[Thu Mar 15 14:00:14 2012] Detection parameters:
  Position = (340.5, 252.9) = 10 0 12.39 1 40 57.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.7 +/- 11.1
  Background counts = 14.4
  Rate = 0.003 +/- 0.0005

[Thu Mar 15 14:00:15 2012] Off-axis axis estimate = 4.49'
[Thu Mar 15 15:07:17 2012] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 15:07:17 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Thu Mar 15 15:07:17 2012] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.884
[Thu Mar 15 15:07:17 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.67"
[Thu Mar 15 15:55:38 2012] fullrun_mos1_xmm0203361501_pi300-10000_cl_pass0_src12.ximg exists
[Thu Mar 15 15:55:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361501_pi300-10000_cl_pass0_src12.csv
[Thu Mar 15 15:55:38 2012] fullrun_mos1_xmm0203361501_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Mar 15 15:55:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361501_pi300-10000_cl_pass0_src12.csv
[Thu Mar 15 15:55:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203361501_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203361501_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 15:55:38 2012] fullrun_mos1_xmm0203361501_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Mar 15 15:55:38 2012] fullrun_mos1_xmm0203361501_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Mar 15 15:55:38 2012] Fit fullrun_mos1_xmm0203361501_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Mar 15 16:56:06 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 10.907513 pixels away
[Thu Mar 15 16:56:06 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:56:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:56:06 2012] Assessing source extent using major
[Thu Mar 15 16:56:06 2012] Source does appear to be extended
[Thu Mar 15 16:56:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 17:47:01 2012] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 17:47:01 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Thu Mar 15 17:47:01 2012] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.884
[Thu Mar 15 17:47:01 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 8.67"
[Thu Mar 15 18:17:28 2012] fullrun_mos1_xmm0203361501_pi300-10000_cl_pass1_src11.ximg exists
[Thu Mar 15 18:17:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361501_pi300-10000_cl_pass1_src11.csv
[Thu Mar 15 18:17:28 2012] fullrun_mos1_xmm0203361501_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Mar 15 18:17:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361501_pi300-10000_cl_pass1_src11.csv
[Thu Mar 15 18:17:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203361501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203361501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 18:17:28 2012] fullrun_mos1_xmm0203361501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Mar 15 18:17:28 2012] fullrun_mos1_xmm0203361501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Mar 15 18:17:28 2012] Fit fullrun_mos1_xmm0203361501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Mar 15 19:07:05 2012] Spatial fit model total counts = 177.686000, observed total counts = 169.000000
[Thu Mar 15 19:07:05 2012] Offset between fit and detection position for source 12 = 0.120306 pixels
[Thu Mar 15 19:07:05 2012] 178.937300 total counts/ 125.786000 bgd. counts: snr = 4.739120
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.120306 pixels
  Position = (340.4, 253.0) = 10 0 12.42 1 40 57.6
  Extent = 6.8 (4.8-9.3)", rotation angle = 0
  Source counts = 53.2 +/- 13.4
  Background counts = 125.8
  Rate = 0.002 +/- 0.0004
[Thu Mar 15 19:07:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 19:07:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 19:07:05 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 19:07:05 2012] Source does appear to be extended
[Thu Mar 15 19:07:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 19:49:43 2012] XMMSAS src. selection expression = ellipse(29562.754600, 21961.893842, 410.188017, 410.188017, 0.000000, X, Y)
[Thu Mar 15 19:49:43 2012] Writing source region out to fullrun_mos1_xmm0203361501_pi300-10000_pass1_cl_src12_src.reg
[Thu Mar 15 19:49:43 2012] Extracting stamp from image fullrun_mos1_xmm0203361501_pi300-10000_cl_sm2.00.img.gz, (317, 229) - (364, 277)
[Thu Mar 15 19:49:43 2012] XMMSAS bgd. selection expression = annulus(29562.754600, 21961.893842, 683.646695, 1367.293390, X, Y)
[Thu Mar 15 19:49:43 2012] Writing fullrun_mos1_xmm0203361501_pi300-10000_pass1_cl_src12.gif
[Thu Mar 15 19:53:04 2012] Mean detx,y = (3529.25, -3466.57) 
[Thu Mar 15 19:53:05 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 19:53:11 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 19:53:11 2012] Setting source spectrum file to fullrun_mos1_xmm0203361501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Mar 15 19:53:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0203361501_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Mar 15 19:57:20 2012] Not generating rmf since there are only 53 counts
[Thu Mar 15 19:57:20 2012] rmf not generated due to insufficient counts
[Thu Mar 15 20:14:29 2012] Updating aperture counts using extracted products
[Thu Mar 15 20:14:29 2012] Error reading totcts from fullrun_mos1_xmm0203361501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Mar 15 20:14:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 20:14:29 2012] Using photon index=1.80, rate=0.00176, arf fullrun_mos1_xmm0203361501_pi300-10000_pass1_cl_src12.arf
[Thu Mar 15 20:14:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 20:14:29 2012] Updating source flux to 2.6e-14
[Thu Mar 15 20:14:31 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Mar 15 20:14:32 2012] xmm0203361501/analysis//spectral/fullrun_mos1_xmm0203361501_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete