[Mon Mar 19 21:18:40 2012] Detection parameters:
  Position = (314.1, 228.9) = 10 0 20.46 2 9 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.0 +/- 10.8
  Background counts = 23.2
  Rate = 0.002 +/- 0.0004

[Mon Mar 19 21:18:40 2012] Off-axis axis estimate = 5.17'
[Tue Mar 20 00:14:24 2012] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 00:14:24 2012] Initial guess for spatial extent in simple fitting = 9.01"
[Tue Mar 20 00:14:24 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.134
[Tue Mar 20 00:14:24 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.01"
[Tue Mar 20 00:52:01 2012] fullrun_mos2_xmm0203361301_pi300-10000_cl_pass0_src17.ximg exists
[Tue Mar 20 00:52:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203361301_pi300-10000_cl_pass0_src17.csv
[Tue Mar 20 00:52:01 2012] fullrun_mos2_xmm0203361301_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Mar 20 00:52:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203361301_pi300-10000_cl_pass0_src17.csv
[Tue Mar 20 00:52:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203361301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203361301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 00:52:01 2012] fullrun_mos2_xmm0203361301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Mar 20 00:52:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203361301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue Mar 20 00:52:01 2012] fullrun_mos2_xmm0203361301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Mar 20 00:52:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203361301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue Mar 20 00:52:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203361301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203361301_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 00:52:21 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 12.211210 pixels away
[Tue Mar 20 00:52:21 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 00:52:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 00:52:21 2012] Assessing source extent using major
[Tue Mar 20 00:52:21 2012] Source does appear to be extended
[Tue Mar 20 00:52:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 03:16:48 2012] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 03:16:48 2012] Initial guess for spatial extent in simple fitting = 9.01"
[Tue Mar 20 03:16:48 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.134
[Tue Mar 20 03:16:48 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 9.01"
[Tue Mar 20 03:52:04 2012] fullrun_mos2_xmm0203361301_pi300-10000_cl_pass1_src15.ximg exists
[Tue Mar 20 03:52:04 2012] fullrun_mos2_xmm0203361301_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Mar 20 03:52:04 2012] Fit fullrun_mos2_xmm0203361301_pi300-10000_cl_pass1_src15 appears to have run properly
[Tue Mar 20 03:52:04 2012] fullrun_mos2_xmm0203361301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Mar 20 03:52:04 2012] fullrun_mos2_xmm0203361301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Mar 20 03:52:04 2012] Fit fullrun_mos2_xmm0203361301_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Mar 20 03:52:32 2012] Spatial fit model total counts = 119.351000, observed total counts = 112.000000
[Tue Mar 20 03:52:32 2012] Offset between fit and detection position for source 13 = 0.373745 pixels
[Tue Mar 20 03:52:32 2012] 117.132900 total counts/ 91.019400 bgd. counts: snr = 2.737147
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.373745 pixels
  Position = (314.2, 229.2) = 10 0 20.44 2 9 14.1
  Extent = 3.7 (2.7-6.3)", rotation angle = 0
  Source counts = 26.1 +/- 10.8
  Background counts = 91.0
  Rate = 0.0009 +/- 0.0004
[Tue Mar 20 03:52:32 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:52:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:52:32 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 03:52:32 2012] Source does appear to be extended
[Tue Mar 20 03:52:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 05:30:34 2012] XMMSAS src. selection expression = ellipse(27283.711220, 19893.831400, 223.750206, 223.750206, 0.000000, X, Y)
[Tue Mar 20 05:30:34 2012] Writing source region out to fullrun_mos2_xmm0203361301_pi300-10000_pass1_cl_src13_src.reg
[Tue Mar 20 05:30:34 2012] Extracting stamp from image fullrun_mos2_xmm0203361301_pi300-10000_cl_sm2.00.img.gz, (301, 216) - (327, 242)
[Tue Mar 20 05:30:34 2012] XMMSAS bgd. selection expression = annulus(27283.711220, 19893.831400, 372.917011, 745.834021, X, Y)
[Tue Mar 20 05:30:34 2012] Writing fullrun_mos2_xmm0203361301_pi300-10000_pass1_cl_src13.gif
[Tue Mar 20 05:36:17 2012] Mean detx,y = (258.03, 4473.77) 
[Tue Mar 20 05:36:19 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 20 05:36:30 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 20 05:36:30 2012] Setting source spectrum file to fullrun_mos2_xmm0203361301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Mar 20 05:36:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0203361301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Mar 20 05:39:34 2012] Not generating rmf since there are only 26 counts
[Tue Mar 20 05:39:34 2012] rmf not generated due to insufficient counts
[Tue Mar 20 05:41:04 2012] Updating aperture counts using extracted products
[Tue Mar 20 05:41:05 2012] Error reading totcts from fullrun_mos2_xmm0203361301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Mar 20 05:41:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 20 05:41:06 2012] Using photon index=1.80, rate=0.000927, arf fullrun_mos2_xmm0203361301_pi300-10000_pass1_cl_src13.arf
[Tue Mar 20 05:41:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 20 05:41:06 2012] Updating source flux to 1.8e-14
[Tue Mar 20 05:41:09 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Mar 20 05:41:10 2012] xmm0203361301/analysis//spectral/fullrun_mos2_xmm0203361301_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete