[Wed May 16 17:13:02 2012] Detection parameters:
  Position = (322.1, 319.9) = 9 58 18.30 2 45 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.1 +/- 10.8
  Background counts = 17.3
  Rate = 0.001 +/- 0.0002

[Wed May 16 17:13:02 2012] Off-axis axis estimate = 2.32'
[Wed May 16 22:58:59 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Wed May 16 22:58:59 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Wed May 16 22:58:59 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.794
[Wed May 16 22:58:59 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 7.59"
[Thu May 17 01:15:45 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src39.ximg exists
[Thu May 17 01:15:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src39.csv
[Thu May 17 01:15:45 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src39_1.ximg exists
[Thu May 17 01:15:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src39.csv
[Thu May 17 01:15:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 01:15:46 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Thu May 17 01:15:46 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Thu May 17 01:15:46 2012] Fit fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Thu May 17 01:16:33 2012] Spatial fit model total counts = 235.920000, observed total counts = 236.000000
[Thu May 17 01:16:33 2012] Offset between fit and detection position for source 19 = 0.153187 pixels
[Thu May 17 01:16:33 2012] 235.311000 total counts/ 202.474000 bgd. counts: snr = 2.307697
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.153187 pixels
  Position = (321.9, 320.0) = 9 58 18.35 2 45 50.0
  Extent = 3.7 (2.6-5.4)", rotation angle = 0
  Source counts = 32.8 +/- 15.3
  Background counts = 202.5
  Rate = 0.0005 +/- 0.0002
[Thu May 17 01:16:33 2012] Vigneting correction estimate = 1.000000
[Thu May 17 01:16:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 01:16:33 2012] Assessing source extent using major axis lower bound
[Thu May 17 01:16:33 2012] Source does appear to be extended
[Thu May 17 01:16:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 06:08:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 06:08:22 2012] Initial guess for spatial extent in simple fitting = 3.66"
[Thu May 17 06:08:22 2012] source mask rpix=0.8, npix_max = 7, mask sum = 4, frac = 0.556
[Thu May 17 06:08:22 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 3.66"
[Thu May 17 08:11:34 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src39.ximg exists
[Thu May 17 08:11:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src39.csv
[Thu May 17 08:11:34 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src39_1.ximg exists
[Thu May 17 08:11:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src39.csv
[Thu May 17 08:11:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 08:11:34 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Thu May 17 08:11:34 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Thu May 17 08:11:35 2012] Fit fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Thu May 17 08:12:26 2012] Spatial fit model total counts = 235.755000, observed total counts = 236.000000
[Thu May 17 08:12:26 2012] Offset between fit and detection position for source 19 = 0.007899 pixels
[Thu May 17 08:12:26 2012] 234.883100 total counts/ 202.016000 bgd. counts: snr = 2.312430
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.007899 pixels
  Position = (321.9, 320.0) = 9 58 18.35 2 45 50.0
  Extent = 3.7 (2.6-5.4)", rotation angle = 0
  Source counts = 32.9 +/- 15.3
  Background counts = 202.0
  Rate = 0.0005 +/- 0.0002
[Thu May 17 08:12:26 2012] Vigneting correction estimate = 1.000000
[Thu May 17 08:12:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 08:12:26 2012] Assessing source extent using major axis lower bound
[Thu May 17 08:12:26 2012] Source does appear to be extended
[Thu May 17 08:12:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 13:51:03 2012] XMMSAS src. selection expression = ellipse(27959.606320, 27787.987600, 221.591406, 221.591406, 0.000000, X, Y)
[Thu May 17 13:51:03 2012] Writing source region out to fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src19_src.reg
[Thu May 17 13:51:03 2012] Extracting stamp from image fullrun_mos2_xmm0203362101_pi300-10000_cl_sm2.00.img.gz, (309, 307) - (335, 333)
[Thu May 17 13:51:03 2012] XMMSAS bgd. selection expression = annulus(27959.606320, 27787.987600, 369.319011, 738.638021, X, Y) && !ellipse(26963.169200, 28577.573600, 340.936810, 340.936810, 0.000000, X, Y)
[Thu May 17 13:51:03 2012] Writing fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src19.gif
[Thu May 17 14:11:52 2012] Mean detx,y = (3771.33, -2550.61) 
[Thu May 17 14:11:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 14:12:08 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 14:12:09 2012] Setting source spectrum file to fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu May 17 14:12:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu May 17 15:18:46 2012] Not generating rmf since there are only 32 counts
[Thu May 17 15:18:46 2012] rmf not generated due to insufficient counts
[Thu May 17 15:22:58 2012] Updating aperture counts using extracted products
[Thu May 17 15:22:58 2012] Error reading totcts from fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu May 17 15:23:01 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 15:23:01 2012] Using photon index=1.80, rate=0.000531, arf fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src19.arf
[Thu May 17 15:23:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 15:23:01 2012] Updating source flux to 7.8e-15
[Thu May 17 15:24:38 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting