[Wed May  1 19:38:03 2013] Detection parameters:
  Position = (389.9, 115.3) = 10 0 58.17 1 45 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177.6 +/- 21.4
  Background counts = 79.3
  Rate = 0.005 +/- 0.0006

[Wed May  1 19:38:03 2013] Off-axis axis estimate = 14.84'
[Wed May  1 20:27:17 2013] Using EEF radius (= 13.85 ")to estimate initial spatial extent for simple fitting
[Wed May  1 20:27:17 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 20:27:17 2013] Initial guess for spatial extent in simple fitting = 13.85"
[Wed May  1 20:27:17 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.032
[Wed May  1 20:27:17 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 13.85"
[Wed May  1 20:34:11 2013] fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_src6.ximg exists
[Wed May  1 20:34:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_src6.csv
[Wed May  1 20:34:11 2013] fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed May  1 20:34:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_src6.csv
[Wed May  1 20:34:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 20:34:11 2013] fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed May  1 20:34:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed May  1 20:34:11 2013] fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed May  1 20:34:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed May  1 20:34:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 20:34:22 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 17.865465 pixels away
[Wed May  1 20:34:22 2013] Vigneting correction estimate = 1.000000
[Wed May  1 20:34:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 20:34:22 2013] Assessing source extent using major
[Wed May  1 20:34:22 2013] Source does appear to be extended
[Wed May  1 20:34:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 21:26:34 2013] Using EEF radius (= 13.85 ")to estimate initial spatial extent for simple fitting
[Wed May  1 21:26:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 21:26:34 2013] Initial guess for spatial extent in simple fitting = 13.85"
[Wed May  1 21:26:34 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.032
[Wed May  1 21:26:34 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 13.85"
[Wed May  1 21:37:00 2013] fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_src6.ximg exists
[Wed May  1 21:37:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_src6.csv
[Wed May  1 21:37:00 2013] fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed May  1 21:37:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_src6.csv
[Wed May  1 21:37:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 21:37:00 2013] fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed May  1 21:37:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed May  1 21:37:00 2013] fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed May  1 21:37:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed May  1 21:37:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 21:37:12 2013] Spatial fit model total counts = 205.199000, observed total counts = 181.000000
[Wed May  1 21:37:12 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  1 21:37:12 2013] Vigneting correction estimate = 1.000000
[Wed May  1 21:37:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 21:37:12 2013] Assessing source extent using major
[Wed May  1 21:37:12 2013] Source does appear to be extended
[Wed May  1 21:37:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 22:13:28 2013] XMMSAS src. selection expression = ellipse(33871.809143, 9984.373161, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  1 22:13:28 2013] Writing source region out to fullrun_mos2_xmm0203360901_pi300-10000_pass1_cl_src2_src.reg
[Wed May  1 22:13:28 2013] Extracting stamp from image fullrun_mos2_xmm0203360901_pi300-10000_cl_sm2.00.img.gz, (352, 78) - (427, 153)
[Wed May  1 22:13:28 2013] XMMSAS bgd. selection expression = annulus(33871.809143, 9984.373161, 1087.500000, 2175.000000, X, Y)
[Wed May  1 22:13:28 2013] Writing fullrun_mos2_xmm0203360901_pi300-10000_pass1_cl_src2.gif
[Wed May  1 22:15:04 2013] Mean detx,y = (3372.89, 16007.56) 
[Wed May  1 22:15:05 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  1 22:15:21 2013] Binned source spectrum to 10 counts/bin
[Wed May  1 22:15:22 2013] Setting source spectrum file to fullrun_mos2_xmm0203360901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May  1 22:15:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0203360901_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May  1 22:23:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  1 22:23:03 2013] rmf not generated due to insufficient counts
[Wed May  1 22:24:39 2013] Updating aperture counts using extracted products
[Wed May  1 22:24:39 2013] Total counts from fullrun_mos2_xmm0203360901_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 139.00
[Wed May  1 22:24:39 2013] Total counts from fullrun_mos2_xmm0203360901_pi300-10000_pass1_cl_src2_bgd.pi.gz = 250.00
[Wed May  1 22:24:39 2013] Got source and background scale factors 1196786.000000, 6151227.000000
[Wed May  1 22:24:39 2013] User source parameters:
  Position = (389.9, 115.3) = 10 0 58.17 1 45 57.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 90.4 +/- 12.8
  Background aperture counts = 48.6
  Rate = 0.004 +/- 0.0005

[Wed May  1 22:24:39 2013] Updating counts from extracted products
[Wed May  1 22:24:39 2013] Set source signif. to 90.36/6.97 = 12.96
[Wed May  1 22:24:40 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 22:24:40 2013] Using photon index=1.80, rate=0.00362, arf fullrun_mos2_xmm0203360901_pi300-10000_pass1_cl_src2.arf
[Wed May  1 22:24:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 22:24:40 2013] Updating source flux to 1.2e-13
[Wed May  1 22:24:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  1 22:24:45 2013] xmm0203360901/analysis//spectral/fullrun_mos2_xmm0203360901_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete