[Wed Mar 14 10:27:21 2012] Detection parameters:
  Position = (430.2, 320.5) = 9 58 47.02 2 15 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.4 +/- 8.9
  Background counts = 6.4
  Rate = 0.001 +/- 0.0003

[Wed Mar 14 10:27:22 2012] Off-axis axis estimate = 9.68'
[Wed Mar 14 14:32:53 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 14:32:53 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Wed Mar 14 14:32:53 2012] source mask rpix=2.6, npix_max = 38, mask sum = 40, frac = 1.047
[Wed Mar 14 14:32:53 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 11.27"
[Wed Mar 14 16:01:28 2012] fullrun_mos2_xmm0203361801_pi300-10000_cl_pass0_src35.ximg exists
[Wed Mar 14 16:01:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203361801_pi300-10000_cl_pass0_src35.csv
[Wed Mar 14 16:01:28 2012] fullrun_mos2_xmm0203361801_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed Mar 14 16:01:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203361801_pi300-10000_cl_pass0_src35.csv
[Wed Mar 14 16:01:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203361801_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203361801_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 16:01:28 2012] fullrun_mos2_xmm0203361801_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed Mar 14 16:01:28 2012] fullrun_mos2_xmm0203361801_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed Mar 14 16:01:28 2012] Fit fullrun_mos2_xmm0203361801_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Wed Mar 14 16:02:12 2012] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 14.336903 pixels away
[Wed Mar 14 16:02:12 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 14.320311 pixels away
[Wed Mar 14 16:02:12 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 16:02:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 16:02:12 2012] Assessing source extent using major
[Wed Mar 14 16:02:12 2012] Source does appear to be extended
[Wed Mar 14 16:02:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 19:21:00 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 19:21:00 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Wed Mar 14 19:21:00 2012] source mask rpix=2.6, npix_max = 38, mask sum = 40, frac = 1.047
[Wed Mar 14 19:21:00 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 11.27"
[Wed Mar 14 20:29:34 2012] fullrun_mos2_xmm0203361801_pi300-10000_cl_pass1_src35.ximg exists
[Wed Mar 14 20:29:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203361801_pi300-10000_cl_pass1_src35.csv
[Wed Mar 14 20:29:34 2012] fullrun_mos2_xmm0203361801_pi300-10000_cl_pass1_src35_1.ximg exists
[Wed Mar 14 20:29:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203361801_pi300-10000_cl_pass1_src35.csv
[Wed Mar 14 20:29:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203361801_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203361801_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 20:29:35 2012] fullrun_mos2_xmm0203361801_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Wed Mar 14 20:29:35 2012] fullrun_mos2_xmm0203361801_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Wed Mar 14 20:29:35 2012] Fit fullrun_mos2_xmm0203361801_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Wed Mar 14 20:29:59 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 13.628222 pixels away
[Wed Mar 14 20:29:59 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 20:29:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 20:29:59 2012] Assessing source extent using major
[Wed Mar 14 20:29:59 2012] Source does appear to be extended
[Wed Mar 14 20:29:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 23:02:12 2012] XMMSAS src. selection expression = ellipse(37377.268219, 27831.344025, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 14 23:02:12 2012] Writing source region out to fullrun_mos2_xmm0203361801_pi300-10000_pass1_cl_src23_src.reg
[Wed Mar 14 23:02:12 2012] Extracting stamp from image fullrun_mos2_xmm0203361801_pi300-10000_cl_sm2.00.img.gz, (393, 283) - (468, 358)
[Wed Mar 14 23:02:12 2012] XMMSAS bgd. selection expression = annulus(37377.268219, 27831.344025, 1087.500000, 2175.000000, X, Y) && !ellipse(39453.793182, 29434.304688, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 14 23:02:12 2012] Writing fullrun_mos2_xmm0203361801_pi300-10000_pass1_cl_src23.gif
[Wed Mar 14 23:12:53 2012] Mean detx,y = (12518.61, 1176.57) 
[Wed Mar 14 23:12:54 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 23:13:02 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 23:13:03 2012] Setting source spectrum file to fullrun_mos2_xmm0203361801_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed Mar 14 23:13:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203361801_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed Mar 14 23:44:25 2012] Not generating rmf since there are only 36 counts
[Wed Mar 14 23:44:25 2012] rmf not generated due to insufficient counts
[Wed Mar 14 23:45:25 2012] Updating aperture counts using extracted products
[Wed Mar 14 23:45:25 2012] Error reading totcts from fullrun_mos2_xmm0203361801_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed Mar 14 23:45:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 23:45:26 2012] Using photon index=1.80, rate=0.00127, arf fullrun_mos2_xmm0203361801_pi300-10000_pass1_cl_src23.arf
[Wed Mar 14 23:45:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 23:45:26 2012] Updating source flux to 3.2e-14
[Wed Mar 14 23:46:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting