[Wed May 16 17:13:02 2012] Detection parameters:
  Position = (322.7, 164.1) = 9 58 18.11 2 34 32.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.0 +/- 14.7
  Background counts = 16.6
  Rate = 0.004 +/- 0.0005

[Wed May 16 17:13:02 2012] Off-axis axis estimate = 9.90'
[Wed May 16 22:58:59 2012] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Wed May 16 22:58:59 2012] Initial guess for spatial extent in simple fitting = 11.38"
[Wed May 16 22:58:59 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.927
[Wed May 16 22:58:59 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 11.38"
[Thu May 17 01:15:45 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src12.ximg exists
[Thu May 17 01:15:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src12.csv
[Thu May 17 01:15:45 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu May 17 01:15:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src12.csv
[Thu May 17 01:15:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 01:15:46 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu May 17 01:15:46 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu May 17 01:15:46 2012] Fit fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Thu May 17 01:16:33 2012] Warning, spatial fit 12 centroid is now closest to src. 44
[Thu May 17 01:16:33 2012] Vigneting correction estimate = 1.000000
[Thu May 17 01:16:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 01:16:33 2012] Assessing source extent using major
[Thu May 17 01:16:33 2012] Source does appear to be extended
[Thu May 17 01:16:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 06:08:22 2012] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Thu May 17 06:08:22 2012] Initial guess for spatial extent in simple fitting = 11.38"
[Thu May 17 06:08:22 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.927
[Thu May 17 06:08:22 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 11.38"
[Thu May 17 08:11:33 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src12.ximg exists
[Thu May 17 08:11:33 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu May 17 08:11:33 2012] Fit fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src12 appears to have run properly
[Thu May 17 08:11:34 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu May 17 08:11:34 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu May 17 08:11:34 2012] Fit fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Thu May 17 08:12:26 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 47 at 14.929695 pixels away
[Thu May 17 08:12:26 2012] Vigneting correction estimate = 1.000000
[Thu May 17 08:12:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 08:12:26 2012] Assessing source extent using major
[Thu May 17 08:12:26 2012] Source does appear to be extended
[Thu May 17 08:12:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 13:51:02 2012] XMMSAS src. selection expression = ellipse(28029.600372, 14230.997604, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 17 13:51:02 2012] Writing source region out to fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src47_src.reg
[Thu May 17 13:51:02 2012] Extracting stamp from image fullrun_mos2_xmm0203362101_pi300-10000_cl_sm2.00.img.gz, (285, 127) - (360, 202)
[Thu May 17 13:51:02 2012] XMMSAS bgd. selection expression = annulus(28029.600372, 14230.997604, 1087.500000, 2175.000000, X, Y) && !ellipse(25892.220000, 15039.578000, 529.473615, 529.473615, 0.000000, X, Y) && !ellipse(26692.365662, 16951.189285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26296.673370, 15278.700043, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 17 13:51:02 2012] Writing fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src47.gif
[Thu May 17 13:57:01 2012] Mean detx,y = (-1430.21, 9934.14) 
[Thu May 17 13:57:03 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 13:57:22 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 13:57:23 2012] Setting source spectrum file to fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Thu May 17 13:57:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Thu May 17 14:59:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 17 14:59:50 2012] rmf not generated due to insufficient counts
[Thu May 17 15:22:56 2012] Updating aperture counts using extracted products
[Thu May 17 15:22:56 2012] Error reading totcts from fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Thu May 17 15:22:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 15:22:59 2012] Using photon index=1.80, rate=0.0038, arf fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src47.arf
[Thu May 17 15:22:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 15:22:59 2012] Updating source flux to 7.2e-14
[Thu May 17 15:24:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting