[Wed May  1 19:38:03 2013] Detection parameters:
  Position = (244.0, 379.5) = 10 1 40.50 2 5 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.0 +/- 18.5
  Background counts = 104.4
  Rate = 0.005 +/- 0.0008

[Wed May  1 19:38:03 2013] Off-axis axis estimate = 7.08'
[Wed May  1 20:27:17 2013] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Wed May  1 20:27:17 2013] Initial guess for spatial extent in simple fitting = 9.97"
[Wed May  1 20:27:17 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.962
[Wed May  1 20:27:17 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 9.97"
[Wed May  1 20:34:11 2013] fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_src9.ximg exists
[Wed May  1 20:34:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_src9.csv
[Wed May  1 20:34:11 2013] fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed May  1 20:34:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_src9.csv
[Wed May  1 20:34:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 20:34:11 2013] fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed May  1 20:34:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed May  1 20:34:11 2013] fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed May  1 20:34:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed May  1 20:34:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 20:34:22 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.897381 pixels away
[Wed May  1 20:34:22 2013] Vigneting correction estimate = 1.000000
[Wed May  1 20:34:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 20:34:22 2013] Assessing source extent using major
[Wed May  1 20:34:22 2013] Source does appear to be extended
[Wed May  1 20:34:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 21:26:34 2013] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Wed May  1 21:26:34 2013] Initial guess for spatial extent in simple fitting = 9.97"
[Wed May  1 21:26:34 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.962
[Wed May  1 21:26:34 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 9.97"
[Wed May  1 21:37:00 2013] fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_src9.ximg exists
[Wed May  1 21:37:00 2013] fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed May  1 21:37:00 2013] Fit fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_src9 appears to have run properly
[Wed May  1 21:37:00 2013] fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed May  1 21:37:00 2013] fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed May  1 21:37:00 2013] Fit fullrun_mos2_xmm0203360901_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed May  1 21:37:12 2013] Spatial fit model total counts = 170.188000, observed total counts = 169.000000
[Wed May  1 21:37:12 2013] Offset between fit and detection position for source 1 = 0.485126 pixels
[Wed May  1 21:37:12 2013] 167.861100 total counts/ 106.905000 bgd. counts: snr = 5.895466
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.485126 pixels
  Position = (243.8, 379.1) = 10 1 40.57 2 5 5.9
  Extent = 6.1 (4.6-7.5)", rotation angle = 0
  Source counts = 61.0 +/- 13.0
  Background counts = 106.9
  Rate = 0.002 +/- 0.0005
[Wed May  1 21:37:12 2013] Vigneting correction estimate = 1.000000
[Wed May  1 21:37:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 21:37:12 2013] Assessing source extent using major axis lower bound
[Wed May  1 21:37:12 2013] Source does appear to be extended
[Wed May  1 21:37:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 22:13:28 2013] XMMSAS src. selection expression = ellipse(21158.660000, 32932.705600, 365.643011, 365.643011, 0.000000, X, Y)
[Wed May  1 22:13:28 2013] Writing source region out to fullrun_mos2_xmm0203360901_pi300-10000_pass1_cl_src1_src.reg
[Wed May  1 22:13:28 2013] Extracting stamp from image fullrun_mos2_xmm0203360901_pi300-10000_cl_sm2.00.img.gz, (223, 358) - (265, 400)
[Wed May  1 22:13:28 2013] XMMSAS bgd. selection expression = annulus(21158.660000, 32932.705600, 609.405018, 1218.810035, X, Y)
[Wed May  1 22:13:28 2013] Writing fullrun_mos2_xmm0203360901_pi300-10000_pass1_cl_src1.gif
[Wed May  1 22:16:02 2013] Mean detx,y = (-946.58, -9840.44) 
[Wed May  1 22:16:04 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  1 22:16:18 2013] Binned source spectrum to 10 counts/bin
[Wed May  1 22:16:18 2013] Setting source spectrum file to fullrun_mos2_xmm0203360901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May  1 22:16:18 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0203360901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May  1 22:23:30 2013] Not generating rmf since there are only 60 counts
[Wed May  1 22:23:30 2013] rmf not generated due to insufficient counts
[Wed May  1 22:24:40 2013] Updating aperture counts using extracted products
[Wed May  1 22:24:40 2013] Total counts from fullrun_mos2_xmm0203360901_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 85.00
[Wed May  1 22:24:40 2013] Total counts from fullrun_mos2_xmm0203360901_pi300-10000_pass1_cl_src1_bgd.pi.gz = 165.00
[Wed May  1 22:24:40 2013] Got source and background scale factors 417600.000000, 3176747.000000
[Wed May  1 22:24:40 2013] User source parameters:
  Position = (243.8, 379.1) = 10 1 40.57 2 5 5.9
  Extent = 6.1 (4.6-7.5)", rotation angle = 0
  Source aperture counts = 63.3 +/- 10.3
  Background aperture counts = 21.7
  Rate = 0.003 +/- 0.0004

[Wed May  1 22:24:40 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 22:24:40 2013] Using photon index=1.80, rate=0.00244, arf fullrun_mos2_xmm0203360901_pi300-10000_pass1_cl_src1.arf
[Wed May  1 22:24:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 22:24:40 2013] Updating source flux to 4.3e-14
[Wed May  1 22:24:43 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  1 22:24:45 2013] xmm0203360901/analysis//spectral/fullrun_mos2_xmm0203360901_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete