[Wed May 16 17:13:02 2012] Detection parameters:
  Position = (201.6, 135.2) = 9 58 53.27 2 32 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.2 +/- 11.1
  Background counts = 13.9
  Rate = 0.0009 +/- 0.0002

[Wed May 16 17:13:02 2012] Off-axis axis estimate = 13.76'
[Wed May 16 22:58:59 2012] Using EEF radius (= 13.31 ")to estimate initial spatial extent for simple fitting
[Wed May 16 22:58:59 2012] Initial guess for spatial extent in simple fitting = 13.31"
[Wed May 16 22:58:59 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.967
[Wed May 16 22:58:59 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 13.31"
[Thu May 17 01:15:45 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src43.ximg exists
[Thu May 17 01:15:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src43.csv
[Thu May 17 01:15:45 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src43_1.ximg exists
[Thu May 17 01:15:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src43.csv
[Thu May 17 01:15:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 01:15:46 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Thu May 17 01:15:46 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Thu May 17 01:15:46 2012] Fit fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Thu May 17 01:16:33 2012] Spatial fit model total counts = 222.419000, observed total counts = 220.000000
[Thu May 17 01:16:33 2012] Offset between fit and detection position for source 50 = 1.020302 pixels
[Thu May 17 01:16:33 2012] 225.499600 total counts/ 173.804000 bgd. counts: snr = 3.921242
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 1.020302 pixels
  Position = (202.6, 135.3) = 9 58 52.98 2 32 26.6
  Extent = 8.0 (5.8-14.7)", rotation angle = 0
  Source counts = 51.7 +/- 15.0
  Background counts = 173.8
  Rate = 0.0008 +/- 0.0002
[Thu May 17 01:16:33 2012] Vigneting correction estimate = 1.000000
[Thu May 17 01:16:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 01:16:33 2012] Assessing source extent using major axis lower bound
[Thu May 17 01:16:33 2012] Source does appear to be extended
[Thu May 17 01:16:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 06:08:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 06:08:22 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Thu May 17 06:08:22 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.141
[Thu May 17 06:08:22 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 8.00"
[Thu May 17 08:11:34 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src43.ximg exists
[Thu May 17 08:11:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src43.csv
[Thu May 17 08:11:34 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src43_1.ximg exists
[Thu May 17 08:11:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src43.csv
[Thu May 17 08:11:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 08:11:35 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Thu May 17 08:11:35 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Thu May 17 08:11:35 2012] Fit fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Thu May 17 08:12:26 2012] Spatial fit model total counts = 190.997000, observed total counts = 191.000000
[Thu May 17 08:12:26 2012] Offset between fit and detection position for source 50 = 0.152581 pixels
[Thu May 17 08:12:26 2012] 194.063100 total counts/ 139.295000 bgd. counts: snr = 4.640448
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.152581 pixels
  Position = (202.7, 135.4) = 9 58 52.95 2 32 27.1
  Extent = 8.6 (5.8-16.0)", rotation angle = 0
  Source counts = 54.8 +/- 13.9
  Background counts = 139.3
  Rate = 0.0009 +/- 0.0002
[Thu May 17 08:12:26 2012] Vigneting correction estimate = 1.000000
[Thu May 17 08:12:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 08:12:26 2012] Assessing source extent using major axis lower bound
[Thu May 17 08:12:26 2012] Source does appear to be extended
[Thu May 17 08:12:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 13:51:03 2012] XMMSAS src. selection expression = ellipse(17589.706200, 11729.071800, 516.550215, 516.550215, 0.000000, X, Y)
[Thu May 17 13:51:03 2012] Writing source region out to fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src50_src.reg
[Thu May 17 13:51:03 2012] Extracting stamp from image fullrun_mos2_xmm0203362101_pi300-10000_cl_sm2.00.img.gz, (173, 106) - (232, 165)
[Thu May 17 13:51:03 2012] XMMSAS bgd. selection expression = annulus(17589.706200, 11729.071800, 860.917025, 1721.834050, X, Y)
[Thu May 17 13:51:03 2012] Writing fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src50.gif
[Thu May 17 14:13:58 2012] Mean detx,y = (-11979.60, 8203.76) 
[Thu May 17 14:14:01 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 14:14:24 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 14:14:25 2012] Setting source spectrum file to fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Thu May 17 14:14:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Thu May 17 15:19:11 2012] Not generating rmf since there are only 54 counts
[Thu May 17 15:19:11 2012] rmf not generated due to insufficient counts
[Thu May 17 15:22:58 2012] Updating aperture counts using extracted products
[Thu May 17 15:22:58 2012] Error reading totcts from fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Thu May 17 15:23:02 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 15:23:02 2012] Using photon index=1.80, rate=0.000885, arf fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src50.arf
[Thu May 17 15:23:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 15:23:02 2012] Updating source flux to 2.5e-14
[Thu May 17 15:24:38 2012] Source 50 has fewer than 100.000000 counts, skipping spectral fitting