[Wed May  1 19:38:02 2013] Detection parameters:
  Position = (207.8, 315.0) = 10 1 51.01 2 0 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 236.1 +/- 26.0
  Background counts = 74.0
  Rate = 0.01 +/- 0.001

[Wed May  1 19:38:03 2013] Off-axis axis estimate = 6.68'
[Wed May  1 20:15:47 2013] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Wed May  1 20:15:47 2013] Initial guess for spatial extent in simple fitting = 9.77"
[Wed May  1 20:15:47 2013] source mask rpix=2.2, npix_max = 30, mask sum = 21, frac = 0.696
[Wed May  1 20:15:47 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 9.77"
[Wed May  1 20:27:17 2013] fullrun_mos1_xmm0203360901_pi300-10000_cl_pass0_src2.ximg exists
[Wed May  1 20:27:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203360901_pi300-10000_cl_pass0_src2.csv
[Wed May  1 20:27:17 2013] fullrun_mos1_xmm0203360901_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May  1 20:27:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203360901_pi300-10000_cl_pass0_src2.csv
[Wed May  1 20:27:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203360901_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203360901_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 20:27:17 2013] fullrun_mos1_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May  1 20:27:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May  1 20:27:17 2013] fullrun_mos1_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May  1 20:27:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May  1 20:27:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203360901_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 20:34:21 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.584044 pixels away
[Wed May  1 20:34:21 2013] Vigneting correction estimate = 1.000000
[Wed May  1 20:34:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 20:34:21 2013] Assessing source extent using major
[Wed May  1 20:34:21 2013] Source does appear to be extended
[Wed May  1 20:34:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 21:13:23 2013] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Wed May  1 21:13:23 2013] Initial guess for spatial extent in simple fitting = 9.77"
[Wed May  1 21:13:23 2013] source mask rpix=2.2, npix_max = 30, mask sum = 21, frac = 0.696
[Wed May  1 21:13:23 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 9.77"
[Wed May  1 21:26:33 2013] fullrun_mos1_xmm0203360901_pi300-10000_cl_pass1_src2.ximg exists
[Wed May  1 21:26:33 2013] fullrun_mos1_xmm0203360901_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed May  1 21:26:33 2013] Fit fullrun_mos1_xmm0203360901_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed May  1 21:26:34 2013] fullrun_mos1_xmm0203360901_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed May  1 21:26:34 2013] fullrun_mos1_xmm0203360901_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May  1 21:26:34 2013] Fit fullrun_mos1_xmm0203360901_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed May  1 21:37:10 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 36.099687 pixels away
[Wed May  1 21:37:10 2013] Spatial fit model total counts = 211.939000, observed total counts = 199.000000
[Wed May  1 21:37:10 2013] Offset between fit and detection position for source 2 = 1.265742 pixels
[Wed May  1 21:37:10 2013] 215.525000 total counts/ 120.832000 bgd. counts: snr = 8.614437
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.265742 pixels
  Position = (207.0, 316.0) = 10 1 51.24 2 0 31.4
  Extent = 5.0 (3.4-6.3)" x 2.7 (2.4-3.4)", rotation angle = 333 (311-355) degrees
  Source counts = 94.7 +/- 14.7
  Background counts = 120.8
  Rate = 0.004 +/- 0.0006
[Wed May  1 21:37:10 2013] Vigneting correction estimate = 1.000000
[Wed May  1 21:37:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 21:37:10 2013] Assessing source extent using major axis lower bound
[Wed May  1 21:37:10 2013] Source does appear to be extended
[Wed May  1 21:37:10 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97
[Wed May  1 22:07:35 2013] XMMSAS src. selection expression = ellipse(17959.798400, 27443.234534, 297.826209, 162.633005, 333.066305, X, Y)
[Wed May  1 22:07:35 2013] Writing source region out to fullrun_mos1_xmm0203360901_pi300-10000_pass1_cl_src2_src.reg
[Wed May  1 22:07:35 2013] Extracting stamp from image fullrun_mos1_xmm0203360901_pi300-10000_cl_sm2.00.img.gz, (190, 299) - (224, 333)
[Wed May  1 22:07:35 2013] XMMSAS bgd. selection expression = annulus(17959.798400, 27443.234534, 496.377014, 992.754029, X, Y)
[Wed May  1 22:07:35 2013] Writing fullrun_mos1_xmm0203360901_pi300-10000_pass1_cl_src2.gif
[Wed May  1 22:07:44 2013] Mean detx,y = (-5551.85, 5572.09) 
[Wed May  1 22:07:45 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  1 22:07:51 2013] Binned source spectrum to 10 counts/bin
[Wed May  1 22:07:51 2013] Setting source spectrum file to fullrun_mos1_xmm0203360901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May  1 22:07:51 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0203360901_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May  1 22:12:45 2013] Not generating rmf since there are only 94 counts
[Wed May  1 22:12:45 2013] rmf not generated due to insufficient counts
[Wed May  1 22:24:37 2013] Updating aperture counts using extracted products
[Wed May  1 22:24:37 2013] Total counts from fullrun_mos1_xmm0203360901_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 80.00
[Wed May  1 22:24:37 2013] Total counts from fullrun_mos1_xmm0203360901_pi300-10000_pass1_cl_src2_bgd.pi.gz = 113.00
[Wed May  1 22:24:37 2013] Got source and background scale factors 109072.000000, 2063332.000000
[Wed May  1 22:24:37 2013] User source parameters:
  Position = (207.0, 316.0) = 10 1 51.24 2 0 31.4
  Extent = 5.0 (3.4-6.3)" x 2.7 (2.4-3.4)", rotation angle = 333 (311-355) degrees
  Source aperture counts = 74.0 +/- 10.0
  Background aperture counts = 6.0
  Rate = 0.003 +/- 0.0004

[Wed May  1 22:24:38 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 22:24:38 2013] Using photon index=1.80, rate=0.00382, arf fullrun_mos1_xmm0203360901_pi300-10000_pass1_cl_src2.arf
[Wed May  1 22:24:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 22:24:38 2013] Updating source flux to 8.2e-14
[Wed May  1 22:24:41 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  1 22:24:43 2013] xmm0203360901/analysis//spectral/fullrun_mos1_xmm0203360901_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete