[Sun Dec 18 15:03:11 2011] Detection parameters:
  Position = (283.5, 284.7) = 10 2 32.35 2 9 55.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.6 +/- 8.2
  Background counts = 9.0
  Rate = 0.001 +/- 0.0003

[Sun Dec 18 15:03:12 2011] Off-axis axis estimate = 1.48'
[Sun Dec 18 17:23:32 2011] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 17:23:32 2011] Initial guess for spatial extent in simple fitting = 7.17"
[Sun Dec 18 17:23:32 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.084
[Sun Dec 18 17:23:32 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 7.17"
[Sun Dec 18 18:17:49 2011] fullrun_mos2_xmm0203360301_pi300-10000_cl_pass0_src35.ximg exists
[Sun Dec 18 18:17:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360301_pi300-10000_cl_pass0_src35.csv
[Sun Dec 18 18:17:49 2011] fullrun_mos2_xmm0203360301_pi300-10000_cl_pass0_src35_1.ximg exists
[Sun Dec 18 18:17:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360301_pi300-10000_cl_pass0_src35.csv
[Sun Dec 18 18:17:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203360301_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203360301_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 18:17:50 2011] fullrun_mos2_xmm0203360301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sun Dec 18 18:17:50 2011] fullrun_mos2_xmm0203360301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sun Dec 18 18:17:50 2011] Fit fullrun_mos2_xmm0203360301_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Sun Dec 18 18:18:11 2011] Source 29 is offset by -3.963751 and -1.916834 pixels which is larger than
2 X fitted extent = 0.821949 x 0.821949, not incorporating fit results
[Sun Dec 18 18:18:11 2011] Spatial fit model total counts = 121.693000, observed total counts = 120.000000
[Sun Dec 18 18:18:11 2011] Offset between fit and detection position for source 29 = 0.149082 pixels
[Sun Dec 18 18:18:11 2011] 125.868600 total counts/ 104.538000 bgd. counts: snr = 2.086248
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.149082 pixels
  Position = (283.3, 284.7) = 10 2 32.40 2 9 55.8
  Extent = 3.8 (1.8-6.1)", rotation angle = 0
  Source counts = 21.3 +/- 11.2
  Background counts = 104.5
  Rate = 0.0007 +/- 0.0004
[Sun Dec 18 18:18:11 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 18:18:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 18:18:11 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 18:18:11 2011] Source does appear to be extended
[Sun Dec 18 18:18:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 20:04:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 20:04:06 2011] Initial guess for spatial extent in simple fitting = 3.83"
[Sun Dec 18 20:04:06 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.181
[Sun Dec 18 20:04:06 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 3.83"
[Sun Dec 18 20:54:27 2011] fullrun_mos2_xmm0203360301_pi300-10000_cl_pass1_src35.ximg exists
[Sun Dec 18 20:54:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360301_pi300-10000_cl_pass1_src35.csv
[Sun Dec 18 20:54:27 2011] fullrun_mos2_xmm0203360301_pi300-10000_cl_pass1_src35_1.ximg exists
[Sun Dec 18 20:54:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0203360301_pi300-10000_cl_pass1_src35.csv
[Sun Dec 18 20:54:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0203360301_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0203360301_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 20:54:27 2011] fullrun_mos2_xmm0203360301_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sun Dec 18 20:54:28 2011] fullrun_mos2_xmm0203360301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sun Dec 18 20:54:28 2011] Fit fullrun_mos2_xmm0203360301_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Sun Dec 18 20:54:48 2011] Spatial fit model total counts = 125.750000, observed total counts = 123.000000
[Sun Dec 18 20:54:48 2011] Offset between fit and detection position for source 29 = 0.050009 pixels
[Sun Dec 18 20:54:48 2011] 129.393800 total counts/ 110.255000 bgd. counts: snr = 1.822702
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.050009 pixels
  Position = (283.3, 284.6) = 10 2 32.39 2 9 55.6
  Extent = 3.7 (1.0-5.9)", rotation angle = 0
  Source counts = 19.1 +/- 11.4
  Background counts = 110.3
  Rate = 0.0006 +/- 0.0004
[Sun Dec 18 20:54:48 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 20:54:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 20:54:48 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 20:54:48 2011] Source does appear to be extended
[Sun Dec 18 20:54:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 22:19:20 2011] XMMSAS src. selection expression = ellipse(24602.008600, 24715.224000, 219.757206, 219.757206, 0.000000, X, Y)
[Sun Dec 18 22:19:20 2011] Writing source region out to fullrun_mos2_xmm0203360301_pi300-10000_pass1_cl_src29_src.reg
[Sun Dec 18 22:19:20 2011] Extracting stamp from image fullrun_mos2_xmm0203360301_pi300-10000_cl_sm2.00.img.gz, (271, 272) - (296, 297)
[Sun Dec 18 22:19:20 2011] XMMSAS bgd. selection expression = annulus(24602.008600, 24715.224000, 366.262011, 732.524021, X, Y) && !ellipse(25546.781586, 24221.444061, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec 18 22:19:20 2011] Writing fullrun_mos2_xmm0203360301_pi300-10000_pass1_cl_src29.gif
[Sun Dec 18 22:30:06 2011] Mean detx,y = (2818.61, -2323.25) 
[Sun Dec 18 22:30:07 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 22:30:14 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 22:30:15 2011] Setting source spectrum file to fullrun_mos2_xmm0203360301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Dec 18 22:30:15 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0203360301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sun Dec 18 22:41:48 2011] Not generating rmf since there are only 19 counts
[Sun Dec 18 22:41:48 2011] rmf not generated due to insufficient counts
[Sun Dec 18 22:42:47 2011] Updating aperture counts using extracted products
[Sun Dec 18 22:42:47 2011] Error reading totcts from fullrun_mos2_xmm0203360301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Dec 18 22:42:48 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 22:42:48 2011] Using photon index=1.80, rate=0.0006, arf fullrun_mos2_xmm0203360301_pi300-10000_pass1_cl_src29.arf
[Sun Dec 18 22:42:48 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 22:42:48 2011] Updating source flux to 8.5e-15
[Sun Dec 18 22:43:17 2011] Flag b found in src. 29 procflags, skipping spectral fitting
[Sun Dec 18 22:43:17 2011] Source 29 has fewer than 100.000000 counts, skipping spectral fitting