[Wed May 16 17:12:21 2012] Detection parameters:
  Position = (307.0, 196.3) = 9 58 22.70 2 36 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.4 +/- 9.4
  Background counts = 16.7
  Rate = 0.001 +/- 0.0002

[Wed May 16 17:12:21 2012] Off-axis axis estimate = 7.43'
[Wed May 16 21:06:15 2012] Using EEF radius (= 10.14 ")to estimate initial spatial extent for simple fitting
[Wed May 16 21:06:15 2012] Initial guess for spatial extent in simple fitting = 10.14"
[Wed May 16 21:06:15 2012] source mask rpix=2.3, npix_max = 32, mask sum = 34, frac = 1.060
[Wed May 16 21:06:15 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 10.14"
[Wed May 16 22:58:57 2012] fullrun_mos1_xmm0203362101_pi300-10000_cl_pass0_src36.ximg exists
[Wed May 16 22:58:57 2012] fullrun_mos1_xmm0203362101_pi300-10000_cl_pass0_src36_1.ximg exists
[Wed May 16 22:58:57 2012] Fit fullrun_mos1_xmm0203362101_pi300-10000_cl_pass0_src36 appears to have run properly
[Wed May 16 22:58:58 2012] fullrun_mos1_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Wed May 16 22:58:58 2012] fullrun_mos1_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Wed May 16 22:58:58 2012] Fit fullrun_mos1_xmm0203362101_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Thu May 17 01:16:24 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 12.236734 pixels away
[Thu May 17 01:16:24 2012] Spatial fit model total counts = 191.368000, observed total counts = 184.000000
[Thu May 17 01:16:24 2012] Offset between fit and detection position for source 39 = 0.218382 pixels
[Thu May 17 01:16:24 2012] 187.720200 total counts/ 149.724000 bgd. counts: snr = 3.105235
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.218382 pixels
  Position = (307.2, 196.2) = 9 58 22.64 2 36 51.7
  Extent = 5.8 (3.6-8.8)", rotation angle = 0
  Source counts = 38.0 +/- 13.7
  Background counts = 149.7
  Rate = 0.0006 +/- 0.0002
[Thu May 17 01:16:24 2012] Vigneting correction estimate = 1.000000
[Thu May 17 01:16:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 01:16:24 2012] Assessing source extent using major axis lower bound
[Thu May 17 01:16:24 2012] Source does appear to be extended
[Thu May 17 01:16:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 04:24:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 04:24:27 2012] Initial guess for spatial extent in simple fitting = 5.78"
[Thu May 17 04:24:27 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.196
[Thu May 17 04:24:27 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 5.78"
[Thu May 17 06:08:21 2012] fullrun_mos1_xmm0203362101_pi300-10000_cl_pass1_src36.ximg exists
[Thu May 17 06:08:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203362101_pi300-10000_cl_pass1_src36.csv
[Thu May 17 06:08:21 2012] fullrun_mos1_xmm0203362101_pi300-10000_cl_pass1_src36_1.ximg exists
[Thu May 17 06:08:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203362101_pi300-10000_cl_pass1_src36.csv
[Thu May 17 06:08:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203362101_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203362101_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 06:08:22 2012] fullrun_mos1_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Thu May 17 06:08:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Thu May 17 06:08:22 2012] fullrun_mos1_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Thu May 17 06:08:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Thu May 17 06:08:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203362101_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 08:12:13 2012] Warning, spatial fit 36 centroid is now closest to src. 43
[Thu May 17 08:12:13 2012] Vigneting correction estimate = 1.000000
[Thu May 17 08:12:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 08:12:13 2012] Assessing source extent using major axis lower bound
[Thu May 17 08:12:13 2012] Source does appear to be extended
[Thu May 17 08:12:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 12:23:44 2012] XMMSAS src. selection expression = ellipse(26674.290600, 17020.511800, 346.737610, 346.737610, 0.000000, X, Y)
[Thu May 17 12:23:44 2012] Writing source region out to fullrun_mos1_xmm0203362101_pi300-10000_pass1_cl_src39_src.reg
[Thu May 17 12:23:44 2012] Extracting stamp from image fullrun_mos1_xmm0203362101_pi300-10000_cl_sm2.00.img.gz, (287, 176) - (327, 216)
[Thu May 17 12:23:44 2012] XMMSAS bgd. selection expression = annulus(26674.290600, 17020.511800, 577.896017, 1155.792033, X, Y)
[Thu May 17 12:23:44 2012] Writing fullrun_mos1_xmm0203362101_pi300-10000_pass1_cl_src39.gif
[Thu May 17 12:44:40 2012] Mean detx,y = (7071.18, 1459.42) 
[Thu May 17 12:44:43 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 12:45:14 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 12:45:14 2012] Setting source spectrum file to fullrun_mos1_xmm0203362101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu May 17 12:45:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0203362101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Thu May 17 13:48:33 2012] Not generating rmf since there are only 37 counts
[Thu May 17 13:48:33 2012] rmf not generated due to insufficient counts
[Thu May 17 15:22:52 2012] Updating aperture counts using extracted products
[Thu May 17 15:22:52 2012] Error reading totcts from fullrun_mos1_xmm0203362101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu May 17 15:22:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 15:22:55 2012] Using photon index=1.80, rate=0.000614, arf fullrun_mos1_xmm0203362101_pi300-10000_pass1_cl_src39.arf
[Thu May 17 15:22:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 15:22:55 2012] Updating source flux to 1e-14
[Thu May 17 15:23:06 2012] Source 39 has fewer than 100.000000 counts, skipping spectral fitting