[Thu Jun 14 15:38:20 2012] Detection parameters:
  Position = (388.2, 433.2) = 10 0 58.61 1 54 1.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.0 +/- 18.3
  Background counts = 53.5
  Rate = 0.005 +/- 0.0007

[Thu Jun 14 15:38:20 2012] Off-axis axis estimate = 11.74'
[Thu Jun 14 15:40:19 2012] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:40:19 2012] Initial guess for spatial extent in simple fitting = 12.30"
[Thu Jun 14 15:40:19 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.948
[Thu Jun 14 15:40:19 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.30"
[Thu Jun 14 16:16:27 2012] fullrun_pn_xmm0203361001_pi300-10000_cl_pass0_src9.ximg exists
[Thu Jun 14 16:16:27 2012] fullrun_pn_xmm0203361001_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Jun 14 16:16:27 2012] Fit fullrun_pn_xmm0203361001_pi300-10000_cl_pass0_src9 appears to have run properly
[Thu Jun 14 16:16:28 2012] fullrun_pn_xmm0203361001_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Jun 14 16:16:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203361001_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Jun 14 16:16:28 2012] fullrun_pn_xmm0203361001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jun 14 16:16:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203361001_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Jun 14 16:16:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0203361001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0203361001_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 16:31:19 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.900911 pixels away
[Thu Jun 14 16:31:19 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 16:31:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 16:31:19 2012] Assessing source extent using major
[Thu Jun 14 16:31:19 2012] Source does appear to be extended
[Thu Jun 14 16:31:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 16:31:28 2012] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 16:31:28 2012] Initial guess for spatial extent in simple fitting = 12.30"
[Thu Jun 14 16:31:28 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.948
[Thu Jun 14 16:31:28 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 12.30"
[Thu Jun 14 17:08:52 2012] fullrun_pn_xmm0203361001_pi300-10000_cl_pass1_src9.ximg exists
[Thu Jun 14 17:08:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203361001_pi300-10000_cl_pass1_src9.csv
[Thu Jun 14 17:08:52 2012] fullrun_pn_xmm0203361001_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Jun 14 17:08:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0203361001_pi300-10000_cl_pass1_src9.csv
[Thu Jun 14 17:08:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0203361001_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0203361001_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 17:08:52 2012] fullrun_pn_xmm0203361001_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Jun 14 17:08:52 2012] fullrun_pn_xmm0203361001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jun 14 17:08:52 2012] Fit fullrun_pn_xmm0203361001_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Jun 14 17:19:56 2012] Spatial fit model total counts = 320.408000, observed total counts = 297.000000
[Thu Jun 14 17:19:56 2012] Offset between fit and detection position for source 9 = 0.156958 pixels
[Thu Jun 14 17:19:56 2012] 317.015900 total counts/ 264.236000 bgd. counts: snr = 3.246927
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.156958 pixels
  Position = (388.2, 433.1) = 10 0 58.60 1 53 60.0
  Extent = 4.9 (3.1-7.3)", rotation angle = 0
  Source counts = 52.8 +/- 17.8
  Background counts = 264.2
  Rate = 0.003 +/- 0.001
[Thu Jun 14 17:19:56 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 17:19:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 17:19:56 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 17:19:56 2012] Source does appear to be extended
[Thu Jun 14 17:19:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 17:20:04 2012] XMMSAS src. selection expression = ellipse(33727.064400, 37629.228200, 292.303808, 292.303808, 0.000000, X, Y)
[Thu Jun 14 17:20:04 2012] Writing source region out to fullrun_pn_xmm0203361001_pi300-10000_pass1_cl_src9_src.reg
[Thu Jun 14 17:20:04 2012] Extracting stamp from image fullrun_pn_xmm0203361001_pi300-10000_cl_sm2.00.img.gz, (371, 416) - (405, 450)
[Thu Jun 14 17:20:04 2012] XMMSAS bgd. selection expression = annulus(33727.064400, 37629.228200, 487.173014, 974.346028, X, Y)
[Thu Jun 14 17:20:04 2012] Writing fullrun_pn_xmm0203361001_pi300-10000_pass1_cl_src9.gif
[Thu Jun 14 17:23:53 2012] Mean detx,y = (-12468.15, 9713.96) 
[Thu Jun 14 17:23:55 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 17:24:07 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 17:24:07 2012] Setting source spectrum file to fullrun_pn_xmm0203361001_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jun 14 17:24:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0203361001_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Jun 14 17:32:04 2012] Not generating rmf since there are only 52 counts
[Thu Jun 14 17:32:04 2012] rmf not generated due to insufficient counts
[Thu Jun 14 17:52:09 2012] Updating aperture counts using extracted products
[Thu Jun 14 17:52:09 2012] Error reading totcts from fullrun_pn_xmm0203361001_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jun 14 17:52:10 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 17:52:10 2012] Using photon index=1.80, rate=0.00321, arf fullrun_pn_xmm0203361001_pi300-10000_pass1_cl_src9.arf
[Thu Jun 14 17:52:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 17:52:10 2012] Updating source flux to 3.6e-14
[Thu Jun 14 17:52:26 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 14 17:52:27 2012] xmm0203361001/analysis//spectral/fullrun_pn_xmm0203361001_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete