[Sun May  5 02:28:46 2013] Detection parameters:
  Position = (275.2, 357.5) = 10 1 31.89 2 33 37.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.4 +/- 8.3
  Background counts = 8.2
  Rate = 0.002 +/- 0.0003

[Sun May  5 02:28:47 2013] Off-axis axis estimate = 4.60'
[Sun May  5 03:50:58 2013] Using EEF radius (= 8.73 ")to estimate initial spatial extent for simple fitting
[Sun May  5 03:50:58 2013] Initial guess for spatial extent in simple fitting = 8.73"
[Sun May  5 03:50:58 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.995
[Sun May  5 03:50:58 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 8.73"
[Sun May  5 04:40:22 2013] fullrun_mos1_xmm0203360701_pi300-10000_cl_pass0_src28.ximg exists
[Sun May  5 04:40:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203360701_pi300-10000_cl_pass0_src28.csv
[Sun May  5 04:40:22 2013] fullrun_mos1_xmm0203360701_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun May  5 04:40:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203360701_pi300-10000_cl_pass0_src28.csv
[Sun May  5 04:40:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203360701_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203360701_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 04:40:23 2013] fullrun_mos1_xmm0203360701_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun May  5 04:40:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203360701_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun May  5 04:40:23 2013] fullrun_mos1_xmm0203360701_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun May  5 04:40:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0203360701_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun May  5 04:40:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0203360701_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0203360701_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 05:40:16 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 11.574045 pixels away
[Sun May  5 05:40:16 2013] Vigneting correction estimate = 1.000000
[Sun May  5 05:40:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 05:40:16 2013] Assessing source extent using major
[Sun May  5 05:40:16 2013] Source does appear to be extended
[Sun May  5 05:40:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 07:01:01 2013] Using EEF radius (= 8.73 ")to estimate initial spatial extent for simple fitting
[Sun May  5 07:01:01 2013] Initial guess for spatial extent in simple fitting = 8.73"
[Sun May  5 07:01:01 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.995
[Sun May  5 07:01:01 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 8.73"
[Sun May  5 07:41:44 2013] fullrun_mos1_xmm0203360701_pi300-10000_cl_pass1_src27.ximg exists
[Sun May  5 07:41:44 2013] fullrun_mos1_xmm0203360701_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun May  5 07:41:44 2013] Fit fullrun_mos1_xmm0203360701_pi300-10000_cl_pass1_src27 appears to have run properly
[Sun May  5 07:41:45 2013] fullrun_mos1_xmm0203360701_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun May  5 07:41:45 2013] fullrun_mos1_xmm0203360701_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun May  5 07:41:45 2013] Fit fullrun_mos1_xmm0203360701_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sun May  5 08:33:48 2013] Spatial fit model total counts = 120.879000, observed total counts = 113.000000
[Sun May  5 08:33:48 2013] Offset between fit and detection position for source 16 = 0.131896 pixels
[Sun May  5 08:33:48 2013] 122.586100 total counts/ 99.820500 bgd. counts: snr = 2.278606
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.131896 pixels
  Position = (275.1, 357.6) = 10 1 31.91 2 33 36.7
  Extent = 3.7 (2.8-5.4)", rotation angle = 0
  Source counts = 22.8 +/- 11.1
  Background counts = 99.8
  Rate = 0.0007 +/- 0.0003
[Sun May  5 08:33:48 2013] Vigneting correction estimate = 1.000000
[Sun May  5 08:33:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 08:33:48 2013] Assessing source extent using major axis lower bound
[Sun May  5 08:33:48 2013] Source does appear to be extended
[Sun May  5 08:33:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 09:36:17 2013] XMMSAS src. selection expression = ellipse(23889.267400, 31063.027000, 223.711206, 223.711206, 0.000000, X, Y)
[Sun May  5 09:36:17 2013] Writing source region out to fullrun_mos1_xmm0203360701_pi300-10000_pass1_cl_src16_src.reg
[Sun May  5 09:36:17 2013] Extracting stamp from image fullrun_mos1_xmm0203360701_pi300-10000_cl_sm2.00.img.gz, (262, 345) - (288, 370)
[Sun May  5 09:36:17 2013] XMMSAS bgd. selection expression = annulus(23889.267400, 31063.027000, 372.852011, 745.704021, X, Y)
[Sun May  5 09:36:17 2013] Writing fullrun_mos1_xmm0203360701_pi300-10000_pass1_cl_src16.gif
[Sun May  5 09:41:16 2013] Mean detx,y = (-6937.37, -1457.23) 
[Sun May  5 09:41:17 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 09:41:25 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 09:41:25 2013] Setting source spectrum file to fullrun_mos1_xmm0203360701_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun May  5 09:41:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0203360701_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sun May  5 09:52:36 2013] Not generating rmf since there are only 22 counts
[Sun May  5 09:52:36 2013] rmf not generated due to insufficient counts
[Sun May  5 10:16:30 2013] Updating aperture counts using extracted products
[Sun May  5 10:16:30 2013] Total counts from fullrun_mos1_xmm0203360701_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 30.00
[Sun May  5 10:16:30 2013] Total counts from fullrun_mos1_xmm0203360701_pi300-10000_pass1_cl_src16_bgd.pi.gz = 64.00
[Sun May  5 10:16:30 2013] Got source and background scale factors 156800.000000, 1192070.000000
[Sun May  5 10:16:30 2013] User source parameters:
  Position = (275.1, 357.6) = 10 1 31.91 2 33 36.7
  Extent = 3.7 (2.8-5.4)", rotation angle = 0
  Source aperture counts = 21.6 +/- 6.5
  Background aperture counts = 8.4
  Rate = 0.0006 +/- 0.0002

[Sun May  5 10:16:32 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 10:16:32 2013] Using photon index=1.80, rate=0.000666, arf fullrun_mos1_xmm0203360701_pi300-10000_pass1_cl_src16.arf
[Sun May  5 10:16:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 10:16:32 2013] Updating source flux to 1.4e-14
[Sun May  5 10:16:39 2013] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 10:16:40 2013] xmm0203360701/analysis//spectral/fullrun_mos1_xmm0203360701_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete