[Mon Mar 19 21:18:02 2012] Detection parameters:
  Position = (297.4, 86.1) = 10 0 25.30 1 58 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 513.7 +/- 27.1
  Background counts = 14.3
  Rate = 0.02 +/- 0.0009

[Mon Mar 19 21:18:03 2012] Off-axis axis estimate = 15.40'
[Mon Mar 19 23:31:43 2012] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 23:31:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar 19 23:31:43 2012] Initial guess for spatial extent in simple fitting = 14.13"
[Mon Mar 19 23:31:43 2012] source mask rpix=3.2, npix_max = 56, mask sum = 56, frac = 0.997
[Mon Mar 19 23:31:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 14.13"
[Tue Mar 20 00:14:23 2012] fullrun_mos1_xmm0203361301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 20 00:14:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361301_pi300-10000_cl_pass0_src1.csv
[Tue Mar 20 00:14:23 2012] fullrun_mos1_xmm0203361301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 20 00:14:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361301_pi300-10000_cl_pass0_src1.csv
[Tue Mar 20 00:14:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203361301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203361301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 00:14:24 2012] fullrun_mos1_xmm0203361301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 20 00:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Mar 20 00:14:24 2012] fullrun_mos1_xmm0203361301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 20 00:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Mar 20 00:14:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203361301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203361301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 00:52:17 2012] Spatial fit model total counts = 666.869000, observed total counts = 489.000000
[Tue Mar 20 00:52:17 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 20 00:52:17 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 00:52:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 00:52:17 2012] Assessing source extent using major
[Tue Mar 20 00:52:17 2012] Source does appear to be extended
[Tue Mar 20 00:52:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 02:29:18 2012] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 02:29:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 20 02:29:18 2012] Initial guess for spatial extent in simple fitting = 14.13"
[Tue Mar 20 02:29:18 2012] source mask rpix=3.2, npix_max = 56, mask sum = 56, frac = 0.997
[Tue Mar 20 02:29:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.13"
[Tue Mar 20 03:16:47 2012] fullrun_mos1_xmm0203361301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 20 03:16:47 2012] fullrun_mos1_xmm0203361301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 20 03:16:47 2012] Fit fullrun_mos1_xmm0203361301_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Mar 20 03:16:48 2012] fullrun_mos1_xmm0203361301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 20 03:16:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar 20 03:16:48 2012] fullrun_mos1_xmm0203361301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 20 03:16:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar 20 03:16:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203361301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203361301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:52:27 2012] Source 1 is offset by -4.411791 and -5.756289 pixels which is larger than
2 X fitted extent = 0.601678 x 0.601678, not incorporating fit results
[Tue Mar 20 03:52:27 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:52:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:52:27 2012] Assessing source extent using major
[Tue Mar 20 03:52:27 2012] Source does appear to be extended
[Tue Mar 20 03:52:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 05:18:04 2012] XMMSAS src. selection expression = ellipse(25825.440186, 7438.468887, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 20 05:18:04 2012] Writing source region out to fullrun_mos1_xmm0203361301_pi300-10000_pass1_cl_src1_src.reg
[Tue Mar 20 05:18:04 2012] Extracting stamp from image fullrun_mos1_xmm0203361301_pi300-10000_cl_sm2.00.img.gz, (260, 49) - (335, 124)
[Tue Mar 20 05:18:04 2012] XMMSAS bgd. selection expression = annulus(25825.440186, 7438.468887, 1087.500000, 2175.000000, X, Y)
[Tue Mar 20 05:18:04 2012] Writing fullrun_mos1_xmm0203361301_pi300-10000_pass1_cl_src1.gif
[Tue Mar 20 05:18:07 2012] Mean detx,y = (15718.68, 5528.27) 
[Tue Mar 20 05:18:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 20 05:18:37 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 20 05:18:37 2012] Setting source spectrum file to fullrun_mos1_xmm0203361301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 20 05:18:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0203361301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Mar 20 05:27:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 20 05:27:43 2012] rmf not generated due to insufficient counts
[Tue Mar 20 05:41:01 2012] Updating aperture counts using extracted products
[Tue Mar 20 05:41:01 2012] Error reading totcts from fullrun_mos1_xmm0203361301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 20 05:41:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 20 05:41:02 2012] Using photon index=1.80, rate=0.0163, arf fullrun_mos1_xmm0203361301_pi300-10000_pass1_cl_src1.arf
[Tue Mar 20 05:41:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 20 05:41:02 2012] Updating source flux to 4.6e-13
[Tue Mar 20 05:41:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Mar 20 05:41:09 2012] xmm0203361301/analysis//spectral/fullrun_mos1_xmm0203361301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete