellipse(33597.664093, 29104.844757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33061.709259, 24983.286133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26403.680080, 22141.863200, 439.988813, 373.376811, 133.881789, X, Y) && !ellipse(23438.714874, 33184.698181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31615.734921, 26427.234062, 471.686158, 310.417083, 79.028319, X, Y) && !ellipse(34720.197205, 35076.549927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24682.458038, 33340.009430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26539.988220, 31927.154175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24675.341100, 25968.348200, 423.061612, 423.061612, 0.000000, X, Y) && !ellipse(32077.150055, 19459.512283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27037.530090, 34350.824219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26199.860382, 34064.004059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21269.343536, 32189.056885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26050.315857, 31864.261841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17931.134048, 31584.830627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26412.525574, 30604.161041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35456.104950, 29977.024536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26620.430298, 29685.895264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33948.578740, 28179.431600, 521.899215, 234.300007, 31.737000, X, Y) && !ellipse(30110.425200, 27688.177980, 328.907461, 328.907461, 0.000000, X, Y) && !ellipse(18129.876266, 26342.392975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25520.716120, 26164.969000, 451.871213, 301.391209, 164.778221, X, Y) && !ellipse(27274.425079, 24802.497223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30661.995544, 24746.537170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35447.380524, 22305.269592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20400.463959, 21920.419113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34197.469727, 20118.287445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19443.463959, 19846.707153, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 17 08:12:58 2012] Writing fullrun_pn_xmm0203362101_pi300-10000_pass1_cl_src3.gif
[Thu May 17 08:25:50 2012] Mean detx,y = (-3079.33, 3531.93) 
[Thu May 17 08:26:09 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 08:31:16 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 08:31:17 2012] Setting source spectrum file to fullrun_pn_xmm0203362101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 17 08:31:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0203362101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May 17 10:53:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 17 10:53:41 2012] rmf not generated due to insufficient counts
[Thu May 17 15:22:37 2012] Updating aperture counts using extracted products
[Thu May 17 15:22:37 2012] Error reading totcts from fullrun_pn_xmm0203362101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 17 15:22:43 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 15:22:43 2012] Using photon index=1.80, rate=0.0422, arf fullrun_pn_xmm0203362101_pi300-10000_pass1_cl_src3.arf
[Thu May 17 15:22:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 15:22:43 2012] Updating source flux to 1.3e-13
[Thu May 17 15:26:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 17 15:28:41 2012] xmm0203362101/analysis//spectral/fullrun_pn_xmm0203362101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete