[Sun Jun 16 05:48:39 2013] Detection parameters:
  Position = (390.3, 108.8) = 9 59 58.46 2 15 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.3 +/- 11.5
  Background counts = 22.4
  Rate = 0.002 +/- 0.0003

[Sun Jun 16 05:48:39 2013] Off-axis axis estimate = 15.28'
[Sun Jun 16 05:49:17 2013] Using EEF radius (= 14.07 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 05:49:17 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 16 05:49:17 2013] Initial guess for spatial extent in simple fitting = 14.07"
[Sun Jun 16 05:49:17 2013] source mask rpix=3.2, npix_max = 55, mask sum = 44, frac = 0.789
[Sun Jun 16 05:49:17 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 14.07"
[Sun Jun 16 05:49:18 2013] fullrun_mos1_xmm0203361201_pi300-10000_cl_pass0_src19.ximg exists
[Sun Jun 16 05:49:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361201_pi300-10000_cl_pass0_src19.csv
[Sun Jun 16 05:49:18 2013] fullrun_mos1_xmm0203361201_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Jun 16 05:49:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361201_pi300-10000_cl_pass0_src19.csv
[Sun Jun 16 05:49:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203361201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203361201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 05:49:19 2013] fullrun_mos1_xmm0203361201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Jun 16 05:49:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Jun 16 05:49:19 2013] fullrun_mos1_xmm0203361201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Jun 16 05:49:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Jun 16 05:49:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203361201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203361201_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 05:49:42 2013] Spatial fit model total counts = 163.981000, observed total counts = 111.000000
[Sun Jun 16 05:49:42 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 05:49:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 05:49:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 05:49:42 2013] Assessing source extent using major
[Sun Jun 16 05:49:42 2013] Source does appear to be extended
[Sun Jun 16 05:49:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 05:50:11 2013] Using EEF radius (= 14.07 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 05:50:11 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 16 05:50:11 2013] Initial guess for spatial extent in simple fitting = 14.07"
[Sun Jun 16 05:50:11 2013] source mask rpix=3.2, npix_max = 55, mask sum = 44, frac = 0.789
[Sun Jun 16 05:50:11 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 14.07"
[Sun Jun 16 05:50:12 2013] fullrun_mos1_xmm0203361201_pi300-10000_cl_pass1_src19.ximg exists
[Sun Jun 16 05:50:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361201_pi300-10000_cl_pass1_src19.csv
[Sun Jun 16 05:50:12 2013] fullrun_mos1_xmm0203361201_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Jun 16 05:50:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361201_pi300-10000_cl_pass1_src19.csv
[Sun Jun 16 05:50:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203361201_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203361201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 05:50:12 2013] fullrun_mos1_xmm0203361201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Jun 16 05:50:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361201_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun Jun 16 05:50:12 2013] fullrun_mos1_xmm0203361201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Jun 16 05:50:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203361201_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun Jun 16 05:50:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203361201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203361201_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 05:50:35 2013] Source 20 is offset by 0.523613 and -2.397476 pixels which is larger than
2 X fitted extent = 1.540423 x 1.540423, not incorporating fit results
[Sun Jun 16 05:50:35 2013] Spatial fit model total counts = 131.815000, observed total counts = 111.000000
[Sun Jun 16 05:50:35 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 05:50:35 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 05:50:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 05:50:35 2013] Assessing source extent using major
[Sun Jun 16 05:50:35 2013] Source does appear to be extended
[Sun Jun 16 05:50:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 05:51:24 2013] XMMSAS src. selection expression = ellipse(33911.690338, 9415.283562, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 05:51:24 2013] Not overwriting source region fullrun_mos1_xmm0203361201_pi300-10000_pass1_cl_src20_src.reg
[Sun Jun 16 05:51:24 2013] Extracting stamp from image fullrun_mos1_xmm0203361201_pi300-10000_cl_sm2.00.img.gz, (353, 71) - (428, 146)
[Sun Jun 16 05:51:24 2013] XMMSAS bgd. selection expression = annulus(33911.690338, 9415.283562, 1087.500000, 2175.000000, X, Y) && !ellipse(32804.006805, 10663.426109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34940.221588, 11299.121063, 524.961210, 133.276086, 141.144107, X, Y)
[Sun Jun 16 05:51:24 2013] Writing fullrun_mos1_xmm0203361201_pi300-10000_pass1_cl_src20.gif
[Sun Jun 16 05:56:14 2013] Mean detx,y = (16832.72, -2286.00) 
[Sun Jun 16 05:56:16 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 05:56:40 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 05:56:41 2013] Setting source spectrum file to fullrun_mos1_xmm0203361201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Jun 16 05:56:41 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0203361201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun Jun 16 06:08:20 2013] Not generating rmf since there are only 59 counts
[Sun Jun 16 06:08:20 2013] rmf not generated due to insufficient counts
[Sun Jun 16 06:10:02 2013] Updating aperture counts using extracted products
[Sun Jun 16 06:10:02 2013] Total counts from fullrun_mos1_xmm0203361201_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 67.00
[Sun Jun 16 06:10:02 2013] Total counts from fullrun_mos1_xmm0203361201_pi300-10000_pass1_cl_src20_bgd.pi.gz = 140.00
[Sun Jun 16 06:10:02 2013] Got source and background scale factors 886076.000000, 3665545.000000
[Sun Jun 16 06:10:02 2013] User source parameters:
  Position = (390.3, 108.8) = 9 59 58.46 2 15 31.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 33.2 +/- 9.2
  Background aperture counts = 33.8
  Rate = 0.001 +/- 0.0003

[Sun Jun 16 06:10:02 2013] Updating counts from extracted products
[Sun Jun 16 06:10:02 2013] Set source signif. to 33.16/5.82 = 5.70
[Sun Jun 16 06:10:04 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 06:10:04 2013] Using photon index=1.80, rate=0.0012, arf fullrun_mos1_xmm0203361201_pi300-10000_pass1_cl_src20.arf
[Sun Jun 16 06:10:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 06:10:04 2013] Updating source flux to 5.1e-14
[Sun Jun 16 06:10:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 06:10:18 2013] xmm0203361201/analysis//spectral/fullrun_mos1_xmm0203361201_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete