[Wed May 16 17:13:02 2012] Detection parameters:
  Position = (302.6, 368.5) = 9 58 23.97 2 49 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.6 +/- 8.3
  Background counts = 16.7
  Rate = 0.001 +/- 0.0002

[Wed May 16 17:13:02 2012] Off-axis axis estimate = 5.09'
[Wed May 16 22:58:59 2012] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Wed May 16 22:58:59 2012] Initial guess for spatial extent in simple fitting = 8.97"
[Wed May 16 22:58:59 2012] source mask rpix=2.1, npix_max = 26, mask sum = 19, frac = 0.723
[Wed May 16 22:58:59 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 8.97"
[Thu May 17 01:15:45 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src40.ximg exists
[Thu May 17 01:15:45 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src40_1.ximg exists
[Thu May 17 01:15:45 2012] Fit fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_src40 appears to have run properly
[Thu May 17 01:15:46 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Thu May 17 01:15:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Thu May 17 01:15:46 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Thu May 17 01:15:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Thu May 17 01:15:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 01:16:33 2012] Spatial fit model total counts = 235.331000, observed total counts = 245.000000
[Thu May 17 01:16:33 2012] Offset between fit and detection position for source 10 = 0.848587 pixels
[Thu May 17 01:16:33 2012] 235.034500 total counts/ 203.673000 bgd. counts: snr = 2.197506
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.848587 pixels
  Position = (301.9, 368.0) = 9 58 24.17 2 49 19.1
  Extent = 4.5 (17.9-17.9)" x 2.5 (17.9-35.9)", rotation angle = 306 (232-0) degrees
  Source counts = 31.4 +/- 15.3
  Background counts = 203.7
  Rate = 0.0005 +/- 0.0002
[Thu May 17 01:16:33 2012] Vigneting correction estimate = 1.000000
[Thu May 17 01:16:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 01:16:33 2012] Assessing source extent using major axis lower bound
[Thu May 17 01:16:33 2012] Source does appear to be extended
[Thu May 17 01:16:33 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.50
[Thu May 17 06:08:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 06:08:22 2012] Initial guess for spatial extent in simple fitting = 3.51"
[Thu May 17 06:08:22 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.586
[Thu May 17 06:08:22 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 3.51"
[Thu May 17 08:11:34 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src40.ximg exists
[Thu May 17 08:11:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src40.csv
[Thu May 17 08:11:34 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src40_1.ximg exists
[Thu May 17 08:11:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src40.csv
[Thu May 17 08:11:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 08:11:35 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Thu May 17 08:11:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src40.csv
[Thu May 17 08:11:35 2012] fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Thu May 17 08:11:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src40.csv
[Thu May 17 08:11:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 08:12:26 2012] Warning, spatial fit 40 centroid is now closest to src. 20
[Thu May 17 08:12:26 2012] Vigneting correction estimate = 1.000000
[Thu May 17 08:12:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 08:12:26 2012] Assessing source extent using major axis lower bound
[Thu May 17 08:12:26 2012] Source does appear to be extended
[Thu May 17 08:12:26 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.50
[Thu May 17 13:51:03 2012] XMMSAS src. selection expression = ellipse(26215.580000, 31969.363400, 270.360608, 150.820204, 305.785394, X, Y)
[Thu May 17 13:51:03 2012] Writing source region out to fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src10_src.reg
[Thu May 17 13:51:03 2012] Extracting stamp from image fullrun_mos2_xmm0203362101_pi300-10000_cl_sm2.00.img.gz, (286, 352) - (317, 384)
[Thu May 17 13:51:03 2012] XMMSAS bgd. selection expression = annulus(26215.580000, 31969.363400, 450.601013, 901.202026, X, Y) && !ellipse(26412.270380, 30610.783800, 496.433614, 496.433614, 0.000000, X, Y)
[Thu May 17 13:51:03 2012] Writing fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src10.gif
[Thu May 17 14:12:16 2012] Mean detx,y = (3781.78, -7079.91) 
[Thu May 17 14:12:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 14:12:47 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 14:12:48 2012] Setting source spectrum file to fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 17 14:12:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu May 17 15:18:51 2012] Not generating rmf since there are only 31 counts
[Thu May 17 15:18:51 2012] rmf not generated due to insufficient counts
[Thu May 17 15:22:58 2012] Updating aperture counts using extracted products
[Thu May 17 15:22:58 2012] Error reading totcts from fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 17 15:23:01 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 15:23:01 2012] Using photon index=1.80, rate=0.000507, arf fullrun_mos2_xmm0203362101_pi300-10000_pass1_cl_src10.arf
[Thu May 17 15:23:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 15:23:01 2012] Updating source flux to 1.3e-14
[Thu May 17 15:24:38 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting