[Sun May  5 02:28:48 2013] Detection parameters:
  Position = (201.5, 234.7) = 10 1 53.27 2 24 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.3 +/- 16.2
  Background counts = 9.1
  Rate = 0.009 +/- 0.0009

[Sun May  5 02:28:48 2013] Off-axis axis estimate = 8.41'
[Sun May  5 04:40:23 2013] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Sun May  5 04:40:23 2013] Initial guess for spatial extent in simple fitting = 10.63"
[Sun May  5 04:40:23 2013] source mask rpix=2.4, npix_max = 34, mask sum = 23, frac = 0.663
[Sun May  5 04:40:23 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.63"
[Sun May  5 05:39:58 2013] fullrun_mos2_xmm0203360701_pi300-10000_cl_pass0_src3.ximg exists
[Sun May  5 05:39:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360701_pi300-10000_cl_pass0_src3.csv
[Sun May  5 05:39:58 2013] fullrun_mos2_xmm0203360701_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May  5 05:39:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360701_pi300-10000_cl_pass0_src3.csv
[Sun May  5 05:39:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203360701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203360701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 05:39:58 2013] fullrun_mos2_xmm0203360701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May  5 05:39:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360701_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May  5 05:39:58 2013] fullrun_mos2_xmm0203360701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May  5 05:39:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360701_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May  5 05:39:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203360701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203360701_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 05:40:24 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 13.693842 pixels away
[Sun May  5 05:40:24 2013] Vigneting correction estimate = 1.000000
[Sun May  5 05:40:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 05:40:24 2013] Assessing source extent using major
[Sun May  5 05:40:24 2013] Source does appear to be extended
[Sun May  5 05:40:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 07:41:45 2013] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Sun May  5 07:41:45 2013] Initial guess for spatial extent in simple fitting = 10.63"
[Sun May  5 07:41:45 2013] source mask rpix=2.4, npix_max = 34, mask sum = 23, frac = 0.663
[Sun May  5 07:41:45 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.63"
[Sun May  5 08:33:29 2013] fullrun_mos2_xmm0203360701_pi300-10000_cl_pass1_src3.ximg exists
[Sun May  5 08:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360701_pi300-10000_cl_pass1_src3.csv
[Sun May  5 08:33:29 2013] fullrun_mos2_xmm0203360701_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May  5 08:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360701_pi300-10000_cl_pass1_src3.csv
[Sun May  5 08:33:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203360701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203360701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 08:33:30 2013] fullrun_mos2_xmm0203360701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May  5 08:33:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360701_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May  5 08:33:30 2013] fullrun_mos2_xmm0203360701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May  5 08:33:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360701_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May  5 08:33:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203360701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203360701_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 08:33:55 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 11.858485 pixels away
[Sun May  5 08:33:55 2013] Vigneting correction estimate = 1.000000
[Sun May  5 08:33:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 08:33:55 2013] Assessing source extent using major
[Sun May  5 08:33:55 2013] Source does appear to be extended
[Sun May  5 08:33:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 09:53:27 2013] XMMSAS src. selection expression = ellipse(17486.282562, 20366.984039, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 09:53:27 2013] Writing source region out to fullrun_mos2_xmm0203360701_pi300-10000_pass1_cl_src37_src.reg
[Sun May  5 09:53:27 2013] Extracting stamp from image fullrun_mos2_xmm0203360701_pi300-10000_cl_sm2.00.img.gz, (164, 197) - (239, 272)
[Sun May  5 09:53:27 2013] XMMSAS bgd. selection expression = annulus(17486.282562, 20366.984039, 1087.500000, 2175.000000, X, Y) && !ellipse(15514.226364, 22758.352997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15748.355000, 20479.435800, 398.328011, 224.610406, 43.291816, X, Y) && !ellipse(20413.238000, 21140.510000, 1388.008040, 1388.008040, 0.000000, X, Y)
[Sun May  5 09:53:27 2013] Writing fullrun_mos2_xmm0203360701_pi300-10000_pass1_cl_src37.gif
[Sun May  5 09:53:43 2013] Mean detx,y = (-8749.04, 308.76) 
[Sun May  5 09:53:43 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 09:53:49 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 09:53:49 2013] Setting source spectrum file to fullrun_mos2_xmm0203360701_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun May  5 09:53:49 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0203360701_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sun May  5 10:05:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  5 10:05:36 2013] rmf not generated due to insufficient counts
[Sun May  5 10:16:32 2013] Updating aperture counts using extracted products
[Sun May  5 10:16:32 2013] Total counts from fullrun_mos2_xmm0203360701_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 189.00
[Sun May  5 10:16:33 2013] Total counts from fullrun_mos2_xmm0203360701_pi300-10000_pass1_cl_src37_bgd.pi.gz = 483.00
[Sun May  5 10:16:33 2013] Got source and background scale factors 1103048.000000, 9895476.000000
[Sun May  5 10:16:33 2013] User source parameters:
  Position = (201.5, 234.7) = 10 1 53.27 2 24 36.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 135.2 +/- 14.8
  Background aperture counts = 53.8
  Rate = 0.004 +/- 0.0004

[Sun May  5 10:16:33 2013] Updating counts from extracted products
[Sun May  5 10:16:33 2013] Set source signif. to 135.16/7.34 = 18.42
[Sun May  5 10:16:37 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 10:16:37 2013] Using photon index=1.80, rate=0.00395, arf fullrun_mos2_xmm0203360701_pi300-10000_pass1_cl_src37.arf
[Sun May  5 10:16:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 10:16:37 2013] Updating source flux to 6.3e-14
[Sun May  5 10:16:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 10:16:42 2013] xmm0203360701/analysis//spectral/fullrun_mos2_xmm0203360701_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete